GRANT(PI & MEMBERS)
64
PUBLICATIONS
119
INDEXED PUBLICATION
82
TOTAL STUDENTS
H-INDEXED (SCOPUS)
CITATIONS (SCOPUS)
Grant (PI)
INTERNATIONAL GRANTS
1
NATIONAL GRANTS
4
UNIVERSITY FUND
10
TOTAL
Publications
INDEXED PUBLICATION
82
NON-INDEXED PUBLICATION
1
OTHERS PUBLICATION
36
TOTAL
Supervisions
MASTER
15
PHD
16
TOTAL
Legend : SPONSOR TYPE OF GRANT
| Grant Name | Year |
|---|---|
| F4+ 2.2.2 Sustainable Construction Through The Use of Smart Materials in Construction RUG OF UTM Geran Penyelidikan Hi-Tech(F4) |
2024 |
| F4+ 2.2: Design, Construction and Management of Affordable and Sustainable Housing Scheme RUG OF UTM Geran Penyelidikan Hi-Tech(F4) |
2024 |
| F4+ 2.0: Rumah lnSAN - Innovating Sustainable and Affordable Homes in Adapting to Economic Challenges and Climate Change RUG OF UTM Geran Penyelidikan Hi-Tech(F4) |
2024 |
| MG3 - 4.0 : Structural Behaviour of Precast Slab Panel Using Cold Formed Steel Section Integrated with Lightweight Foamed Concrete UNIVERSITAS SRIWIJAYA International Grant |
2023 |
| MG3 - 4.1: Characteristics of Ultra-Lightweight Foamed Concrete Incorporating Nano-Silica RUG OF UTM Matching Grant |
2023 |
| Conceptual Framework for Building Information Modelling Based Energy Efficiency in UTM Building Maintenance Systems RUG OF UTM UTM Encouragement Research |
2023 |
| lnovasi Ternakan Kelulut Lestari Menggunakan Teknologi Simenfero KEMENTERIAN SAINS, TEKNOLOGI DAN INOVASI (MOSTI) Centre for Community and Industry Network |
2022 |
| 4B235: STRUCTURAL BEHAVIOR OF COMPOSITE CONNECTION USED IN PRE-CAST CONCRETE INTEGRATED WITH COLD-FORMED STEEL SECTION USED IN CONSTRUCTION INDUSTRY RUG OF UTM Matching Grant |
2022 |
| Towards Sustainable Concrete Composites through Waste Valorisation of Plastic Food Tray as Low-Cost Fibrous Materials POST DOCTORAL FELLOWSHIP (SPECIAL) Professional Development Research University |
2021 |
| Conceptual Design of Infrastructure and Building Construction System for IUIU Campus towards Local Needs ISLAMIC UNIVERSITY IN UGANDA Business Entity |
2020 |
| AUTOMATED PRODUCTION AND ENHANCEMENT OF INTERLOCKING HOLLOW BLOCK SYSTEM BASED ON IBS REQUIREMENT WITH LOCAL ADDITIVE MATERIALS CREAM Non Goverment Agency |
2020 |
| 4B578 : AUTOMATED PRODUCTION AND ENHANCEMENT OF INTERLOCKING HOLLOW BLOCK SYSTEM BASED ON IBS REQUIREMENT WITH LOCAL ADDITIVE MATERIALS RUG OF UTM Matching Grant |
2020 |
| An innovative pre-fabricated wall paneling for load bearing construction to enhance Industrialized Building Construction. RUG OF UTM UTM High Impact Research |
2020 |
| POTENTIAL USE OF FLY ASH AND BOTTOM ASH FOR GREEN STRUCTURAL LIGHTWEIGHT CONCRETE UNIVERSITAS SRIWIJAYA International Grant |
2019 |
| STUDY ON THE USE OF GREEN WASTE FLY ASH AND BOTTOM ASH FOR LIGHTWEIGHT CONCRETE RUG OF UTM Matching Grant |
2019 |
| A Theoretical Model to Enhance Community Acceptance of Migrant Labour Settlement in Malaysia MINISTRY OF EDUCATION Fundamental Research Grant Scheme |
2019 |
| HIR 7.2 : THERMAL PROPERTIES AND BEHAVIOR OF EFFECTIVE MICROORGANISMS (EM) CONCRETE RUG OF UTM High Impact Research Grant |
2018 |
| FLEXURAL BEHAVIOUR OF INNOVATIVE COLD-FORMED ENCASED COMPOSITE BEAM RUG OF UTM Tier 2 |
2018 |
| A STUDY ON THE USE OF NANO MATERIALS AND MICROORGANISM FOR SUSTAINABLE AND MAINTENANCE FREE CONCRETE RUG OF UTM COE Research Grant |
2018 |
| Performance of Rubberized Pozzolanic Concrete Filled Hollow Steel Column Subjected to Cyclic Loadings RUG OF UTM Tier 1 |
2018 |
| Innovative Low Cost Housing for Indigenous People's Village using Interlocking Brick System JABATAN KEMAJUAN ORANG ASLI Networking Grant |
2017 |
| Development of Lightweight Foam Concrete for Structural Application RUG OF UTM Tier 1 |
2017 |
| AN INNOVATIVE CONSTRUCTION AND PRODUCTION METHOD OF INTERLOCKING BRICK SYSTEM FOR GREEN BUILDING CONSTRUCTION MINISTRY OF EDUCATION Translational Research Grant |
2017 |
| Heutagogy Framework for Structural Steel Design in Civil Engineering Curriculum RUG OF UTM Tier 1 |
2017 |
| MAXIMIZING BUILDING INFORMATION MODELING (BIM) FUNCTIONS IN INTEGRATED PROJECT DELIVERY SYSTEM RUG OF UTM Tier 1 |
2016 |
| SUSTAINABLE CONCRETE PERFORMANCE EVALUATION FOR CLIMATE CHANGE EFFECT IN ASIA REGION RUG OF UTM Matching Grant |
2016 |
| PREDICTION MODEL ON HYDRATION TEMPERATURE OF PALM OIL FUEL ASH CONCRETE USING ADVANCED SOFTWARE RUG OF UTM Matching Grant |
2016 |
| LANDSLIDES ASSESSMENT IN KOREA AND MALAYSIA REGION WITH CLIMATE CHANGE RUG OF UTM Matching Grant |
2016 |
| STRUCTURAL BEHAVIOR OF COMPOSITE BEAM USED IN SELF-COMPACTING CONCRETE INTEGRATED WITH COLD-FORMED STEEL SECTION. RUG OF UTM Matching Grant |
2016 |
| Fire Resistance of Interlocking Brick Column under Normal Working Load RUG OF UTM UTMShine |
2016 |
| INNOVATIVE MODULAR PILE CAP SYSTEM USING COLD-FORMED STEEL SECTION FOR BUILDING FOUNDATION RUG OF UTM Tier 1 |
2016 |
| Real Time Monitoring of Geo-Disaster due to Climate Change YONSEI UNIVERSITY International Grant |
2016 |
| SUSTAINABLE HIGH PERFORMANCE MATERIALS FOR CLIMATE CHANGE YONSEI UNIVERSITY International Grant |
2016 |
| STRUCTURAL BEHAVIOR OF COMPOSITE CONNECTION USED IN PRE-CAST CONCRETE INTEGRATED WITH COLD-FORMED STEEL SECTION USED IN CONSTRUCTION INDUSTRY. UNIVERSITAS SRIWIJAYA International Grant |
2016 |
| SMART LIGHTWEIGHT INNOVATIVE MODULAR PANEL SYSTEM (SLIM) USING COLD-FORMED STEEL SECTION RUG OF UTM Tier 1 |
2015 |
| Microstructure and Hydration Model of POFA Concrete HANYANG UNIVERSITY,REPUBLIC OF KOREA International Grant |
2015 |
| Buckling Resistance Factor for Built-up Cold-Formed Steel Slender Column under Elevated Temperatures MINISTRY OF EDUCATION Fundamental Research Grant Scheme |
2015 |
| DEVELOPMENT OF HIGH STRENGTH HOLLOW INTERLOCKING BRICK SYSTEM (HIBS) USING FLY ASH AND VOLCANIC ASH RUG OF UTM Tier 1 |
2015 |
| Innovative Design and Technology For Sustainable Post Disaster Settlement MINISTRY OF EDUCATION Fundamental Research Grant Scheme |
2015 |
| Innovative Construction Of Floating Light-Weight Affordable House Designed For Flood Resistant MINISTRY OF EDUCATION Fundamental Research Grant Scheme |
2015 |
| Development of Partial Strength Connection for Cruciform Column Section in Low Rise Structures RUG OF UTM Tier 1 |
2014 |
| FAST TRACK CONSTRUCTION OF COMPOSITE FLOOR SYSTEM WITH COLD FORMED STEEL SECTION RUG OF UTM Tier 1 |
2014 |
| Development of New Technologies for Interlocking Brick Block POST DOCTORAL FELLOWSHIP Professional Development Research University |
2014 |
| Formulated Elementary Strength And Stability Equations For Thin-Walled Behaviour Of Cold-Formed Steel Joints In Rapid Building-In-Box System (RaBiB) MINISTRY OF EDUCATION Fundamental Research Grant Scheme |
2013 |
| RNP3-Solid Material Diverter (SOLMAD) JABATAN KERJA RAYA MALAYSIA (JKR) Non Goverment Agency |
2013 |
| RNP2-Hydrokinetic Turbine Anchoring System (HTAS) JABATAN KERJA RAYA MALAYSIA (JKR) Non Goverment Agency |
2013 |
| EXPLORATION OF WOODPECKER'S HEAD MECHANICS FOR DEVELOPMENT OF A NEW STRUCTURAL IMPACT RESISTANCE MINISTRY OF EDUCATION Exploratory Research Grant Scheme |
2013 |
| Development of New Technologies for Interlocking Brick Block Construction RUG OF UTM Tier 1 |
2012 |
| Geometrical effects of bioinspired whale flipper's tubercles on hydro turbine blade performance RUG OF UTM Tier 1 |
2012 |
| Exploring The Interaction of Composite Beam and Slab for Multi-Storey Frame with Interlocking Brick System Produced Locally as Industrialized Building System RUG OF UTM Tier 1 |
2012 |
| Structural Performance on Cold-formed Steel Joint for House-in-a-Box System RUG OF UTM Tier 2 |
2012 |
| ANALYTICAL STUDY OF BLIND BOLTED CONNECTIONS TO STRUCTURAL HOLLOW SECTIONS RUG OF UTM Tier 2 |
2011 |
| Investigation on Precast Floor Panel using Lightweight Concrete and Cold-formed Steel Section. RUG OF UTM Tier 2 |
2011 |
| INNOVATIVE CONSTRUCTION USING COLD-FORMED STEEL SECTIONS FOR LIGHT STEEL STRUCTURES FOR INDUSTRIALISED BUILDING SYSTEM RUG OF UTM Tier 1 |
2011 |
| Analytical Models for Strength of Composite Joints in Light Steel Framing RUG OF UTM Tier 2 |
2011 |
| Investigative Study Of Partial Strength Connection On Both Axes Of Cruciform Column (Ccub) Section MINISTRY OF EDUCATION Fundamental Research Grant Scheme |
2011 |
| Parametric Study if Cruciform Column Sections in Multi-Storey Un-braced Steel Frame Design NEW ACADEMIC STAFF New Academic Staff |
2010 |
Legend : PUBLICATION CATEGORY TYPE OF AUTHORS
| Publication Name | Year |
|---|---|
|
Parametric Study On Rhs Truss Girder Design To Eurocode 3 With Various Truss Spans And Steel Grades
ADVANCES IN CIVIL ENGINEERING MATERIALS Publication In Web Of Science FIRST UTM CORRESPONDING AUTHOR |
2023 |
|
MATERIAL TENSILE TESTS REPORT TENSILE TEST IN ACCORDANCE TO BS EN ISO 6892-1: 2016 Clasified/Technical Report INDIVIDUAL AUTHOR |
2023 |
|
Circular Tunnel Structural Analysis In Soft Ground
ASEAN ENGINEERING JOURNAL Publication In Scopus FIRST UTM CORRESPONDING AUTHOR |
2023 |
|
Potential Use Of Effective Microorganisms As Concrete Self-Curing Agent
THE 8TH PROCEEDING OF CIVIL ENGINEERING Proceedings CO-AUTHOR |
2023 |
|
Compression Resistance Of Short Cold-Formed Lipped C Channel Section With Web Stiffening
ADVANCES IN CIVIL ENGINEERING MATERIALS Publication In Web Of Science FIRST UTM CORRESPONDING AUTHOR |
2023 |
|
Economical Aspect Of Truss Design Through Geometry Configuration
JOURNAL OF ADVANCED RESEARCH IN APPLIED SCIENCES AND ENGINEERING TECHNOLOGY Publication In Scopus UTM FIRST AUTHOR |
2023 |
|
FINITE ELEMENT ANALYSIS OF DOUBLE SPAN SHUTTLE RAIL IT FOR STRENGTH AND DEFLECTION CHECK IN ACCORDANCE WITH AS 4084, PN434890, SINO AND JB/T 14173-2021, REVISED FOR ADDITIONAL BOLT Clasified/Technical Report FIRST UTM CORRESPONDING AUTHOR |
2023 |
|
BEAM END CONNECTOR BENDING TESTS REPORT BENDING TEST IN ACCORDANCE TO AS 4084 CL. 7.5.1 Clasified/Technical Report INDIVIDUAL AUTHOR |
2023 |
|
STRUCTURAL ASSESSMENT AND FORENSIC INVESTIGATION: REPORT NO: FEC/2022/1 Clasified/Technical Report CO-AUTHOR |
2022 |
|
Effect Of Different Curing Conditions On Concrete Properties
7TH PROCEEDING OF CIVIL ENGINEERING Proceedings CO-AUTHOR |
2022 |
|
STRUCTURAL STEEL DESIGN WITH EUROCODE 3: WORK EXAMPLES FOR OPEN SECTION Original Book CO-AUTHOR |
2022 |
|
Experimental Study On Compressive Strength Of Interlocking Hollow Block System (Ihbs) Using Fly Ash
ES WEB OF CONFERENCES Publication In Scopus UTM FIRST AUTHOR |
2022 |
|
Durability Enhancement Of Sustainable Concrete Composites Comprising Waste Metalized Film Food Packaging Fibers And Palm Oil Fuel Ash
SUSTAINABILITY Publication In Web Of Science UTM FIRST AUTHOR |
2022 |
|
Synergistic Effects Of Modified Sheep Wool Fibers On Impact Resistance And Strength Properties Of Concrete Composites
CONSTRUCTION AND BUILDING MATERIALS Publication In Web Of Science UTM FIRST AUTHOR |
2022 |
|
Effects Of Sulfate And Sulfuric Acid On Efficiency Of Geopolymers As Concrete Repair Materials
GELS Publication In Web Of Science UTM FIRST AUTHOR |
2022 |
|
Enhanced Acoustic Properties Of A Novel Prepacked Aggregates Concrete Reinforced With Waste Polypropylene Fibers
MATERIALS Publication In Web Of Science UTM FIRST AUTHOR |
2022 |
|
Hydroelastic Responses Of Plates With Sinusoidal Tubercles Under Perpendicularly Loaded Flow
OCEAN ENGINEERING Publication In Web Of Science UTM FIRST AUTHOR |
2021 |
|
A Review On Utilization Of Different Concretes As In-Filled Steel Hollow Column Subjected To Fire Loading
JOURNAL OF STRUCTURE FIRE ENGINEERING Publication In Web Of Science CO-AUTHOR |
2021 |
|
Performance Evaluation Of Sustainable Concrete Comprising Waste Polypropylene Food Tray Fibers And Palm Oil Fuel Ash Exposed To Sulfate And Acid Attacks
CRYSTALS Publication In Web Of Science UTM FIRST AUTHOR |
2021 |
|
Bending Experiment On A Novel Configuration Of Composite System
Using Rebar As Shear Connectors With Partially Encased Cold-Formed Steel
Built-Up Beams
MATERIAL TODAY : PROCEEDINGS Publication In Web Of Science CO-AUTHOR |
2021 |
|
Synergistic Effects Of Waste Plastic Food Tray As Low-Cost Fibrous Materials And Palm Oil Fuel Ash On Transport Properties And Drying Shrinkage Of Concrete
JOURNAL OF BUILDING ENGINEERING Publication In Web Of Science UTM FIRST AUTHOR |
2021 |
|
Flow Responses Alteration By Geometrical
Effects Of Tubercles On Plates Under The
Maximal Angle Of Attack
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE Publication In Web Of Science UTM FIRST AUTHOR |
2021 |
|
STEEL STRAPS CONFINED LIGHTWEIGHT FOAMED CONCRETE Original Book CO-AUTHOR |
2021 |
|
STRUCTURAL ASSESSMENT AND FORENSIC INVESTIGATION (REPORT NO: FEC/2020/6) Clasified/Technical Report CO-AUTHOR |
2021 |
|
Behaviour Of Composite Beam Arranged As Boxed-Section With C-Channel Of Cold-Formed Steel Of Lipped Section
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING Publication In Scopus CO-AUTHOR |
2020 |
|
Behavior Of Partial Strength Of Beam-To-Column Connection With Gusset Plate For Cold-Formed Steel Sections
ASEAN ENGINEERING JOURNAL Publication In Scopus CO-AUTHOR |
2020 |
|
Experimental Study On Composite Connection With Double Lipped C- Sections
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING Publication In Scopus CO-AUTHOR |
2020 |
|
Design Efficiency, Characteristics, And Utilization Of
Reinforced Foamed Concrete: A Review
CRYSTALS Publication In Scopus UTM FIRST AUTHOR |
2020 |
|
Flexural Performance Of Cold-Formed Steel Section In A Composite Beam System
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING Publication In Scopus CORRESPONDING AUTHOR |
2020 |
|
Experimental Study Of Slip In Haunched Gusset Plate For Cold Formed Steel Connections
INTERNATIONAL JOURNAL OF SCIENTIFIC AND TECHNOLOGY RESEARCH Publication In Scopus CO-AUTHOR |
2020 |
|
Can Cold-Formed Steel Section Be Use As A Sustainable Structural Member In Building And Civil Engineering Constructions? A Mini Review
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING Publication In Scopus UTM FIRST AUTHOR |
2020 |
|
Analytical And Experimental Investigation On Slip-In Gusset Plate Connection For Double C-Channel Sections Of Cold-Formed Steel
OPEN CIVIL ENGINEERING JOURNAL Publication In Scopus CO-AUTHOR |
2020 |
|
Influence Of Seat Angles On The Behaviour Of Cold-Formed Steel Concrete Composite Joints
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH Publication In Web Of Science CO-AUTHOR |
2020 |
|
Behaviour Of Rectangular Gusset Plate With Angle Cleat Connections For Cold-Formed Steel Section
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING Publication In Scopus CO-AUTHOR |
2020 |
|
Hardened Properties Of Concrete With Different Proportion Of Crumb Rubber And Fly Ash
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING Publication In Scopus CO-AUTHOR |
2020 |
|
Flexural Behaviour Of Interlocking Brick System With Grout Cement Mixed With Various Fibre
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING Publication In Scopus CO-AUTHOR |
2020 |
|
Behaviour Of Lightweight Foamed Concrete With Pre-Tensioning Steel Straps Confinement
12TH INTERNATIONAL CIVIL ENGINEERING POST GRADUATE CONFERENCE (SEPKA) / 3RD INTERNATIONAL SYMPOSIUM ON EXPERTISE OF ENGINEERING DESIGN (ISEED), 2018 Publication In Web Of Science CO-AUTHOR |
2019 |
|
Push-Out Tests On Three Innovative Shear Connectors For Composite Cold-Formed Steel Concrete Beams
CONSTRUCTION AND BUILDING MATERIAL Publication In Web Of Science CO-AUTHOR |
2019 |
|
Application Of Waste Tire Rubber Aggregate In Porous Concrete
SMART STRUCTURES AND SYSTEMS Publication In Web Of Science UTM FIRST AUTHOR |
2019 |
|
Structural Behaviour Of Cold-Formed Steel Of Double C-Lipped Channel Sections Integrated With Concrete Slabs As Composite Beams
LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES Publication In Web Of Science CO-AUTHOR |
2019 |
|
Application Of Extreme Learning Machine (Elm) And
Genetic Programming (Gp) To Design Steel-Concrete
Composite Floor Systems At Elevated Temperatures
STEEL AND COMPOSITE STRUCTURES Publication In Web Of Science UTM FIRST AUTHOR |
2019 |
|
The Effect Of Wollastonite Powder With Pozzolan Micro Silica In
Conventional Concrete Containing Recycled Aggregate
SMART STRUCTURES AND SYSTEMS Publication In Web Of Science UTM FIRST AUTHOR |
2019 |
|
Experimental Investigation On The Effect Of Cementitious Materials On Fresh And Mechanical Properties Of Self-Consolidating Concrete
ADVANCES IN CONCRETE CONSTRUCTION, Publication In Web Of Science UTM FIRST AUTHOR |
2019 |
|
A Review On Concrete-Filled Steel Hollow Column Subjected To Fire And Cyclic Loadings
IOP CONFERENCE SERIES: EARTH AND ENVIRONMENTAL SCIENCE Publication In Scopus CO-AUTHOR |
2019 |
|
Experimental Study On Flexural Behaviour Of Partially Encased Cold-Formed Steel Composite Beams Using Rebar As Shear Connector
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING Publication In Scopus CO-AUTHOR |
2019 |
|
Image-Based Non-Destructive Evaluation Method For Building Condition Assessment
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING Publication In Scopus CO-AUTHOR |
2019 |
|
Experimental And Analytical Study On Composite Connection With Cold-Formed Steel Of Double Channel Sections
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING Publication In Scopus CO-AUTHOR |
2019 |
|
Utilization Of Rubberized Concrete Columns To Enhance Damping Ratio Subjected To Seismic Loading
REGIONAL CONFERENCE IN CIVIL ENGINEERING (RCCE) 2018 Conference Paper CO-AUTHOR |
2018 |
|
A Review On Concrete Filled Steel Hollow Column Subjected To Fire Loading
INTERNATIONAL GRADUATE CONFERENCES ON ENGINEERING, SCIENCE AND HUMANITIES Conference Paper CO-AUTHOR |
2018 |
|
Experimental Study On Flexural Behavior Of Partially Encased Cold-Formed Steel Composite Beams Using Rebar As Shear Connector
10TH ASIA PACIFIC STRUCTURAL ENGINEERING AND CONSTRUCTION CONFERENCE (APSEC 2018) Conference Paper CO-AUTHOR |
2018 |
|
Temperature Analysis Of Steel Hollow Column Exposed To Standard Fire
JOURNAL OF STRUCTURAL TECHNOLOGY Journal Article Non Citation-Indexed CO-AUTHOR |
2018 |
|
Three-Dimensional Numerical And Linearly Distributed Multi-Parameter Fitted Analytical Modeling Of Hybrid Beam-Column With Partially Welded Flush End-Plate Connection
ADVANCES IN STRUCTURAL ENGINEERING Publication In Web Of Science CO-AUTHOR |
2018 |
|
Experimental Investigation On Temperature Distribution Of Foamed Concrete Field Steel Tube Column Under Standard Fire
IOP CONFERENCE SERIES : EARTH AND ENVIRONMENT SCIENCE Publication In Scopus CO-AUTHOR |
2018 |
|
I-Beam To Square Hollow Column Blind Bolted Moment Connection: Experimental And Numerical Study
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH Publication In Web Of Science CO-AUTHOR |
2018 |
|
Conceptual Design Using Industrialized Building System For Affordable Housing Construction In Indonesia
ADVANCED SCIENCE LETTERS Publication In Web Of Science CO-AUTHOR |
2018 |
|
Review On Column Fire Resistance Design For Concrete Filled Steel Tube
JURNAL TEKOLOGI (SCIENCE AND ENGINEERING) Publication In Web Of Science CO-AUTHOR |
2018 |
|
Experimental Investigation On Lightweight Composite Slab For Floating Structures
IMPROVING FLOOD MANAGEMENT, PREDICTION AND MONITORING: CASE STUDIES IN ASIA Book Chapter UTM FIRST AUTHOR |
2018 |
|
Comparative Study Between Linear-Interpolation And Stress-Block Methods Of Composite Design Using Cold-Formed Steel Section
INTERNATIONAL JOURNAL OF ENGINEERING AND TECHNOLOGY(UAE) Publication In Scopus CORRESPONDING AUTHOR |
2018 |
|
Economic Aspects Of Cold Formed Steel Section Designed As Composite Beam
ADVANCED SCIENCE LETTERS Publication In Web Of Science CO-AUTHOR |
2018 |
|
Thermal Comfort Study On Residential House Of A Township In Johor Bahru
GLOBAL CONGRESS ON CONSTRUCTION, MATERIAL AND STRUCTURAL ENGINEERING 2017 (GCOMSE2017) Conference Paper CO-AUTHOR |
2017 |
|
Thermal Characteristics Of A Residential House In A New Township In Johor Bahru
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING Proceedings CO-AUTHOR |
2017 |
|
Experimental Investigation Of Long Interlocking Brick Column Subjected To Eccentric Load
2ND PROCEEDING OF CIVIL ENGINEERING: VOLUME 1 - STRUCTURE AND MATERIALS Proceedings CORRESPONDING AUTHOR |
2017 |
|
Economic Aspects Of Interlocking Hollow Brick System Designed For Industrialized Building System
AIP CONFERENCE PROCEEDINGS Publication In Scopus CO-AUTHOR |
2017 |
|
Section Properties Calculation By Matlab Software Of Lipped C Section
2ND PROCEEDING OF CIVIL ENGINEERING: VOLUME 1 - STRUCTURE AND MATERIALS Proceedings CORRESPONDING AUTHOR |
2017 |
|
Structural Behavior Of Prefabricated Pad Footing System Designed Using Cold-Formed Steel Lipped Channel Section
2ND PROCEEDING OF CIVIL ENGINEERING: VOLUME 1 - STRUCTURE AND MATERIALS Proceedings UTM FIRST AUTHOR |
2017 |
|
Structural Performance Of Reinforced Interlocking Blocks Column
CONSTRUCTION AND BUILDING MATERIALS Publication In Web Of Science CO-AUTHOR |
2017 |
|
Structural Behavior Of Light Weigh Steel Frame Under Combined Gravity And Lateral Loadings
2ND PROCEEDING OF CIVIL ENGINEERING: VOLUME 1 - STRUCTURE AND MATERIALS Proceedings CORRESPONDING AUTHOR |
2017 |
|
Structural Behaviour Of End-Plate Connections To Cruciform Column Section Under Monotonic Loading
STRUCTURAL BEHAVIOUR OF INNOVATIVE CONSTRUCTIONAL STEEL Book Chapter UTM FIRST AUTHOR |
2016 |
|
Economic Aspects Of Cruciform Column Used In The Design Of Unbraced Multi-Storey Steel Frame
ADVANCES IN CONSTRUCTION ENGINEERING, MANAGEMENT, AND PLANNING Book Chapter CORRESPONDING AUTHOR |
2016 |
|
Temperature Rise Of Cold-Formed Steel Built-Up Back-To-Back Column Under Standard Fire
JURNAL TEKNOLOGI Publication In Scopus CO-AUTHOR |
2016 |
|
Temperature Development Of Cold Formed Steel Column Channel Section Under Standard Fire
INTERNATIONAL CONFERENCE ON ADVANCED SCIENCE, ENGINEERING AND TECHNOLOGY (ICASET) Publication In Scopus CO-AUTHOR |
2016 |
|
Experimental Investigation On End-Plate Connection With Built-Up Beam Section
STRUCTURAL BEHAVIOUR OF INNOVATIVE CONSTRUCTIONAL STEEL Book Chapter UTM FIRST AUTHOR |
2016 |
|
Force And Deformation Behaviour Of Roof Truss System With Cold-Formed Steel Channel Section
9TH ASIA PACIFIC STRUCTURAL ENGINEERING AND CONSTRUCTION CONFERENCE & 8TH ASEAN CIVIL ENGINEERING CONFERENCE Conference Paper CO-AUTHOR |
2015 |
|
Capacity Of Interlocking Stub Column With Cement Mortar Infill Under Axial Compression Load
9TH ASIA PACIFIC STRUCTURAL ENGINEERING AND CONSTRUCTION CONFERENCE & 8TH ASEAN CIVIL ENGINEERING CONFERENCE (APSEC-ACEC 2015) Conference Paper CORRESPONDING AUTHOR |
2015 |
|
Compressive Strength Of Ground Waste Seashells In Cement Mortars For Masonry And Plastering
APPLIED MECHANICS AND MATERIALS Proceedings CORRESPONDING AUTHOR |
2015 |
|
Wind-Moment Design Of Semi-Rigid Un-Braced Steel Frames Using Cruciform Column (Ccub) Section
INTERNATIONAL JOURNAL OF STEEL STRUCTURES Publication In Web Of Science CORRESPONDING AUTHOR |
2015 |
|
Standardization Of Composite Connections For Trapezoid Web Profiled Steel Sections
STRUCTURAL ENGINEERING AND MECHANICS Publication In Web Of Science CO-AUTHOR |
2015 |
|
A Preliminary Study Of Occupational Noise Exposure Among Leaf Blower And Grass Cutter Workers In Public University
JURNAL TEKNOLOGI Publication In Scopus CO-AUTHOR |
2015 |
|
A Preliminary Study Of Environmental Noise In Public University
JURNAL TEKNOLOGI Publication In Scopus CO-AUTHOR |
2015 |
|
Parametric Study Of Compound Cold-Formed Steel Sections As Flexural Members
JURNAL TEKNOLOGI Publication In Scopus CORRESPONDING AUTHOR |
2015 |
|
Steel Weight Saving Developed From Semi-Continuous Construction In Multi-Storey Braced Steel Frame Based On Euro-Code 3
JURNAL TEKNOLOGI Publication In Scopus CO-AUTHOR |
2015 |
|
Structural Performance Of Cold-Formed Steel Section In Composite Structures: A Review
JURNAL TEKNOLOGI Publication In Scopus CO-AUTHOR |
2015 |
|
Analytical Study Of End-Plate Connection On Cruciform Column Section
JURNAL TEKNOLOGI Publication In Scopus CORRESPONDING AUTHOR |
2015 |
|
Finite Element Analysis Of Top-Seat Beam-To-Column Connections With Double Channel Cold-Formed Steel Sections
THE 6TH INTERNATIONAL CONFERENCE OF ASIAN CONCRETE FEDERATION Conference Paper UTM FIRST AUTHOR |
2014 |
|
Engineering Properties Of Bio-Inspired Cement Mortar Containing Seashell Powder
NATIONAL SEMINAR ON CIVIL ENGINEERING RESEARCH SEPKA2014 Conference Paper UTM FIRST AUTHOR |
2014 |
|
Monotonic Behaviour Of Beam-To-Column Connections With Double Channel Cold-Formed Steel Sections
NATIONAL SEMINAR ON CIVIL ENGINEERING RESEARCH SEPKA 2014 Conference Paper UTM FIRST AUTHOR |
2014 |
|
Influence Of Angle Thickness Towards Stiffness And Strength Prediction For Cold-Formed Steel Top-Seat Flange Cleat Connection
APPLIED MECHANICS AND MATERIALS Publication In Scopus CO-AUTHOR |
2014 |
|
Review On Cold-Formed Steel Connections
SCIENTIFIC WORLD JOURNAL Publication In Web Of Science CO-AUTHOR |
2014 |
|
Economic Aspect Of Square Hollow Section In The Design Of Multi-Storey Unbraced Steel Frame
MATERIALS RESEARCH INNOVATIONS Publication In Web Of Science CORRESPONDING AUTHOR |
2014 |
|
Uniaxial Compressive Stability Of Laminated
Composite Plate With Localised Interfacial
Degeneration
MATERIALS RESEARCH INNOVATIONS Publication In Web Of Science CO-AUTHOR |
2014 |
|
Parametric Study Of Blind Bolted End-Plate Connection On Structural Square Hollow Section
2014 STRUCTURAL AND CIVIL ENGINEERING WORKSHOP (SCEW 2014) Proceedings CORRESPONDING AUTHOR |
2014 |
|
Analytical Study Of End-Plate Connection On Cruciform Column Section
GEOCON 2013-Persada Johor International Convention Centre, Johor Bahru, Johor, Malaysia Conference Paper UTM FIRST AUTHOR |
2013 |
|
Parametric Study Of Compound Cold-Formed Steel Sections As Flexural Members
GEOCON 2013-PERSADA JOHOR INTERNATIONAL CONVENTION CENTRE, JOHOR BAHRU, JOHOR, MALAYSIA Conference Paper UTM FIRST AUTHOR |
2013 |
|
Numerical Modelling Of Stiffness And Strength Behaviour Of Top-Seat Flange-Cleat Connection For Cold-Formed Double Channel Section
APPLIED MECHANICS AND MATERIALS Publication In Scopus CO-AUTHOR |
2013 |
|
Effective Steel Area Of Fully Embedded Cold-Formed Steel Frame In Composite Slab System Under Pure Bending
APPLIED MECHANICS AND MATERIALS Publication In Scopus CO-AUTHOR |
2013 |
|
Numerical Simulation Of Cold-Formed Steel Top-Seat Flange Cleat Connection
JURNAL TEKNOLOGI (SCIENCES AND ENGINEERING) Publication In Scopus CO-AUTHOR |
2013 |
|
Experimental Investigation Of Retrofitted Extended End-Plate Connections
APPLIED MECHANICS AND MATERIALS Publication In Scopus CORRESPONDING AUTHOR |
2013 |
|
Numerical Modelling Of Top-Seat Flange-Cleat
Connection In Light Steel Framing
8TH ASIA PACIFIC STRUCTURAL ENGINEERING AND CONSTRUCTION CONFERENCE (APSEC) AND 1ST INTERNATIONAL CONFERENCE ON CIVIL ENGINEERING RESEARCH (ICCER) Conference Paper CO-AUTHOR |
2012 |
|
Finite Element Models For Blind-Bolted End-Plate Connection On Structural Hollow Section
8TH ASIA PACIFIC STRUCTURAL ENGINEERING AND CONSTRUCTION CONFERENCE (APSEC 2012) Conference Paper CORRESPONDING AUTHOR |
2012 |
|
Strength And Initial Stiffness Of Extended End-Plate
Connection Based On The Component Model
8TH ASIA PACIFIC STRUCTURAL ENGINEERING AND CONSTRUCTION CONFERENCE (APSEC 2012) Conference Paper CORRESPONDING AUTHOR |
2012 |
|
Flexural Behaviour Of Composite Slab Panel With Cold-Formed Steel Section
8TH ASIA PACIFIC STRUCTURAL ENGINEERING AND CONSTRUCTION CONFERENCE (APSEC) AND 1ST INTERNATIONAL CONFERENCE ON CIVIL ENGINEERING RESEARCH (ICCER) Conference Paper CO-AUTHOR |
2012 |
|
Experimental Investigation On Wide-Span Cold-Formed Steel Roof Truss System
APPLIED MECHANICS AND MATERIALS Publication In Web Of Science CO-AUTHOR |
2012 |
|
Structural Behaviour Of Combined Flange-Cleat And Gusset Plate Connection For Cold-Formed Steel Double Channel Sections
ADVANCED SCIENCE LETTERS Publication In Scopus CO-AUTHOR |
2012 |
|
Experimental Evaluation Of Flush End-Plate Connection With Built-Up Hybrid Beam Section
ADVANCES IN STRUCTURAL ENGINEERING Publication In Web Of Science CO-AUTHOR |
2012 |
|
Experimental Tests On Composite Beam With Various Slab Systems
APPLIED MECHANICS AND MATERIALS Publication In Web Of Science CO-AUTHOR |
2012 |
|
Flexural Performance Of Laminated Composite Plates With Diagonally Perturbed Localized Delamination
ADVANCED SCIENCE LETTERS Publication In Scopus CO-AUTHOR |
2012 |
|
Experimental Investigation On Locally Produced Cold-Formed Steel Sections For Roof Truss System
ADVANCED SCIENCE LETTERS Publication In Scopus CORRESPONDING AUTHOR |
2012 |
|
Optimization Of Cold-Formed Channel Sections Using Imperialist Competitive Algorithm
APPLIED MECHANICS AND MATERIALS Publication In Web Of Science CORRESPONDING AUTHOR |
2012 |
|
Experimental Investigation On Sub-Assemblage Frame With Cruciform Column Section
THE 6TH INTERNATIONAL SYMPOSIUM ON STEEL STRUCTURES (ISSS 2011) Conference Paper CORRESPONDING AUTHOR |
2011 |
|
Experimental Investigation On Slip-In Connection For Cold-Formed Steel Double Channel Sections
ADVANCED MATERIALS RESEARCH Publication In Web Of Science CO-AUTHOR |
2011 |
|
Limiting The Sway On Multi-Storey Un-Braced Steel Frames Bending On Weak Axis With Partial Strength Connections
STRUCTURAL ENGINEERING AND MECHANICS Publication In Web Of Science CO-AUTHOR |
2011 |
|
Finite Element Analysis Of Flush End-Plate Connections Connected To Column Web
INTERNATIONAL JOURNAL OF STEEL STRUCTURES Publication In Web Of Science CO-AUTHOR |
2011 |
|
Experimental Investigation On Bolted Angle Connections For Cold-Formed Steel Sections
ADVANCES IN STEEL AND ALUMINIUM STRUCTURES Publication In Web Of Science CO-AUTHOR |
2011 |
|
Experimental Investigation Of End-Plate Connection With Cruciform Column Section
ADVANCED MATERIALS RESEARCH Publication In Web Of Science CORRESPONDING AUTHOR |
2011 |
|
Maximum Local Thermal Effects Carpet Plot For Symmetric Laminated Composite Plates
ADVANCED MATERIALS RESEARCH Publication In Web Of Science CO-AUTHOR |
2011 |
|
Experimental Investigation Of Flush End-Plate
Connection Connected To Column Web
ADVANCES IN STEEL AND ALUMINIUM STRUCTURES Publication In Web Of Science CO-AUTHOR |
2011 |
|
Experimental Investigation On Full-Scale Sub-Assemblage Frame
ADVANCES IN STEEL AND ALUMINIUM STRUCTURES Publication In Web Of Science UTM FIRST AUTHOR |
2011 |
|
Behaviour Of Composite Beam With Trapezoid Web Profiled Steel Section In Sub-Assemblage Frame
ADVANCED MATERIALS RESEARCH Publication In Web Of Science CO-AUTHOR |
2011 |
|
Push-Off Tests On Pin-Connected Shear Studs With Composite Steel-Concrete Beams
CONSTRUCTION AND BUILDING MATERIALS Publication In Web Of Science CO-AUTHOR |
2009 |
Legend : IP CATEGORY IP LEVEL
Legend : SESSION LEVEL OF STUDY STATUS SUPERVISION LEVEL
| Supervision List |
|---|
|
LEE YEONG HUEI PERFORMANCE OF LIGHT STEEL FRAMING WITH BOLTED TOP-SEAT FLANGE CLEAT CONNECTION PHD GRADUATED CO-SUPERVISOR 2014 |
|
LEE YEE LING STRUCTURAL BEHAVIOUR OF SLAB PANEL SYSTEM WITH EMBEDDED COLD-FORMED STEEL SKELETAL FRAME PHD GRADUATED CO-SUPERVISOR 2016 |
|
BISHIR KADO BEHAVIOUR OF FOAMED CONCRETE-FILLED STEEL HOLLOW COLUMN UNDER FIRE PHD GRADUATED CO-SUPERVISOR 2018 |
|
TAN BOON CHEIK STRUCTURAL BEHAVIOUR OF END-PLATE CONNECTIONS ON HYBRID BEAM TO CRUCIFORM COLUMN SECTION PHD GRADUATED SUPERVISOR 2019 |
|
MU KER SHIN GEOMETRICAL EFFECTS OF BIO-INSPIRED HUMPBACK WHALE FLIPPER TUBERCLES ON HYDRO TURBIN BLADE PERFORMANCE PHD GRADUATED SUPERVISOR 2019 |
|
NURIZATY BINTI ZUHAN POST FIRE PERFORMANCE OF PARTIALLY DAMAGED CONCRETE WITH FLY ASH FILLED HOLLOW STEEL COLUMN PHD GRADUATED CO-SUPERVISOR 2021 |
|
EDRIZAL PHD GRADUATED SUPERVISOR 2021 |
|
TAN HEAN SEONG OPTIMAL WEIGHT AND COST-EFFECTIVE TRUSS SYSTEM DESIGN FRAMEWORK PHD GRADUATED CO-SUPERVISOR 2023 |
|
RAHMAT BIN ALI FIARDI RANGKA KERJA UNTUK MENGEKANG PELEPASAN KARBON KE ATAS JALAN BERTOL DI INDONESIA PHD GRADUATED SUPERVISOR 2023 |
|
CHAI TECK JUNG PREFABRICATED HALF SCISSOR-LIKE-ELEMENTS MECHANISM FOR A DEPLOYABLE STEEL STRUCTURE PHD GRADUATED CO-SUPERVISOR 2024 |
|
LING TIEN HENG OPTIMUM DESIGN FOR AFFORDABLE HOUSE IN ISKANDAR MALAYSIA PHD ON GOING SUPERVISOR |
|
WU, SHANSHAN REAL-TIME SYNCHRONIZATION OF BUILDING INFORMATION MODELLING (BIM) AND WINDOWS FORMS APPLICATIONS (WFA) PHD ON GOING CO-SUPERVISOR |
|
ZELMI SRIYOLJA  KERANGKA KERJA KONSULTAN PERANCANGAN PEMBINAAN UNTUK IMPLEMENTASI BUILDING INFORMATION MODELLING DI INDONESIA    PHD ON GOING SUPERVISOR |
|
KAMALIAH BINTI MOHD SAHA PHD ON GOING SUPERVISOR |
|
AHMED EMHEMED HADI SALEM STRACTURAL BEHAVIOUR OF INTERLOCKING BLOCKS ,COLUMN , BEAMS AND WALLS PHD ON GOING SUPERVISOR |
|
EFNI USLINDA ECONOMIC ASPECTS OF LOW COST HOUSING CONSTRUCTION USING INDUSTRIALIZED BUILDING SYSTEM IN WEST SUMATRA, INDONESIA PHD ON GOING SUPERVISOR |
|
SASAN PARNIANI MASTER GRADUATED SUPERVISOR 2010 |
|
JOMA HAMED MOHAMED OMER ANALYTICAL AND NUMERICAL MODELING OF FLUSH END-PLATE CONNECTION SYSTEM WITH BUILT-UP HYBRID BEAM MASTER GRADUATED CO-SUPERVISOR 2013 |
|
LAU HUI HIE MASTER GRADUATED SUPERVISOR 2013 |
|
SEAH IVY MASTER GRADUATED SUPERVISOR 2014 |
|
NURUL AIN NABILAH BINTI MAMAT MASTER GRADUATED SUPERVISOR 2014 |
|
TEE CHIN WEE BEHAVIOUR OF AN INNOVATIVE CONNECTION USED IN STEEL STORAGE RACKING SYSTEMS MASTER GRADUATED CO-SUPERVISOR 2015 |
|
GAN HONG WEI ECONOMIC AND STRUCTURAL PERFORMANCE OF CRUCIFORM COLUMN SECTION WITH END-PLATE CONNECTION. MASTER GRADUATED SUPERVISOR 2015 |
|
LOW JUN XIU MASTER GRADUATED SUPERVISOR 2016 |
|
LAW CHIN YONG MASTER GRADUATED SUPERVISOR 2016 |
|
JIBEH BIN GONOLON HYDRO-RESPONSE OF GRID-LIKE FLOATING STRUCTURE SUBJECTED TO A MONO-DIRECTIONAL FLOW MASTER GRADUATED CO-SUPERVISOR 2017 |
|
TENGKU FIRDAUS BIN TUAN LAH PERFORMANCE OF SOLID MATERIAL DIVERTER SUBJECT TO IMPACT COLLISION WITH RESPECT TO ANGLE VARIATION MASTER GRADUATED SUPERVISOR 2017 |
|
FAISAL AMSYAR BIN REDZUAN MECHANICAL PERFORMANCE OF COMPOSITE COLD-FORMED STEEL BEAM-TO-COLUMN JOINTS WITH LIGHTWEIGHT CONCRETE MASTER GRADUATED CO-SUPERVISOR 2017 |
|
GARY OON ZI HAO MASTER GRADUATED SUPERVISOR 2023 |
|
LEE ZE YANG STRUCTURAL MODELLING FRAMEWORK FOR CIRCULAR TUNNELS IN SOFT SOIL CONDITIONS MASTER GRADUATED SUPERVISOR 2023 |
|
MUHAMMAD ADAM BIN MAHMOOD STRUCTURAL BEHAVIOUR OF SIMPLY SUPPORTED REINFORCED CONCRETE BEAM WITH PERMANENT PRE-CAST FORMWORK PANELLING MASTER ON GOING SUPERVISOR |