GRANT(PI & MEMBERS)
67
PUBLICATIONS
150
INDEXED PUBLICATION
117
TOTAL STUDENTS
H-INDEXED (SCOPUS)
CITATIONS (SCOPUS)
Grant (PI)
INDUSTRY GRANTS
1
NATIONAL GRANTS
6
UNIVERSITY FUND
5
TOTAL
Publications
INDEXED PUBLICATION
117
NON-INDEXED PUBLICATION
9
OTHERS PUBLICATION
24
TOTAL
Supervisions
PHD
29
MASTER
30
TOTAL
Legend : SPONSOR TYPE OF GRANT
| Grant Name | Year |
|---|---|
| Performance Improvement of Continuous Wire Cleaning and Pre-Coating Process Using Cold Plasma RUG OF UTM UTM R&D Fund |
2025 |
| SIRIM- Compliant Transcranial Direct Current Stimulation (tDCS) Device for Treating Metal Illness in Malaysia GLENEAGLES HOSPITAL MEDINI JOHOR Contract |
2024 |
| Program SmarTech 2024 (Teknologi Pintar): Inovasi Produk Mampan Melalui Pembuatan Pintar dan Pencetakan 3D CENTER FOR COMMUNITY AND INDUSTRY NETWORK (CCIN) CCIN AIMS4STAR |
2024 |
| Performance Evaluation of Coolant Concentration When End Milling Hardened Steel Using Coated Carbide Tool RUG OF UTM UTM R&D Fund |
2023 |
| COE/RG 3.0: Intelligent and Sustainable Additive Manufacturing of 3D-printed Complex Engineering Components RUG OF UTM Flagship CoE/RG |
2022 |
| COE/RG 3.1: Service-Oriented Sustainable Design for Additive Manufacturing Platform Based on Open Architecture Data Structure RUG OF UTM Flagship CoE/RG |
2022 |
| Investigation of Cu-Zn-Bi ternary brass alloy coated steel cords for rubber reinforcement RUG OF UTM UTM R&D Fund |
2021 |
| Additive Manufacturing framework based on modified TRIZ-AM principles for complex product design and development RUG OF UTM UTM R&D Fund |
2021 |
| Bone Tissue Engineering Scaffolds Based on Optimized Triply Periodic Minimal Surfaces (TPMS) Designs RUG OF UTM UTM R&D Fund |
2021 |
| UTMIcon 1.1: Development of a metal 3D printer RUG OF UTM UTM RA ICONIC GRANT |
2020 |
| CRG 26.4: PERFORMANCE EVALUATION AND OPTIMIZATION OF MANUFACTURING PROCESS UNIVERSITI MALAYSIA PAHANG Collaborative Research Grant National |
2019 |
| CRG 34.2 : SYNTHESIS OF THE POLY L-LACTIDE ACID (PLLA) AND NANOCELLULOSE/N-DOPED TIO2 AS A NOVEL POLYMERIC NANOCOMPOSITE BIOMATERIAL FOR BONE SCAFFOLD. UNIVERSITI MALAYSIA PAHANG Collaborative Research Grant National |
2019 |
| PERFORMANCE OF LOW-POWER LASER MACHINING AND FABRICATION OF AEROSPACE MATERIAL RUG OF UTM UTM Encouragement Research |
2019 |
| INVESTIGATION ON THE EFFECT OF NUTRIENT ALLOYING ELEMENTS IN BIODEGRADABLE MG-BASED ORTHOPEDIC IMPLANT RUG OF UTM UTM Encouragement Research |
2019 |
| FEASIBLE PRINTING PARAMETERS OF BIODEGRADABLE OF POLY (ETHYLENE GLYCOL)-DIACRYLATE FILLED ARAMID NANOFIBER HYDROGEL FOR 3D TISSUE ENGINEERING SCAFFOLD KISWIRE SDN. BHD. Contract |
2019 |
| KTP-NMG 2019:PEMBANGUNAN PUSAT LATIHAN KAKISAN UTM-MACH3 RUG OF UTM Business Entity |
2019 |
| UTM-TDR 16.4 (T1): Highly flexible and conductive graphene/CNTs-polymer composite for medical electrode. RUG OF UTM UTM Transdiciplinary Research Grant |
2018 |
| UTM-TDR 10.4 (T2) Optimization of Cold-Drawn Steel Wire Rope RUG OF UTM UTM Transdiciplinary Research Grant |
2018 |
| UTM-TDR 10: NEW GENERATION MATERIALS WITH ULTRAHIGH PERFORMANCE FOR HIGH IMPACT INDUSTRIES RUG OF UTM UTM Transdiciplinary Research Grant |
2018 |
| UTM-TDR 16.1 (T2): Design and development of medical plastic enclosure based on IEC 60601-1 standard RUG OF UTM UTM Transdiciplinary Research Grant |
2018 |
| UTM-TDR 16.2(T1): STABILITY ANALYSIS AND CURRENT MONITORING FOR EFFECTIVE WEARABLE TREATMENT RUG OF UTM UTM Transdiciplinary Research Grant |
2018 |
| UTM-TDR 16.3(T1): Head Profile Scanning and Position Analysis in the Development of Ergonomics Wearable For Malaysian Population RUG OF UTM UTM Transdiciplinary Research Grant |
2018 |
| UTM-TDR 16 : MEDICAL DEVICE FOR THE TREATMENT OF MENTAL ILLNESS FOR MALAYSIAN PATIENT RUG OF UTM UTM Transdiciplinary Research Grant |
2018 |
| HIR 5.1 : Performance Evaluation of Carbide Tools During High Speed Machining of Advanced Materials RUG OF UTM High Impact Research Grant |
2018 |
| DEVELOPMENT OF ARAMIDE NANOFIBERS FILLED POLY-L-LACTIC ACID (PLLA)/POLYURETHANE (PU) FOR TISSUE ENGINEERING SCAFFOLD RUG OF UTM Tier 1 |
2018 |
| MATHEMATICAL MODELING OF FRICTION STIR WELDING PROCESS RUG OF UTM Tier 2 |
2018 |
| THE EFFECT OF COLD AIR AND NANOLUBRICANTS ON HIGH SPEED MILLING OF ADVANCED MATERIALS RUG OF UTM Tier 1 |
2018 |
| DEVELOPMENT AND ANALYSIS OF PORTABLE LOW DIRECT CURRENT STIMULATION DEVICE FOR MEDICAL APPLICATIONS RUG OF UTM Tier 1 |
2017 |
| ELECTROSPUN ARAMIDE NANOFIBERS FILLED POLY-VINYL ALCOHOL FOR TISSUE ENGINEERING SCAFFOLD RUG OF UTM Tier 1 |
2017 |
| Investigation on the effect of drilling parameters on strength and fatigue life of fibre-metal laminates. RUG OF UTM Tier 1 |
2017 |
| Evaluation of Nanoparticles as Additives in Lubricant In High Speed Machining of Advanced Materials RUG OF UTM Tier 1 |
2017 |
| EVALUATION OF MICROSTRUCTURE AND MECHANICAL PROPERTIES OF FLY ASH-REINFORCED ALUMINUM MATRIX COMPOSITES USING A 3D PRINTING TECHNIQUE RUG OF UTM Tier 1 |
2017 |
| DEVELOPMENT OF NANO-ENHANCED LUBRICANT IN MINIMUM QUANTITY LUBRICATION FOR MACHINING ADVANCED MATERIALS. RUG OF UTM Geran Penyelidik Baharu |
2017 |
| DEVELOPMENT OF TRANSPARENT AND FLEXIBLE GRAPHENE COATED CONDUCTIVE ELECTRODE RUG OF UTM Tier 1 |
2016 |
| RESEARCH & DEVELOPMENT & COMMERCIALISATION OF LED LIGHTING SYSTEM & SOLAR TECHNOLOGY APPLICATION AMAN NODA LED SDN. BHD. Contract |
2015 |
| MACHINABILITY OF ADVANCED MATERIALS FOR MEDICAL DEVICES AND ENGINEERING APPLICATIONS RUG OF UTM Tier 1 |
2014 |
| Towards achieving ductile mode machining of bones through ultraprecision turning process Fundamental Research Grant Scheme |
2013 |
| MACHINABILITY ANALYSIS ON MACHINING OF BONES RUG OF UTM Tier 2 |
2012 |
| Eploration on the Use of Fused Deposition Modeling for Accurate & Complete Modelling on Anatomical Joints Exploratory Research Grant Scheme |
2011 |
| Surface Treatment of Biomedical Grade Titanium for Hard Tissue Repair Using TiN and Diamond RUG OF UTM Tier 1 |
2011 |
| Evaluation of Coolant Strategies in High Speed Machining (HSM) of Advanced Materials RUG OF UTM Tier 1 |
2011 |
| DEVELOPMENT OF IN- SITU MAGNESIUM-SILICON REINFORCED ALUMNIUM COMPOSITES RUG OF UTM Tier 1 |
2011 |
| A Study On The Effect Of Carbon Content Of Cobalt Chrome Molybdenum Alloys To Diamond Coating Surface Treatment Fundamental Research Grant Scheme |
2010 |
| Design and Fabrication Of Specialized High Flexion (HF) Knee Implants Fortified By Nanocrystalline Diamond Coatings MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund |
2009 |
| Determination of the Optimum Cutting Conditions for Coated Carbide and Ceramic Cutting Tools When Turning Hardened Tool Steel Sciencefund |
2000 |
| Development of Endmills, Drills and Turning Tools From Ultra Fine Grained Carbides And Oxides For Aerospace, Automotive and Mold & Die MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund |
2000 |
| Development Of New Binderless Diamond Layered Wheels For Ultra-Precision Grinding MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund |
2000 |
| Development of Ultra-Thin Coated Precision Tools For Turning And Milling MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund |
2000 |
| Ultra-Precision Turning of Symmetrical and Non-Symmetrical Silicon Surfaces for Laser Application MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund |
1999 |
| Production of Composite Hollow Fiber Membranes for Bioseparation MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund |
1999 |
| Performance of Binderless Diamond Grinding Wheels For IC Chip Failure Analysis Contract |
1999 |
| Performance Evalution of Carbide Tools on Machining Aerospace Materials Titanium Alloys MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund |
1998 |
| Fabrication of Laser Crystal for Electro-Optic Application MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund |
1998 |
| Ductile Mode Grinding and Polishing of Aspheric, Toric and Plane Surfaces on Glass and Silicon MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund |
1998 |
| Generation of Asphire Surfaces by Ductile Mode Diamond Grinding and Polishing on Glass and Silicon Short Term |
1995 |
| Machinability Database And Performance Evaluation Of Advanced Cutting Tools For Malaysian Manufacturing Industries MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund |
1995 |
| Design And Development As Semi-Automatic Pineapple Cubing Machine Short Term |
1995 |
| Development of a Manufacturing Process for the Production of Ultra Coatings Based on Cubic Nitride and Carbon Nitride MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund |
1994 |
| Technology Capability Assesment-Case Study for Mould & Die Industry Short Term |
1994 |
| Development of a Computer Aided Software Engineering (CASE) Tool for Mould and Die Design Based on the Product Data Modelling Methodology. MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund |
1992 |
| Development of a Prototype Computer Integrated Manufacturing (CIM) System at UTM. MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund |
1992 |
| Design and Manufacture of Aero Modelling Kit Short Term |
1992 |
| Merekabentuk dan Menghasilkan Enjin Dua Lejang Untuk Kegunaan Umum Short Term |
1992 |
| Precision Machining - Upgrading of a Surface Grinding Machine. Short Term |
1990 |
| Membuat dan menganalisis struktur bahan komposit dibuat dan mengguna kaedah, belitan filamen dan ' puitrusion' Short Term |
1990 |
Legend : PUBLICATION CATEGORY TYPE OF AUTHORS
Legend : IP CATEGORY IP LEVEL
| Intellectual Property Name | Grant Register No. | IP Level | IP Category |
|---|---|---|---|
| INDUSTRIAL ADVISORY PANEL EVALUATION FORM | NATIONAL | COPYRIGHT |
Legend : SESSION LEVEL OF STUDY STATUS SUPERVISION LEVEL
| Supervision List |
|---|
|
THET THET MON MODELLING OF STAGNANT ZONE FORMATION ON DIAMOND CUTTING TOOL WHEN TURNING TITANIUM ALLOY PHD GRADUATED CO-SUPERVISOR 2006 |
|
TAN POH LAI ROUGHNESS AND FUZZINESS OF MACHINED WOOD SURFACES PHD GRADUATED CO-SUPERVISOR 2011 |
|
MAHMOOD ANWAR EFFECT OF OXIDATION ON TITANIUM-ALUMINIUM-NIOBIUM FOR BIOMEDICAL IMPLANT PHD GRADUATED SUPERVISOR 2013 |
|
HABIBALLAH SAFARI HIGH SPEED END MILLING OF TI-6A1-4V EXTRA LOW INTERSTITIAL ALLOY FOR GREEN MACHINING PHD GRADUATED CO-SUPERVISOR 2014 |
|
ENGKU MOHAMMAD NAZIM BIN ENGKU ABU BAKAR SURFACE TREATMENT ON TUNGSTEN CARBIDE SUBSTRATE PRIOR TO HOT FILAMENT CHEMICAL VAPOUR DEPOSITION DIAMOND COATING PHD GRADUATED SUPERVISOR 2014 |
|
HASSAN ABDELWAHAB ABDELKARIM EFFECT OF HEAT TREATED NICKEL INTERLAYER IN ENHANCING DIAMOND DEPOSITION ON TUNGSTEN CARBIDE PHD GRADUATED CO-SUPERVISOR 2014 |
|
HEIDAR HASHEMI A NEW CASE-BASED REASONING APPROACH IN COMPUTER-AIDED FIXTURE DESIGN PHD GRADUATED CO-SUPERVISOR 2014 |
|
DAVOOD ALMASI DEPOSITION OF THE HYDROXYAPATITE PARTICLES ON THE POLYETHER ETHER KETONE SURFACE FOR ORTHOPAEDIC APPLICATIONS PHD GRADUATED SUPERVISOR 2015 |
|
MURTALA SULE DAMBATTA INFLUENCE OF HEAT TREATMENT AND SEVERE PLASTIC DEFORMATION ON ZN-3MG ALLOY PROPERTIES FOR BIO-IMPLANT APPLICATION PHD GRADUATED SUPERVISOR 2015 |
|
MAS AYU BINTI HASSAN EFFECTS OF HYDROXYAPATITE COATING WITH OXIDE INTERLAYER ON BIOACTIVITY PERFORMANCES IN COCRMO ALLOY PHD GRADUATED SUPERVISOR 2015 |
|
RUSDI NUR MACHINABILITY ASSESSMENT WHEN TURNING AISI 316L AUSTENITIC STAINLESS STEEL USING UNCOATED AND COATED CARBIDE INSERTS PHD GRADUATED CO-SUPERVISOR 2015 |
|
ARMAN SHAH BIN ABDULLAH INFLUENCE OF ULTRASONIC VIBRATION ON TIN COATED BIOMEDICAL TI-13ZR-13NB ALLOY PHD GRADUATED SUPERVISOR 2015 |
|
SHAHROUZ ZAMANI KHALAJABADI CORROSION BEHAVIOR AND MECHANICAL PROPERTIES OF SILICON AND ZINC-OXIDE COATED MAGNESIUM-BASED BIONANOCOMPOSITES WITH HYDROXYAPATITE AND TITANIA ADDITIVES PHD GRADUATED CO-SUPERVISOR 2016 |
|
NOOR ADILA BINTI ALUWI SHAKIR MODELING AND OPTIMIZATION OF SPINNING CONDITIONS FOR POLYETHERSULFONE HOLLOW FIBER MEMBRANE FABRICATION USING NON-DOMINATED SORTING GENETIC ALGORITHM-II PHD GRADUATED CO-SUPERVISOR 2016 |
|
MOSTAFA REZAZADEH SHIRDAR HYDROXYAPATITE-TITANIA NANOTUBE COMPOSITE AS A COATING LAYER ON COBALT-CHROMIUM BASED IMPLANT MATERIAL PHD GRADUATED SUPERVISOR 2016 |
|
ZULI`ZAM BIN RASHID ERGONOMIC DESIGN PARAMETERS FOR MALAYSIAN CAR DRIVER SEATING POSITION PHD GRADUATED CO-SUPERVISOR 2017 |
|
ROOZBEH ALIPOUR IMPULSIVE SHEET METAL FORMING BASED ON STANDOFF CHARGE FOR CONICAL GEOMETRY PHD GRADUATED SUPERVISOR 2017 |
|
MOHAMMED MUSTAFA ABEDLHAFD ALHWANI ENHANCED THERMOELECTRIC PROPERTIES OF P-TYPE CALCIUM COBALT OXIDE VIA ALUMINIUM, A1-NI AND POROUS A1-NI CO-DOPINGS PHD GRADUATED SUPERVISOR 2020 |
|
SIDEQ BIN SALLEH PERFORMANCE EVALUATION OF A NEWLY IMPROVED SLURRY FOR CHEMICAL MECHANICAL POLISHING ON ALUMINUM-NICKEL PLATED HARD DISK DRIVE SUBSTRATE PHD GRADUATED SUPERVISOR 2021 |
|
NORAFIFAH BINTI HUSIN OPTIMIZATION POLYETHERSULFONE ULTRAFILTRATION HOLLOW FIBER MEMBRANE FOULING PERFORMANCES USING PARTICLE SWARM OPTIMIZATION PHD GRADUATED CO-SUPERVISOR 2021 |
|
NURULHUDA BT ARIFIN BIODEGRADABLE POLY (ETHYLENE GLYCOL) DIACRYLATE FILLED ARAMID NANOFIBER HYDROGEL THREE DIMENSIONAL PRINTED TISSUE ENGINEERING SCAFFOLD PHD GRADUATED SUPERVISOR 2021 |
|
SADIQ TAOHEED OLOHUNDE ELECTROPHORETIC DEPOSITION OF HYDROXYAPATITE ON HOMOGENIZED MAGNESIUM BASED ALLOY FOR BIOMEDICAL APPLICATIONS PHD GRADUATED SUPERVISOR 2022 |
|
TOTO TRIANTORO BUDI WARDOYO COLD METAL SPINNING OF WELDED THICK PLATE FOR HEMISPHERICAL TANK HEAD PHD GRADUATED CO-SUPERVISOR 2023 |
|
NURUL SHAFYRA BINTI MOHD SABRI EFFECTS OF NUTRIENT ALLOYING ELEMENTS ON BIODEGRADABLE MAGNESIUM FOR ORTHOPAEDIC IMPLANT MATERIALS PHD GRADUATED CO-SUPERVISOR 2023 |
|
AHMED OMAR ASWAYE AMHAMED ROLE OF SILICON CARBIDE ADDITIVES IN REDUCING DEWAXING TIME AND MOULD CRACK IN INVESTMENT CASTING USING MICROWAVE-ASSISTED HEATING PHD GRADUATED CO-SUPERVISOR 2025 |
|
KHIDZIR BIN ZAKARIA ASSESSMENTS OF POST PROCESSING IN POWDER BASED METAL ADDITIVE MANUFACTURING PROCESS PHD ON GOING CO-SUPERVISOR |
|
KHOR CHIN KEAT MACHINING FEATURE RECOGNITION AND COST EVALUATION BY USING CONVOLUTION NEURAL NETWORK ( DEEP LEARNING) PHD ON GOING CO-SUPERVISOR |
|
PARAG SHASHIKANT VICHARE PERFORMANCE EVALUATION OF GRINDING AND LAPPING OPERATIONS FOR GENERATING ASPHERIC SURFACES ON GLASS MOULDS USING VERTICAL MACHINING CENTRE MASTER GRADUATED SUPERVISOR 2006 |
|
DENNI KURNIAWAN MASTER GRADUATED CO-SUPERVISOR 2008 |
|
MAHMOOD ANWAR THEORETICAL AND OPERATING RESONANCE FREQUENCY FOR AN APPLIED THERMOACOUSTIC REFRIGERATOR MASTER GRADUATED SUPERVISOR 2009 |
|
KHOO CHUN YONG ULTRASONIC MACHINING, LAPPING AND POLISHING OF NEODYMIUM DOPED YTTRIUM ALUMINUM GARNET LASER CRYSTAL ROD MASTER GRADUATED CO-SUPERVISOR 2009 |
|
HABIBALLAH SAFARI MASTER GRADUATED SUPERVISOR 2010 |
|
SEYEDHAMED TAGHAVISANGDEHI MASTER GRADUATED SUPERVISOR 2010 |
|
ARMAN SHAH BIN ABDULLAH INFLUENCE OF ULTRASONIC PARAMETERS ON TIN COATED BIOMEDICAL TI13ZR 13NB PROPERTIES MASTER GRADUATED SUPERVISOR 2010 |
|
PAYAM ETMINAN MASTER GRADUATED SUPERVISOR 2010 |
|
IDRIS BIN SAARAN MASTER GRADUATED SUPERVISOR 2010 |
|
NOOR FARIDAH BINTI ABD. KADIR MASTER ON GOING SUPERVISOR |
|
DANIAL GHODSIYEH MASTER GRADUATED SUPERVISOR 2011 |
|
MOSTAFA REZAZADEH SHIRDAR EVALUATING THE SURFACE PROPERTIES OF HYDROXYAPATITE-TITANIUM NANOTUBES COMPOSITE AS A NOVEL COATING LAYER ON COBALT BASED ALLOY MASTER GRADUATED SUPERVISOR 2011 |
|
SHAHIN HAMTAIE POUR SHIRAZIFARD MASTER GRADUATED SUPERVISOR 2012 |
|
HOSSEIN MOHAMMAD KHANLOU MASTER GRADUATED SUPERVISOR 2012 |
|
SEYED SAJAD GHASHAMI MASTER GRADUATED CO-SUPERVISOR 2012 |
|
HAMID HESSAM MASTER GRADUATED SUPERVISOR 2012 |
|
MOHD ZULKHAAIRI BIN TUKIMIN APPLICATION OF RESPONSE SURFACE METHODOLOGY IN OPTIMIZING ELECTROPLATING PARAMETERS OF NICKEL INTERLAYER ON TUNGSTEN CARBIDE MASTER GRADUATED SUPERVISOR 2013 |
|
MARYAM TAMIZI MASTER GRADUATED SUPERVISOR 2013 |
|
ALI KARANDISH MASTER GRADUATED SUPERVISOR 2013 |
|
HIRBOD MALEKI KHEIMEH SARI MASTER GRADUATED SUPERVISOR 2013 |
|
NABEEL NAJM BAHLOL MASTER GRADUATED SUPERVISOR 2014 |
|
SALEM SALAH ABDULLAH BAGABER MASTER GRADUATED SUPERVISOR 2015 |
|
NORFATIN MURSHIDA BINTI MOHAMAD NORDIN MASTER GRADUATED SUPERVISOR 2015 |
|
SUHAIMI BIN SALLEH EFFECTS OF DIE GEOMETRY AND DRAWING SPEEDS ON THE PRODUCTION OF HIGH TENSILE STRENGTH STEEL WIRE MASTER GRADUATED SUPERVISOR 2016 |
|
MOHAMAD TALHAH AL HAFIZ BIN MOHD KHATA MASTER GRADUATED SUPERVISOR 2018 |
|
HAFIZZAL BIN YUSOFF EFFECTS OF MACHINED AND MOULDED PARAMETERS ON POLYOXYMETHYLENE SPUR GEAR LIFE PERFORMANCE MASTER GRADUATED CO-SUPERVISOR 2018 |
|
NUR FARHANA BINTI HASMUNI STRUCTURE AND ELECTRICAL CONDUCTIVITY OF POLYMER BASED GRAPHENE-CARBON NANOTUBES COMPOSITE MASTER GRADUATED CO-SUPERVISOR 2019 |
|
NUR SYAHIRAH BINTI MUSTAFA NUMERICAL OPTIMIZATION OF TRIPLY PERIODIC MINIMAL SURFACES DESIGN STRUCTURE FOR BONE TISSUE ENGINEERING SCAFFOLD MASTER GRADUATED CO-SUPERVISOR 2023 |
|
MARHAMAH BINTI MOHAMAD MASTER GRADUATED SUPERVISOR 2024 |
|
MIAO LINHAO DESIGN FOR ADDITIVE MANUFACTURING METHOD BASED ON TRIZ-AM INVENTIVE PRINCIPLES AND CONTRADICTION MATRIX MASTER GRADUATED CO-SUPERVISOR 2024 |