GRANT(PI & MEMBERS)
94
PUBLICATIONS
269
INDEXED PUBLICATION
202
TOTAL STUDENTS
H-INDEXED (SCOPUS)
CITATIONS (SCOPUS)
Grant (PI)
INDUSTRY GRANTS
1
INTERNATIONAL GRANTS
2
NATIONAL GRANTS
10
UNIVERSITY FUND
11
TOTAL
Publications
INDEXED PUBLICATION
202
NON-INDEXED PUBLICATION
16
OTHERS PUBLICATION
51
TOTAL
Supervisions
MASTER
18
PHD
26
TOTAL
Legend : SPONSOR TYPE OF GRANT
Grant Name | Year |
---|---|
PERFORMANCE EVALUATION OF NOVEL PREPACKED AGGREGATE CONCRETE REINFORCED WITH WASTE POLYPROPYLENE FIBRES RUG OF UTM Professional Development Research University |
2020 |
Conceptual Design of Infrastructure and Building Construction System for IUIU Campus towards Local Needs ISLAMIC UNIVERSITY IN UGANDA Business Entity |
2020 |
AUTOMATED PRODUCTION AND ENHANCEMENT OF INTERLOCKING HOLLOW BLOCK SYSTEM BASED ON IBS REQUIREMENT WITH LOCAL ADDITIVE MATERIALS CREAM Non Goverment Agency |
2020 |
4B578 : AUTOMATED PRODUCTION AND ENHANCEMENT OF INTERLOCKING HOLLOW BLOCK SYSTEM BASED ON IBS REQUIREMENT WITH LOCAL ADDITIVE MATERIALS RUG OF UTM Matching Grant |
2020 |
Theoretical Components in Resistance and Stiffness Evaluation of Cold-formed Steel LightweightConcrete Composite Connections RUG OF UTM UTM Fundamental Research |
2020 |
Distributed Rainfall-Runoff Modeling through Integration using Empirical Models for the Simulation of Floods RUG OF UTM Matching Grant |
2020 |
Martian meta concrete for in situ construction of permanent settlement on Mars RUG OF UTM UTM High Impact Research |
2020 |
POTENTIAL USE OF FLY ASH AND BOTTOM ASH FOR GREEN STRUCTURAL LIGHTWEIGHT CONCRETE UNIVERSITAS SRIWIJAYA International Grant |
2019 |
Coal ash utilization for environmental friendly road material RUG OF UTM Matching Grant |
2019 |
SUSTAINABLE UTILISATION OF COAL ASH FOR QUALITY PAVEMENT MATERIAL UNIVERSITAS SRIWIJAYA International Grant |
2019 |
REINFORCEMENT OF CEMENTITIOUS MATRIX BY CELLULOSIC AEROGEL - CARBON BASED NANOCOMPOSITE RUG OF UTM Matching Grant |
2019 |
CELLULOSIC AEROGEL-CARBON BASED NANOCOMPOSITES FOR REINFORCEMENT OF CEMENTITIOUS MATRIX UNIVERSITAS SRIWIJAYA International Grant |
2019 |
FLOOD ANALYSIS, RISK, AND CONTROL:APPROACHES TOWARD SUSTAINABILITY UNIVERSITAS SRIWIJAYA International Grant |
2019 |
STUDY ON THE USE OF GREEN WASTE FLY ASH AND BOTTOM ASH FOR LIGHTWEIGHT CONCRETE RUG OF UTM Matching Grant |
2019 |
PROJEK POTENSI PEMBANGUNAN SOSIO-EKONOMI MASYARAKAT LUAR BANDAR DENGAN MEWUJUDKAN INCUBATOR BENGKEL PENGELUARAN YANG MENGHASILKAN PRODUK MAKANAN HALAL. MINISTRY OF EDUCATION Business Entity |
2019 |
HIR 7.2 : THERMAL PROPERTIES AND BEHAVIOR OF EFFECTIVE MICROORGANISMS (EM) CONCRETE RUG OF UTM High Impact Research Grant |
2018 |
HIR 7.4 : BIO-MEDIATED SOIL IMPROVEMENT IN THE MITIGATION OF LIQUEFIABLE SANDY SOIL RUG OF UTM High Impact Research Grant |
2018 |
FLEXURAL BEHAVIOUR OF INNOVATIVE COLD-FORMED ENCASED COMPOSITE BEAM RUG OF UTM Tier 2 |
2018 |
A STUDY ON THE USE OF NANO MATERIALS AND MICROORGANISM FOR SUSTAINABLE AND MAINTENANCE FREE CONCRETE RUG OF UTM COE Research Grant |
2018 |
Performance Evaluation of Green Concrete Composites Incorporating Waste Carpet Fibres and Palm Oil Fuel Ash Exposed to Tropical Environments RUG OF UTM Professional Development Research University |
2018 |
Carbon Footprint Calculator for Malaysian Green Highway Index LEMBAGA LEBUHRAYA MALAYSIA Non Goverment Agency |
2017 |
CARBON FOOTPRINT CALCULATOR FOR MALAYSIAN GREEN HIGHWAY INDEX (SUSTAINABLE DEVELOPMENT AND CONSTRUCTION ACTIVITIES) LEMBAGA LEBUHRAYA MALAYSIA Non Goverment Agency |
2017 |
Carbon Footprint Calculator for Malaysian Green Highway Index (Material) LEMBAGA LEBUHRAYA MALAYSIA Non Goverment Agency |
2017 |
Carbon Footprint Calculator for Malaysian Green Highway Index (Construction and Green Highway Initiatives) LEMBAGA LEBUHRAYA MALAYSIA Non Goverment Agency |
2017 |
AN INNOVATIVE CONSTRUCTION AND PRODUCTION METHOD OF INTERLOCKING BRICK SYSTEM FOR GREEN BUILDING CONSTRUCTION MINISTRY OF EDUCATION Translational Research Grant |
2017 |
Development of Lightweight Foam Concrete for Structural Application RUG OF UTM Tier 1 |
2017 |
DEVELOPMENT OF TANJUNG PELEPAS ECOLOGICAL PARK (TPEP) AT PHASE 3, FREE ZONE AREA PORT OF TANJUNG PELEPAS FOR JOHOR PORT AUTHORITY LEMBAGA PELABUHAN JOHOR Business Entity |
2017 |
STRUCTURAL BEHAVIOR OF COMPOSITE BEAM USED IN SELF-COMPACTING CONCRETE INTEGRATED WITH COLD-FORMED STEEL SECTION. RUG OF UTM Matching Grant |
2016 |
SUSTAINABLE CONCRETE PERFORMANCE EVALUATION FOR CLIMATE CHANGE EFFECT IN ASIA REGION RUG OF UTM Matching Grant |
2016 |
PREDICTION MODEL ON HYDRATION TEMPERATURE OF PALM OIL FUEL ASH CONCRETE USING ADVANCED SOFTWARE RUG OF UTM Matching Grant |
2016 |
LANDSLIDES ASSESSMENT IN KOREA AND MALAYSIA REGION WITH CLIMATE CHANGE RUG OF UTM Matching Grant |
2016 |
INNOVATIVE MODULAR PILE CAP SYSTEM USING COLD-FORMED STEEL SECTION FOR BUILDING FOUNDATION RUG OF UTM Tier 1 |
2016 |
Real Time Monitoring of Geo-Disaster due to Climate Change YONSEI UNIVERSITY International Grant |
2016 |
SUSTAINABLE HIGH PERFORMANCE MATERIALS FOR CLIMATE CHANGE YONSEI UNIVERSITY International Grant |
2016 |
Fundamental Study on Shape Optimization for Interlocking Mortarless Concrete Block: Finite Element simulation RUG OF UTM Potential Academic Staff |
2016 |
SHORT TERM PERFORMANCE OF WATERPROOF CONCRETE ADMIXTURE USING CRYSTALLINE NANO MATERIAL RUG OF UTM Tier 1 |
2016 |
SMART LIGHTWEIGHT INNOVATIVE MODULAR PANEL SYSTEM (SLIM) USING COLD-FORMED STEEL SECTION RUG OF UTM Tier 1 |
2015 |
Microstructure and Hydration Model of POFA Concrete HANYANG UNIVERSITY,REPUBLIC OF KOREA International Grant |
2015 |
SUSTAINABLE FLOOD RESISTANT HOUSING DEVELOPMENT IN MALAYSIA: TOWARDSDEVELOPMENT OF BUILDING ASSESSMENT TOOL MINISTRY OF EDUCATION Fundamental Research Grant Scheme |
2015 |
Buckling Resistance Factor for Built-up Cold-Formed Steel Slender Column under Elevated Temperatures MINISTRY OF EDUCATION Fundamental Research Grant Scheme |
2015 |
THE EFFECT OF BUCKLING RESTRAINED BRACED SYSTEMS ON OVERALL RESISTANCE OF A SEISMICALLY DAMAGED BUILDING UNDER POST-EVENT FIRE RUG OF UTM Professional Development Research University |
2015 |
DEVELOPMENT OF HIGH STRENGTH HOLLOW INTERLOCKING BRICK SYSTEM (HIBS) USING FLY ASH AND VOLCANIC ASH RUG OF UTM Tier 1 |
2015 |
MODULAR CONSTRUCTION OF PREFAB BUILDING WITH ISO SHIPPING CONTAINER RUG OF UTM Tier 1 |
2015 |
Innovative Construction Of Floating Light-Weight Affordable House Designed For Flood Resistant MINISTRY OF EDUCATION Fundamental Research Grant Scheme |
2015 |
Innovative Design and Technology For Sustainable Post Disaster Settlement MINISTRY OF EDUCATION Fundamental Research Grant Scheme |
2015 |
ASSESSMENT MODEL FOR TECHNOLOGICAL LABELING OF SUSTAINABLE AFFORDABLE HOUSING RUG OF UTM Flagship |
2015 |
Fundamental Stability Formulation for Shipping Container as Core Dwelling MINISTRY OF EDUCATION Fundamental Research Grant Scheme |
2014 |
THE FEASIBILITY STUDY ON MOOC SYSTEM FOR CIVIL ENGINEERING CURRICULUM RUG OF UTM Flagship |
2014 |
IMPLEMENTATION OF MOOCS IN CIVIL ENGINEERING CURRICULUM RUG OF UTM Flagship |
2014 |
EFFECTIVENESS OF TEACHING HIGHWAY ENGINEERING USING MOOCS RUG OF UTM Flagship |
2014 |
CIVIL ENGINEERING STUDENTS NEEDS AND EXPECTATION ON ONLINE LEARNING RUG OF UTM Flagship |
2014 |
MOOCs implementation in civil engineering curriculum RUG OF UTM Flagship |
2014 |
Performance of Treated Rubberized Fiber Concrete Under Earthquake and Fire Loadings MINISTRY OF EDUCATION Fundamental Research Grant Scheme |
2014 |
Synthesis and Characterization of eco friendly green nano particles for corrosion inhibition of metals MINISTRY OF EDUCATION Fundamental Research Grant Scheme |
2014 |
FAST TRACK CONSTRUCTION OF COMPOSITE FLOOR SYSTEM WITH COLD FORMED STEEL SECTION RUG OF UTM Tier 1 |
2014 |
Development of Partial Strength Connection for Cruciform Column Section in Low Rise Structures RUG OF UTM Tier 1 |
2014 |
Formulated Elementary Strength And Stability Equations For Thin-Walled Behaviour Of Cold-Formed Steel Joints In Rapid Building-In-Box System (RaBiB) MINISTRY OF EDUCATION Fundamental Research Grant Scheme |
2013 |
Exploring The Interaction of Composite Beam and Slab for Multi-Storey Frame with Interlocking Brick System Produced Locally as Industrialized Building System RUG OF UTM Tier 1 |
2012 |
Rapid Building-in-box System (RaBIB) for Sustainable Residential House RUG OF UTM Tier 1 |
2012 |
Development of New Technologies for Interlocking Brick Block Construction RUG OF UTM Tier 1 |
2012 |
Structural Performance on Cold-formed Steel Joint for House-in-a-Box System RUG OF UTM Tier 2 |
2012 |
MODEL FOR ENERGY EFFICIENCY, ENVIRONMENTAL QUALITY AND MATERIAL USED IN ROAD INFRASTRUCTURES RUG OF UTM Flagship |
2011 |
INNOVATIVE CONSTRUCTION USING COLD-FORMED STEEL SECTIONS FOR LIGHT STEEL STRUCTURES FOR INDUSTRIALISED BUILDING SYSTEM RUG OF UTM Tier 1 |
2011 |
Investigation on Precast Floor Panel using Lightweight Concrete and Cold-formed Steel Section. RUG OF UTM Tier 2 |
2011 |
INNOVATIVE OPTICAL FIBRE SENSING OF HIGHWAY AND GEOTECHNICAL INFRASTRUCTURES Tier 1 |
2011 |
ANALYTICAL STUDY OF BLIND BOLTED CONNECTIONS TO STRUCTURAL HOLLOW SECTIONS RUG OF UTM Tier 2 |
2011 |
Analytical Models for Strength of Composite Joints in Light Steel Framing RUG OF UTM Tier 2 |
2011 |
Analysis and Testing on Fatigue and Coasting for Kiswire Product KISWIRE SDN. BHD. Contract |
2009 |
Construction Design Method for Cold-Formed Steel Structures Using Partial Strength Joints MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund |
2007 |
New Concept Of Construction Method For Foundations System Using Cold-Formed Steel Section. MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund |
2006 |
Design Procedure of the Use of Partial Strength Joints on Multi-Storey Steel Frames Using TWP Sections and Perwaja Sections Non Goverment Agency |
1999 |
Economic Aspect of the use of Partial and Full Strength Joints on Multi - Storey Unbraced Steel Frames MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund |
1998 |
Development of Seismic Hazard Map for Malaysia MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund |
1998 |
Composite Steel/Concrete Beam Stiffened With A Channel Short Term |
1997 |
Analytical Studies of the Behaviour of Semi-Rigid Non-Sway Frames with Tubular Columns Short Term |
1996 |
Predication and Modelling of the Performance and Behaviour of Cement-Block Wall Subjected to Fire Condition MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund |
1996 |
The Design of a New Bridge Deck System Using Locally Manufacturing Structural Steel Element MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund |
1996 |
Development of Earthquake Hazard Reduction Products Using Natural Rubber and Steel MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund |
1996 |
Evaluation On The Performance Of Composite Concrete/Steel Beam Using Locally Produced Materials MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund |
1995 |
Development Of Computer Software For Analysis And Design Of Steel Framed Structures Under Variable Loading Conditions MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund |
1995 |
Analysis, Design And Performance Evaluation Of Trapezoid Web Profile MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund |
1995 |
3D Finite Element Modelling of Semi Rigid Steel Frames During Fire Short Term |
1994 |
Semi & Rigid Analysis of High Rise Steel Building Using Non Linear Finite Element Technique Short Term |
1994 |
Solar System For Public Utility : A Case of Bus Stop Short Term |
1994 |
Performance Of Composite Beam Using Cold-Formed Rectangular Hollow Section Steel Short Term |
1993 |
Performance Evaluation and Non - Destructive Testing or Welded and Bolted Connection in Steel Structures. MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund |
1991 |
Legend : PUBLICATION CATEGORY TYPE OF AUTHORS
Publication Name | Year |
---|---|
STRUCTURAL STEEL DESIGN WITH EUROCODE 3: WORK EXAMPLES FOR OPEN SECTION Original Book CO-AUTHOR |
2022 |
The Polymer Nanocomposite Characteristics On Various Mixtures And Mixing Times In Simple Mixing Method
ENGINEERING SOLID MECHANICS Publication In Scopus UTM FIRST AUTHOR |
2022 |
Experimental Study On Compressive Strength Of Interlocking Hollow Block System (Ihbs) Using Fly Ash
ES WEB OF CONFERENCES Publication In Scopus CO-AUTHOR |
2022 |
GEOPOLYMERS AS SUSTAINABLE SURFACE CONCRETE REPAIR MATERIALS Book (Text) EDITOR |
2022 |
DESIGNING CONCEPTUAL FREE OR LOW MAINTENANCE SUBSTATION FOR PENCAWANG ELEKTRIK (P/E), SISTEM SUIS UTAMA (SSU) AND PENCAWANG PEMBAHAGIAN UTAMA (PPU) Clasified/Technical Report CO-AUTHOR |
2021 |
Partial Strength Beam-To-Column Connection Of Cold-Formed Single Channel Section: Numerical And Experimental Study
ASM SCIENCE JOURNAL Publication In Scopus CO-AUTHOR |
2021 |
STRUCTURAL ASSESSMENT AND FORENSIC INVESTIGATION (REPORT NO: FEC/2020/6) Clasified/Technical Report CO-AUTHOR |
2021 |
Applying A Meta-Heuristic Algorithm To Predict And Optimize Compressive Strength Of Concrete Samples
ENGINEERING WITH COMPUTERS Publication In Web Of Science UTM FIRST AUTHOR |
2021 |
Developing Gep Tree-Based, Neuro-Swarm, And Whale Optimization Models For Evaluation Of Bearing Capacity Of Concrete-Filled Steel Tube Columns
ENGINEERING WITH COMPUTERS Publication In Web Of Science UTM FIRST AUTHOR |
2021 |
Investigating The Effective Parameters On The Risk Levels Of Rockburst Phenomena By Developing A Hybrid Heuristic Algorithm
ENGINEERING WITH COMPUTERS Publication In Web Of Science UTM FIRST AUTHOR |
2021 |
A New Hybrid Simulated Annealing-Based Genetic Programming Technique To Predict The Ultimate Bearing Capacity Of Piles
ENGINEERING WITH COMPUTERS Publication In Web Of Science UTM FIRST AUTHOR |
2021 |
Durability Performance Of Modified Concrete Incorporating Fly Ash And
Effective Microorganism
CONSTRUCTION AND BUILDING MATERIALS Publication In Web Of Science CO-AUTHOR |
2021 |
A Numerical Investigation On The Through Rib Stiffener Beam To Concrete-Filled Steel Tube Column Connections Subjected To Cyclic Loading
ENGINEERING SCIENCE AND TECHNOLOGY, AN INTERNATIONAL JOURNAL Publication In Web Of Science UTM FIRST AUTHOR |
2021 |
Performance Evaluation Of Sustainable Concrete Comprising Waste Polypropylene Food Tray Fibers And Palm Oil Fuel Ash Exposed To Sulfate And Acid Attacks
CRYSTALS Publication In Web Of Science CO-AUTHOR |
2021 |
Applying Dual-Tree Complex Discrete Wavelet Transform And Gamma Modulating Function For Simulation Of Ground Motions
ENGINEERING WITH COMPUTERS Publication In Web Of Science UTM FIRST AUTHOR |
2021 |
A Hybrid Gep And Woa Approach To Estimate The Optimal Penetration Rate Of Tbm In Granitic Rock Mass
SOFT COMPUTING Publication In Web Of Science UTM FIRST AUTHOR |
2021 |
Ga-Svr: A Novel Hybrid Data-Driven Model To Simulate Vertical Load Capacity Of Driven Piles
ENGINEERING WITH COMPUTERS Publication In Web Of Science UTM FIRST AUTHOR |
2021 |
Synergistic Effects Of Waste Plastic Food Tray As Low-Cost Fibrous Materials And Palm Oil Fuel Ash On Transport Properties And Drying Shrinkage Of Concrete
JOURNAL OF BUILDING ENGINEERING Publication In Web Of Science CO-AUTHOR |
2021 |
Green Concrete Composites Production Comprising Metalized Plastic Waste Fibers And Palm Oil Fuel Ash
MATERIALS TODAY-PROCEEDINGS Publication In Web Of Science UTM FIRST AUTHOR |
2021 |
Bending Experiment On A Novel Configuration Of Composite System
Using Rebar As Shear Connectors With Partially Encased Cold-Formed Steel
Built-Up Beams
MATERIAL TODAY : PROCEEDINGS Publication In Web Of Science UTM FIRST AUTHOR |
2021 |
A New Design Of Evolutionary Hybrid Optimization Of Svr Model In Predicting The Blast-Induced Ground Vibration
ENGINEERING WITH COMPUTERS Publication In Web Of Science UTM FIRST AUTHOR |
2021 |
Deep Neural Network And Whale Optimization Algorithm To Assess Flyrock Induced By Blasting
ENGINEERING WITH COMPUTERS Publication In Web Of Science UTM FIRST AUTHOR |
2021 |
Waste Mineral Wool And Its Opportunities—A Review
MATERIALS Publication In Web Of Science CO-AUTHOR |
2021 |
Towards Sustainable Concrete Composites Through Waste Valorisation Of Plastic Food Trays As Low-Cost Fibrous Materials
SUSTAINABILITY Publication In Web Of Science UTM FIRST AUTHOR |
2021 |
Push-Out Test Of Profiled Metal Decking Slabs With Cold-Formed Steel Beams And Rebar Shear Connector
WALAILAK JOURNAL OF SCIENCE AND TECHNOLOGY Publication In Scopus UTM FIRST AUTHOR |
2021 |
Effect Of Bottom Flange Cleat On Integrated Precast Slab And Column Panel Using Cold-Formed Steel
INTERNATIONAL JOURNAL OF ADVANCED TECHNOLOGY AND ENGINEERING EXPLORATION Publication In Scopus UTM FIRST AUTHOR |
2021 |
RESEARCH COLLABORATION ON THE DEVELOPMENT OF IUIU MAIN CAMPUS MASTER PLAN : - TOWARDS 2035 CAMPUS DEVELOPMENT AGENDA Clasified/Technical Report CO-AUTHOR |
2021 |
Prediction Of Flyrock In Mine Blasting: A New Computational Intelligence Approach
NATURAL RESOURCES RESEARCH Publication In Web Of Science UTM FIRST AUTHOR |
2020 |
Awareness Of Building Information Modeling Implementation In Retrofitting The Existing Residential Building In Malaysia
IOP CONFERENCE SERIES: EARTH AND ENVIRONMENTAL SCIENCE Publication In Scopus UTM FIRST AUTHOR |
2020 |
A Monte Carlo Simulation Approach For Effective Assessment Of Flyrock Based On Intelligent System Of Neural Network
ENGINEERING WITH COMPUTERS Publication In Web Of Science UTM FIRST AUTHOR |
2020 |
Assessing Cohesion Of The Rocks Proposing A New Intelligent Technique Namely Group Method Of Data Handling
ENGINEERING WITH COMPUTERS Publication In Web Of Science UTM FIRST AUTHOR |
2020 |
A New Methodology For Optimization And Prediction Of Rate Of Penetration
ENGINEERING WITH COMPUTERS Publication In Web Of Science UTM FIRST AUTHOR |
2020 |
Waste Ceramic As Low Cost And Eco-Friendly Materials In The Production Of Sustainable Mortars
JOURNAL OF CLEANER PRODUCTION Publication In Web Of Science CO-AUTHOR |
2020 |
Sustainable Use Of Waste Polypropylene Fibers And Palm Oil Fuel Ash In The Production Of Novel Prepacked Aggregate Fiber-Reinforced Concrete
SUSTAINABILITY Publication In Web Of Science UTM FIRST AUTHOR |
2020 |
Influence Of Seat Angles On The Behaviour Of Cold-Formed Steel Concrete Composite Joints
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH Publication In Web Of Science UTM FIRST AUTHOR |
2020 |
Waste Metalized Film Food Packaging As Low Cost And Eco-Friendly Fibrous Materials In The Production Of Sustainable And Green Concrete Composites
JOURNAL OF CLEANER PRODUCTION Publication In Web Of Science CO-AUTHOR |
2020 |
Effects Of Waste Ceramic As Cement And Fine Aggregate On Durability Performance Of Sustainable Mortar
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING Publication In Web Of Science CO-AUTHOR |
2020 |
Creep And Drying Shrinkage Performance Of Concrete Composite Comprising Waste Polypropylene Carpet Fibres And Palm Oil Fuel Ash
JOURNAL OF BUILDING ENGINEERING Publication In Web Of Science CO-AUTHOR |
2020 |
Use Of Intelligent Methods To Design Effective Pattern Parameters Of Mine Blasting To Minimize Flyrock Distance
NATURAL RESOURCES RESEARCH Publication In Web Of Science UTM FIRST AUTHOR |
2020 |
Intelligent Prediction Of Blasting-Induced Ground Vibration Using Anfis Optimized By Ga And Pso
NATURAL RESOURCES RESEARCH Publication In Web Of Science UTM FIRST AUTHOR |
2020 |
Forecasting Of Tbm Advance Rate In Hard Rock Condition Based On Artificial Neural Network And Genetic Programming Techniques
BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT Publication In Web Of Science UTM FIRST AUTHOR |
2020 |
Performance Evaluation Of Novel Prepacked Aggregate Concrete With Waste Prolypropylene Fibers At Elevated Temperatures
CONSTRUCTION AND BUILDING MATERIALS Publication In Web Of Science UTM FIRST AUTHOR |
2020 |
Cyclic Behaviour Of Fully-Rigid And Semi-Rigid Steel Beam-To-Column Connections
INTERNATIONAL JOURNAL OF STEEL STRUCTURES Publication In Web Of Science UTM FIRST AUTHOR |
2020 |
A Svr-Gwo Technique To Minimize Flyrock Distance Resulting From Blasting
BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT Publication In Web Of Science UTM FIRST AUTHOR |
2020 |
Random Forest And Bayesian Network Techniques For Probabilistic Prediction Of Flyrock Induced By Blasting In Quarry Sites
NATURAL RESOURCES RESEARCH Publication In Web Of Science UTM FIRST AUTHOR |
2020 |
Enhanced Performance Of Concrete Composites Comprising Waste Metalised Polypropylene Fibres Exposed To Aggresive Environments
CRYSTALS Publication In Web Of Science UTM FIRST AUTHOR |
2020 |
Drying Shrinkage And Creep Properties Of Prepacked Aggregate Concrete Reinforced With Waste Polypropylene Fibers
JOURNAL OF BUILDING ENGINEERING Publication In Web Of Science UTM FIRST AUTHOR |
2020 |
Durability And Thermal Properties Of Prepacked Aggregate Concrete Reinforced With Waste Polypropylene Fibers
JOURNAL OF BUILDING ENGINEERING Publication In Web Of Science UTM FIRST AUTHOR |
2020 |
Enhancement Of Strength And Transport Properties Of A Novel Preplaced Aggregate Fiber Reinforced Concrete By Adding Waste Polypropylene Carpet Fibers
JOURNAL OF BUILDING ENGINEERING Publication In Web Of Science UTM FIRST AUTHOR |
2020 |
The Impact Resistance And Deformation Performance Of Novel Pre-Packed Aggregate Concrete Reinforced With Waste Polypropylene Fibres
CRYSTALS Publication In Web Of Science UTM FIRST AUTHOR |
2020 |
Can Cold-Formed Steel Section Be Use As A Sustainable Structural Member In Building And Civil Engineering Constructions? A Mini Review
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING Publication In Scopus CO-AUTHOR |
2020 |
Sustainable Residential Building Retrofit For Improving Energy Efficiency: The Owners' Perspective In Malaysia
IOP CONFERENCE SERIES: EARTH AND ENVIRONMENTAL SCIENCE Publication In Scopus UTM FIRST AUTHOR |
2020 |
Analytical And Experimental Investigation On Slip-In Gusset Plate Connection For Double C-Channel Sections Of Cold-Formed Steel
OPEN CIVIL ENGINEERING JOURNAL Publication In Scopus UTM FIRST AUTHOR |
2020 |
Utilisation Of Waste Marble Powder As Low-Cost Cementing Materials In The Production Of Mortar
JOURNAL OF BUILDING ENGINEERING Publication In Scopus UTM FIRST AUTHOR |
2020 |
Factors Affecting The Delay In Construction At Mentawai Island, Indonesia
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING Publication In Scopus UTM FIRST AUTHOR |
2020 |
Introducing Effective Microorganism As Self-Curing Agent In Self-Cured Concrete
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING Publication In Scopus CO-AUTHOR |
2020 |
Experimental Study Of Slip In Haunched Gusset Plate For Cold Formed Steel Connections
INTERNATIONAL JOURNAL OF SCIENTIFIC AND TECHNOLOGY RESEARCH Publication In Scopus UTM FIRST AUTHOR |
2020 |
Flexural Performance Of Cold-Formed Steel Section In A Composite Beam System
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING Publication In Scopus CO-AUTHOR |
2020 |
Behaviour Of Composite Beam Arranged As Boxed-Section With C-Channel Of Cold-Formed Steel Of Lipped Section
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING Publication In Scopus CORRESPONDING AUTHOR |
2020 |
Behavior Of Partial Strength Of Beam-To-Column Connection With Gusset Plate For Cold-Formed Steel Sections
ASEAN ENGINEERING JOURNAL Publication In Scopus UTM FIRST AUTHOR |
2020 |
Implementation Of Building Information Modeling For Construction Clash
Detection Process In The Design Stage: A Case Study Of Malaysian
Police Headquarter Building
IOP CONFERENCE SERIES: EARTH AND ENVIRONMENTAL SCIENCE Publication In Scopus UTM FIRST AUTHOR |
2020 |
Experimental Study On Composite Connection With Double Lipped C- Sections
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING Publication In Scopus UTM FIRST AUTHOR |
2020 |
Flexural Behaviour Of Interlocking Brick System With Grout Cement Mixed With Various Fibre
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING Publication In Scopus CORRESPONDING AUTHOR |
2020 |
Awareness Of Adopting Building Information Modelling In Construction - Case Study Of Consultants Perception In West Sumatra
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING Publication In Scopus CO-AUTHOR |
2020 |
Behaviour Of Rectangular Gusset Plate With Angle Cleat Connections For Cold-Formed Steel Section
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING Publication In Scopus UTM FIRST AUTHOR |
2020 |
A Combination Of Feature Selection And Random Forest Techniques To Solve A Problem Related To Blast-Induced Ground Vibration
APPLIED SCIENCES (SWITZERLAND) Publication In Scopus UTM FIRST AUTHOR |
2020 |
Neuro-Genetic, Neuro-Imperialism And Genetic Programing Models In Predicting Ultimate Bearing Capacity Of Pile
ENGINEERING WITH COMPUTERS Publication In Web Of Science CORRESPONDING AUTHOR |
2020 |
EUROCODE 3 (EC3) DESIGN OF STEEL STRUCTURES Original Book CO-AUTHOR |
2019 |
Experimental And Analytical Study On Composite Connection With Cold-Formed Steel Of Double Channel Sections
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING Publication In Scopus UTM FIRST AUTHOR |
2019 |
Performance Evaluation Of Green Mortar Comprising Ceramic Waste As Cement And Fine Aggregates Replacement
SN APPLIED SCIENCES Journal Article Non Citation-Indexed CO-AUTHOR |
2019 |
Effectiveness Of Tropical Soil Bacteria As Self-Healing Agent In Concrete
IOP CONFERENCE SERIES: EARTH AND ENVIRONMENTAL SCIENCE Publication In Web Of Science CO-AUTHOR |
2019 |
Properties Of Ceramic Tile Waste Based Alkali-Activated Mortars Incorporating Gbfs And Fly Ash
CONSTRUCTION AND BUILDING MATERIALS Publication In Web Of Science CO-AUTHOR |
2019 |
Evaluation Of Alkali-Activated Mortars Containing High Volume Waste Ceramic Powder And Fly Ash Replacing Gbfs
CONSTRUCTION AND BUILDING MATERIALS Publication In Web Of Science CO-AUTHOR |
2019 |
Structural Performance Of Steel Beams And Frames With Slant End-Plate Connections At Elevated Temperature
ENGINEERING STRUCTURES Publication In Web Of Science CO-AUTHOR |
2019 |
Push-Out Tests On Three Innovative Shear Connectors For Composite Cold-Formed Steel Concrete Beams
CONSTRUCTION AND BUILDING MATERIAL Publication In Web Of Science UTM FIRST AUTHOR |
2019 |
Enhanced Performance Of Green Mortar Comprising High Volume Of
Ceramic Waste In Aggressive Environments
CONSTRUCTION AND BUILDING MATERIALS Publication In Web Of Science CO-AUTHOR |
2019 |
Intelligent Design Of Retaining Wall Structures Under Dynamic Conditions
STEEL AND COMPOSITE STRUCTURES Publication In Web Of Science UTM FIRST AUTHOR |
2019 |
Supervised Machine Learning Techniques To The Prediction Of Tunnel Boring Machine Penetration Rate
APPLIED SCIENCES-BASEL Publication In Web Of Science UTM FIRST AUTHOR |
2019 |
Simplification Analysis Of Suction Pile Using Two Dimensions Finite Element Modeling
GEOMECHANICS AND ENGINEERING Publication In Web Of Science UTM FIRST AUTHOR |
2019 |
Fresh And Hardened Properties Of Concrete Containing Effective Microorganisms
IOP CONFERENCE SERIES-EARTH AND ENVIRONMENTAL SCIENCE Publication In Web Of Science CO-AUTHOR |
2019 |
Proposing A New Model To Approximate The Elasticity Modulus Of Granite Rock Samples Based On Laboratory Tests Results
BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT Publication In Web Of Science UTM FIRST AUTHOR |
2019 |
Performance Evaluation Of Pre-Fabricated Footing Using Cold-Formed Steel Of Lipped C-Channel Section
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING Publication In Web Of Science UTM FIRST AUTHOR |
2019 |
An Overview Of The Connection Classification Index
ADVANCED STEEL CONSTRUCTION Publication In Web Of Science UTM FIRST AUTHOR |
2019 |
Structural Behaviour Of Cold-Formed Steel Of Double C-Lipped Channel Sections Integrated With Concrete Slabs As Composite Beams
LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES Publication In Web Of Science CORRESPONDING AUTHOR |
2019 |
Production Of Sustainable Mortar Comprising Waste Ceramic
Nanoparticles
SMART NANOCONCRETES AND CEMENT-BASED MATERIALS Book Chapter UTM FIRST AUTHOR |
2019 |
Experimental Study On Flexural Behaviour Of Partially Encased Cold-Formed Steel Composite Beams Using Rebar As Shear Connector
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING Publication In Scopus UTM FIRST AUTHOR |
2019 |
Structural Behaviour Of Slip-In Gusset Plate Connection For Double Lipped Channel Cold Formed Steel Using Partial Strength Connection
INTERNATIONAL JOURNAL OF SCIENTIFIC AND TECHNOLOGY RESEARCH Publication In Scopus UTM FIRST AUTHOR |
2019 |
EUROCODE 3 (EC3) DESIGN OF STEEL STRUCTURES Original Book CO-AUTHOR |
2019 |
Fresh And Hardened Properties Of Concrete Containing Effective Microorganisms
THE 12TH INTERNATIONAL CIVIL ENGINEERING POST GRADUATE CONFERENCE (SEPKA) THE 3RD INTERNATIONAL SYMPOSIUM ON EXPERTISE OF ENGINEERING DESIGN (ISEED) Conference Paper CO-AUTHOR |
2018 |
Behavior Of Boxed Cold-Formed Steel As Composite Beam With Rebar As Shear Connector
SUSTAINABLE CIVIL INFRASTRUCTURES Publication In Scopus CORRESPONDING AUTHOR |
2018 |
Experimental Study On Flexural Behavior Of Partially Encased Cold-Formed Steel Composite Beams Using Rebar As Shear Connector
10TH ASIA PACIFIC STRUCTURAL ENGINEERING AND CONSTRUCTION CONFERENCE (APSEC 2018) Conference Paper UTM FIRST AUTHOR |
2018 |
Structural Performance Of Isolated Steel Beam-To-Column Connection
AMERICAN JOURNAL OF CIVIL ENGINEERING AND ARCHITECTURE Journal Article Non Citation-Indexed UTM FIRST AUTHOR |
2018 |
Performance Prediction Of Tunnel Boring Machine Through Developing A Gene Expression Programming Equation
ENGINEERING WITH COMPUTERS Publication In Web Of Science UTM FIRST AUTHOR |
2018 |
Airblast Prediction Through A Hybrid Genetic Algorithm-Ann Model
NEURAL COMPUTING AND APPLICATIONS Publication In Web Of Science CO-AUTHOR |
2018 |
Synergism Between Palm Oil Fuel Ash And Slag: Production Of Environmental-Friendly Alkali Activated Mortars With Enhanced Properties
CONSTRUCTION AND BUILDING MATERIALS Publication In Web Of Science CO-AUTHOR |
2018 |
Enhanced Corrosion Resistance Of Reinforced Concrete: Role Of Emerging Eco-Friendly Elaeis Guineensis/Silver Nanoparticles Inhibitor
CONSTRUCTION AND BUILDING MATERIALS Publication In Web Of Science CO-AUTHOR |
2018 |
Waste Ceramic Powder Incorporated Alkali Activated Mortars Exposed To Elevated Temperatures: Performance Evaluation
CONSTRUCTION AND BUILDING MATERIALS Publication In Web Of Science CO-AUTHOR |
2018 |
Durability Performance Of Concrete Incorporating Waste Metalized Plastic Fibres And Palm Oil Fuel Ash
CONSTRUCTION AND BUILDING MATERIALS Publication In Web Of Science UTM FIRST AUTHOR |
2018 |
Enhanced Performance For Aggressive Environments Of Green Concrete Composites Reinforced With Waste Carpet Fibers And Palm Oil Fuel Ash
JOURNAL OF CLEANER PRODUCTION Publication In Web Of Science UTM FIRST AUTHOR |
2018 |
The Feasibility Of Improving Impact Resistance And Strength Properties Of Sustainable Concrete Composites By Adding Waste Metalized Plastic Fibres
CONSTRUCTION AND BUILDING MATERIALS Publication In Web Of Science UTM FIRST AUTHOR |
2018 |
Microstructure And Strength Properties Of Mortar Containing Waste Ceramic Nanoparticles
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING Publication In Web Of Science CO-AUTHOR |
2018 |
Measurement Of Strain On Concrete Using An Ordinary Digital Camera
MEASUREMENT Publication In Web Of Science CORRESPONDING AUTHOR |
2018 |
Fire Resistance Of A Damaged Building Employing Buckling Restrained Braced System
ADVANCED STEEL CONSTRUCTION Publication In Web Of Science CORRESPONDING AUTHOR |
2018 |
A Passive Metallic Damper With Replaceable Steel Bar Components For Earthquake Protection Of Structures
ENGINEERING STRUCTURES Publication In Web Of Science CORRESPONDING AUTHOR |
2018 |
Conceptual Design Using Industrialized Building System For Affordable Housing Construction In Indonesia
ADVANCED SCIENCE LETTERS Publication In Web Of Science CORRESPONDING AUTHOR |
2018 |
Factors Affecting The Construction Delay In Mentawai Island, Indonesia
ADVANCED SCIENCE LETTERS Publication In Web Of Science CORRESPONDING AUTHOR |
2018 |
Distribution Of Shear Force In Perforated Shear Connectors
STEEL AND COMPOSITE STRUCTURES Publication In Web Of Science UTM FIRST AUTHOR |
2018 |
Effects Of Pofa Replaced With Fa On Durability Properties Of Gbfs Included Alkali Activated Mortars
CONSTRUCTION AND BUILDING MATERIALS Publication In Web Of Science UTM FIRST AUTHOR |
2018 |
I-Beam To Square Hollow Column Blind Bolted Moment Connection: Experimental And Numerical Study
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH Publication In Web Of Science CORRESPONDING AUTHOR |
2018 |
Experimental Study On The Performance Of Slant End-Plate Connections At Elevated Temperature
ADVANCED STEEL CONSTRUCTION Publication In Web Of Science CO-AUTHOR |
2018 |
Production Of Sustainable Fibre-Reinforced Concrete Incorporating Waste Chopped Metallic Film Fibres And Palm Oil Fuel Ash
SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES Publication In Web Of Science UTM FIRST AUTHOR |
2018 |
Strength And Transport Properties Of Concrete Composites Incorporating Waste Carpet Fibres And Palm Oil Fuel Ash
JOURNAL OF BUILDING ENGINEERING Publication In Web Of Science UTM FIRST AUTHOR |
2018 |
Experimental Study Of Pipe-Fuse Damper For Passive Energy Dissipation In Structures
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH Publication In Web Of Science CORRESPONDING AUTHOR |
2018 |
Experimental Investigations On Monotonic And Cyclic Behavior Of Steel Pallet Rack Connections
ENGINEERING FAILURE ANALYSIS Publication In Web Of Science UTM FIRST AUTHOR |
2018 |
Economic Aspects Of Cold Formed Steel Section Designed As Composite Beam
ADVANCED SCIENCE LETTERS Publication In Web Of Science UTM FIRST AUTHOR |
2018 |
Production Of Sustainable Green Concrete Composites Comprising Industrial Waste Carpet Fibres
GREEN COMPOSITES SUSTAINABLE RAW MATERIALS Book Chapter UTM FIRST AUTHOR |
2018 |
Experimental Investigation On Lightweight Composite Slab For Floating Structures
IMPROVING FLOOD MANAGEMENT, PREDICTION AND MONITORING: CASE STUDIES IN ASIA Book Chapter CO-AUTHOR |
2018 |
Impact Of Curing Temperatures And Alkaline Activators On Compressive Strength And Porosity Of Ternary Blended Geopolymer Mortars
CASE STUDIES IN CONSTRUCTION MATERIALS Publication In Scopus CO-AUTHOR |
2018 |
Comparative Study Between Linear-Interpolation And Stress-Block Methods Of Composite Design Using Cold-Formed Steel Section
INTERNATIONAL JOURNAL OF ENGINEERING AND TECHNOLOGY(UAE) Publication In Scopus CO-AUTHOR |
2018 |
Effect Of Binder To Fine Aggregate Content On Performance Of Sustainable Alkali Activated Mortars Incorporating Solid Waste Materials
CHEMICAL ENGINEERING TRANSACTIONS Publication In Scopus CO-AUTHOR |
2018 |
Performance Of Sustainable Alkali Activated Mortars Containing Solid Waste Ceramic Powder
CHEMICAL ENGINEERING TRANSACTIONS Publication In Scopus CO-AUTHOR |
2018 |
Effectiveness Of Tropical Soil Bacteria As Self-Healing Agent In Concrete
THE 12TH INTERNATIONAL CIVIL ENGINEERING POST GRADUATE CONFERENCE (SEPKA) THE 3RD INTERNATIONAL SYMPOSIUM ON EXPERTISE OF ENGINEERING DESIGN (ISEED) Conference Paper CO-AUTHOR |
2018 |
Case Study On Safety Consideration In The Construction Of Horse Stable
1ST INTERNATIONAL CONGRESS ON INNOVATIONS IN CIVIL ENGINEERING (ICE 2017) Conference Paper CO-AUTHOR |
2017 |
Economic Aspects Of Interlocking Hollow Brick System Designed For Industrialized Building System
AIP CONFERENCE PROCEEDINGS Publication In Scopus CORRESPONDING AUTHOR |
2017 |
Structural Behavior Of Prefabricated Pad Footing System Designed Using Cold-Formed Steel Lipped Channel Section
2ND PROCEEDING OF CIVIL ENGINEERING: VOLUME 1 - STRUCTURE AND MATERIALS Proceedings CO-AUTHOR |
2017 |
Seismic Assessment Of Base-Isolated Nuclear Power Plants
ADVANCES IN COMPUTATIONAL DESIGN Journal Article Non Citation-Indexed CO-AUTHOR |
2017 |
Improvement Of Problematic Soils With Biopolymer - An Environmentally Friendly Soil Stabilizer
JOURNAL OF MATERIALS IN CIVIL ENGINNERING Publication In Web Of Science CO-AUTHOR |
2017 |
Numerical Analysis Of Tilted Angle Shear Connectors In Steel-Concrete Composite Systems
STEEL AND COMPOSITE STRUCTURES Publication In Web Of Science UTM FIRST AUTHOR |
2017 |
A New Developed Approach For The Prediction Of Ground Vibration
Using A Hybrid Pso-Optimized Anfis-Based Model
ENVIRONMENTAL EARTH SCIENCES Publication In Web Of Science UTM FIRST AUTHOR |
2017 |
Application Of Pso To Develop A Powerful Equation For Prediction
Of Flyrock Due To Blasting
NEURAL COMPUTING AND APPLICATIONS Publication In Web Of Science CO-AUTHOR |
2017 |
Seismic Performance Of Steel Frames With Semirigid Connections
JOURNAL OF ENGINEERING Publication In Web Of Science CORRESPONDING AUTHOR |
2017 |
Evaluation Of The Seismic Performance Of Special Moment Frames Using Incremental Nonlinear Dynamic Analysis
STRUCTURAL ENGINEERING AND MECHANICS Publication In Web Of Science UTM FIRST AUTHOR |
2017 |
Splitting Tensile Strength Of Lightweight Foamed Concrete With Polypropylene Fiber
INTERNATIONAL JOURNAL ON ADVANCED SCIENCE, ENGINEERING AND INFORMATION TECHNOLOGY Publication In Scopus CO-AUTHOR |
2017 |
Experimental Behaviour Of Beam-Column Connection Using Cold-Formed Steel Sections With Rectangular Gusset-Plate
AIP CONFERENCE PROCEEDINGS Publication In Scopus UTM FIRST AUTHOR |
2017 |
Finite Element Analysis Of Composite Beam-To-Column Connection With Cold-Formed
Steel Section
AIP CONFERENCE PROCEEDINGS Publication In Scopus UTM FIRST AUTHOR |
2017 |
Structural Aspects Of Cold-Formed Steel Section Designed As U-Shape Composite Beam
AIP CONFERENCE PROCEEDINGS Publication In Scopus CORRESPONDING AUTHOR |
2017 |
Prediction On Flexural Strength Of Encased Composite Beam With Cold-Formed Steel Section
AIP CONFERENCE PROCEEDINGS Publication In Scopus UTM FIRST AUTHOR |
2017 |
Experimental Investigation Of Long Interlocking Brick Column Subjected To Eccentric Load
2ND PROCEEDING OF CIVIL ENGINEERING: VOLUME 1 - STRUCTURE AND MATERIALS Proceedings CO-AUTHOR |
2017 |
Post-Disaster Building Damage Classification Of Flood Affected Area: Manek Urai, Kelantan, Malaysia
ABSTRACT OF EMERGING TRENDS IN SCIENTIFIC RESEARCH Proceedings CO-AUTHOR |
2016 |
Splitting Tensile Strength Of Lightweight Foamed Concrete With Polypropylene Fiber
SRIWIJAYA INTERNATIONAL CONFERENCE ON ENGINEERING SCIENCE AND TECHNOLOGY (SICEST) 2016 Conference Paper CO-AUTHOR |
2016 |
Readiness Of Civil Engineering Faculty Members In Implementing Mooc
REGIONAL CONFERENCE ON ENGINEERING EDUCATION 2016 Conference Paper CO-AUTHOR |
2016 |
Structural Post-Disaster Damage Classification With Consideration Of Liquefaction Due To Flood: Manek Urai, Kelantan, Malaysia
INTERNATIONAL JOURNAL OF SUSTAINABLE ENERGY AND ENVIRONMENTAL RESEARCH Journal Article Non Citation-Indexed CO-AUTHOR |
2016 |
Influence Of Shear Connector Size On Ultimate Strength In Composite Construction With Cold-Formed Steel Channel Lipped Section
REVIEW OF INDUSTRIAL ENGINEERING LETTERS Journal Article Non Citation-Indexed UTM FIRST AUTHOR |
2016 |
Structural Post-Disaster Damage Classification With Consideration Of Liquefaction Due To Flood: Manek Urai Kelantan, Malaysia
INTERNATIONAL JOURNAL OF SUSTAINABLE ENERGY AND ENVIRONMENTAL RESEARCH Journal Article Non Citation-Indexed CO-AUTHOR |
2016 |
Evaluation Of New Spiral Shear Reinforcement Pattern For Reinforced Concrete Joints Subjected To Cyclic Loading
ADVANCES IN STRUCTURAL ENGINEERING Publication In Web Of Science CO-AUTHOR |
2016 |
Bolted Shear Connectors Performance In Self-Compacting Concrete Integrated With Cold-Formed Steel Section
LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES Publication In Web Of Science UTM FIRST AUTHOR |
2016 |
Effect Of Magnesium Chloride Solution On The Physico-Chemical Characteristics Of Tropical Peat
ENVIRONMENTAL EARTH SCIENCES Publication In Web Of Science CO-AUTHOR |
2016 |
Time-Dependent Physicochemical Characteristics Of Malaysian Residual Soil Stabilized With Magnesium Chloride Solution
ARABIAN JOURNAL OF GEOSCIENCES Publication In Web Of Science CO-AUTHOR |
2016 |
Behavior Of Pre-Cast U-Shaped Composite Beam Integrating Cold-Formed Steel With Ferro-Cement Slab
THIN-WALLED STRUCTURES Publication In Web Of Science CORRESPONDING AUTHOR |
2016 |
Strength Prediction Of Rotary Brace Damper Using Mlr And Mars
STRUCTURAL ENGINEERING AND MECHANICS, AN INT'L JOURNAL Publication In Web Of Science UTM FIRST AUTHOR |
2016 |
Effect Of Web Holes And Bearing Stiffeners On Flexural-Shear Interaction Strength Of Steel Cold-Formed C-Channel Sections
LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES Publication In Web Of Science CORRESPONDING AUTHOR |
2016 |
Numerical Study On The Structural Performance Of Steel Beams With Slant End-Plate Connections
LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES Publication In Web Of Science CORRESPONDING AUTHOR |
2016 |
Cyclic And Explosive Evaluation Of New Proposed Steel Joint
ADVANCES IN CIVIL ENGINEERING Publication In Web Of Science CORRESPONDING AUTHOR |
2016 |
Performance Of Steel Beams Strengthened With Pultruded Cfrp Plate Under Various Exposures
STEEL AND COMPOSITE STRUCTURES Publication In Web Of Science CO-AUTHOR |
2016 |
Behaviour And Design Of Cold-Formed Steel C-Sections With Cover Plates Under Bending
INTERNATIONAL JOURNAL OF STEEL STRUCTURES Publication In Web Of Science CORRESPONDING AUTHOR |
2016 |
ADVANCES IN CONSTRUCTION, ENGINEERING, AND PLANNING Book (Text) CO-AUTHOR |
2016 |
Economic Aspects Of Cruciform Column Used In The Design Of Unbraced Multi-Storey Steel Frame
ADVANCES IN CONSTRUCTION ENGINEERING, MANAGEMENT, AND PLANNING Book Chapter UTM FIRST AUTHOR |
2016 |
Types Of Shear Connectors In Steel Concrete Composite Beams: A Review
ADVANCES IN CONSTRUCTION, ENGINEERING, MANAGEMENT, AND PLANNING Book Chapter UTM FIRST AUTHOR |
2016 |
Temperature Development Of Cold Formed Steel Column Channel Section Under Standard Fire
INTERNATIONAL CONFERENCE ON ADVANCED SCIENCE, ENGINEERING AND TECHNOLOGY (ICASET) Publication In Scopus CO-AUTHOR |
2016 |
Temperature Rise Of Cold-Formed Steel Built-Up Back-To-Back Column Under Standard Fire
JURNAL TEKNOLOGI Publication In Scopus CO-AUTHOR |
2016 |
Study On Mechanical Behaviour Of Cold-Formed Steel Channel Pre Cut-Curving Beam
AIP CONFERENCE PROCEEDINGS - 1ST INTERNATIONAL CONFERENCE ON ADVANCED SCIENCE, ENGINEERING AND TECHNOLOGY, ICASET 2015 Publication In Scopus CO-AUTHOR |
2016 |
Strengthening Method And Structural Performance Of Cold-Formed Cut-Curved Steel Under Compression
JURNAL TEKNOLOGI Publication In Scopus CO-AUTHOR |
2016 |
Experimental Study On Flexural Behavior Of Cold-Formed Steel Channels With Curved Section
ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES Publication In Scopus CO-AUTHOR |
2016 |
Experimental And Analytical Study Of Various Shear Connectors Used For Cold-Formed Steel-Ferrocement Composite Beam
APPLIED MECHANICS AND MATERIALS Proceedings CORRESPONDING AUTHOR |
2015 |
Structural Performance Of Cold-Formed Steel Section In Composite Structures: A Review
JURNAL TEKNOLOGI Publication In Scopus CORRESPONDING AUTHOR |
2015 |
JOHOR-RIAU LINK DEVELOPMENT Policy Paper CO-AUTHOR |
2015 |
Compressive Strength Of Ground Waste Seashells In Cement Mortars For Masonry And Plastering
APPLIED MECHANICS AND MATERIALS Proceedings CO-AUTHOR |
2015 |
Influence Of Shear Connector Size On Ultimate Strength In Composite Construction With Cold-Formed Steel Channel Lipped Section
4TH INTERNATIONAL CONFERENCE ON EMERGING TRESNDS IN SCIENTIFIC RESEARCH Proceedings UTM FIRST AUTHOR |
2015 |
Impact Of Shear Connector Spacing In Composite Construction Incorporating Cold-Formed Steel Channel Lipped Section
4TH INTERNATIONAL CONFERENCE ON EMERGING TRENDS IN SCIENTIFIC RESEARCH Proceedings CORRESPONDING AUTHOR |
2015 |
Wind-Moment Design Of Semi-Rigid Un-Braced Steel Frames Using Cruciform Column (Ccub) Section
INTERNATIONAL JOURNAL OF STEEL STRUCTURES Publication In Web Of Science CO-AUTHOR |
2015 |
Severe Loading Assessment Of Modern And New Proposed Beam To Column Connections
LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES Publication In Web Of Science CO-AUTHOR |
2015 |
Behavior Of Shear Connectors In Composite Column Of Cold-Formed Steel With Lipped C-Channel Assembled With Ferro-Cement Jacket
CONSTRUCTION AND BUILDING MATERIALS Publication In Web Of Science CORRESPONDING AUTHOR |
2015 |
Seismic And Progressive Collapse Assessment Of New Proposed Steel Connection
ADVANCES IN STRUCTURAL ENGINEERING Publication In Web Of Science CO-AUTHOR |
2015 |
Seismic And Progressive Collapse Assessment Of Sideplate Moment Connection System
STRUCTURAL ENGINEERING AND MECHANICS Publication In Web Of Science CO-AUTHOR |
2015 |
An Experimental Investigation Of Stiffened Cold-Formed C-Channels In Pure Bending And Primarily Shear Conditions
THIN-WALLED STRUCTURES Publication In Web Of Science CORRESPONDING AUTHOR |
2015 |
Elastic Design Of Slender High-Strength Rc Circular Columns Confined With External Tensioned Steel Straps
ADVANCES IN STRUCTURAL ENGINEERING Publication In Web Of Science CO-AUTHOR |
2015 |
Seismic Performance Of Ductility Classes Medium Rc Beam-Column Connections With Continuous Rectangular Spiral Transverse Reinforcements
LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES Publication In Web Of Science CO-AUTHOR |
2015 |
Standardization Of Composite Connections For Trapezoid Web Profiled Steel Sections
STRUCTURAL ENGINEERING AND MECHANICS Publication In Web Of Science CORRESPONDING AUTHOR |
2015 |
A Numerical Analysis On The Performance Of Buckling Restrained Braced At Fire-Study Of The Gap Filler Effect
STEEL AND COMPOSITE STRUCTURES Publication In Web Of Science CORRESPONDING AUTHOR |
2015 |
Fire Response Of A 3d Multi-Storey Building With Buckling Restrained Braces
LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES Publication In Web Of Science CORRESPONDING AUTHOR |
2015 |
SUSTAINABLE CONSTRUCTION MANAGEMENT AND BUILDING DESIGN TECHNOLOGIES Book (Text) UTM FIRST AUTHOR |
2015 |
Performance Of Varying Bolted Shear Connectors In Cold-Formed Steel Composite Beam
ARCHITECTURAL ENGINEERING AND NEW MATERIALS Book Chapter CORRESPONDING AUTHOR |
2015 |
Construction Disputes Due To Delay
SUSTAINABLE CONSTRUCTION MANAGEMENT AND BUILDING DESIGN TECHNOLOGIES Book Chapter CO-AUTHOR |
2015 |
Influence Of Longitudinal Spaced Bolted Shear Connectors On Composite Beam Integrated With Concrete And Cold-Formed Steel
ARCHITECTURAL ENGINEERING AND NEW MATERIALS Book Chapter CORRESPONDING AUTHOR |
2015 |
Analytical Study Of End-Plate Connection On Cruciform Column Section
JURNAL TEKNOLOGI Publication In Scopus CO-AUTHOR |
2015 |
Resistance Of Concrete Protective Coatings In Different Chemical Environments
JURNAL TEKNOLOGI Publication In Scopus CO-AUTHOR |
2015 |
Shear Capacity Evaluation Of Reinforced Concrete Beams: Finite Element Simulation
JURNAL TEKNOLOGI Publication In Scopus UTM FIRST AUTHOR |
2015 |
Finite Element Modelling Of Compartment Fire Using Abaqus
JURNAL TEKNOLOGI Publication In Scopus CO-AUTHOR |
2015 |
Comparative Study Of Eight Metallic Yielding Dampers
JURNAL TEKNOLOGI Publication In Scopus CORRESPONDING AUTHOR |
2015 |
Steel Weight Saving Developed From Semi-Continuous Construction In Multi-Storey Braced Steel Frame Based On Euro-Code 3
JURNAL TEKNOLOGI Publication In Scopus CORRESPONDING AUTHOR |
2015 |
Push-Out Tests Of Innovative Shear Connectors Between Cold-Formed Steel Section Integrated With Ferrocement Jacket
JURNAL TEKNOLOGI Publication In Scopus CORRESPONDING AUTHOR |
2015 |
Strength Capacity Of Bolted Shear Connectors With Cold-Formed Steel Section Integrated As Composite Beam In Self-Compacting Concrete
JURNAL TEKNOLOGI Publication In Scopus CORRESPONDING AUTHOR |
2015 |
Composite Construction Of Cold-Formed Steel (Cfs) Section With High Strength Bolted Shear Connector
JURNAL TEKNOLOGI Publication In Scopus CORRESPONDING AUTHOR |
2015 |
Effectiveness Of Palm Oil Fuel Ash As
Micro-Filler In Polymer Concrete
JURNAL TEKNOLOGI Publication In Scopus CO-AUTHOR |
2015 |
Effectiveness Of Palm Oil Fuel Ash As Micro-Filler In Polymer Concrete
2ND INTERNATIONAL CONFERENCE ON CONSTRUCTION AND BUILDING ENGINEERING (ICONBUILD 2015) Conference Paper CO-AUTHOR |
2015 |
Experimental Study Onbolted Shear Connector Enhancement In
Precast Cold-Formed Steel-Ferrocementfor Composite Beam System
THE 2014 1ST INTERNATIONAL CONFERENCE ON ADVANCED MATERIAL AND STRUCTURAL MECHANICAL ENGINEERING (ICAMSME 2014) Conference Paper CORRESPONDING AUTHOR |
2014 |
Ultimate Load Of Built-Up Cold Formed Steel Column
ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES Publication In Scopus CO-AUTHOR |
2014 |
Report On Lateral Sway Test Of Non-Compact Light Steel Frame
NATIONAL SEMINAR ON CIVIL ENGINEERING RESEARCH (SEPKA2014) Conference Paper CO-AUTHOR |
2014 |
Engineering Properties Of Bio-Inspired Cement Mortar Containing Seashell Powder
NATIONAL SEMINAR ON CIVIL ENGINEERING RESEARCH SEPKA2014 Conference Paper CO-AUTHOR |
2014 |
Seismic Assessment Of Rc Frames With Setbacks
AMERICAN JOURNAL OF CIVIL ENGINEERING AND ARCHITECTURE Journal Article Non Citation-Indexed CO-AUTHOR |
2014 |
Review On Cold-Formed Steel Connections
SCIENTIFIC WORLD JOURNAL Publication In Web Of Science CO-AUTHOR |
2014 |
Performance Of Partial Strength Connection Connected By Thick Plate Between Column Flanges
STRUCTURAL ENGINEERING AND MECHANICS Publication In Web Of Science CORRESPONDING AUTHOR |
2014 |
Thermal Behavior Of Cylindrical Buckling Restrained Braces At Elevated Temperatures
SCIENTIFIC WORLD JOURNAL Publication In Web Of Science CORRESPONDING AUTHOR |
2014 |
Preferred Test Methods To Select Suitable Surface Repair Materials In Severe Climates
CONSTRUCTION AND BUILDING MATERIALS Publication In Web Of Science UTM FIRST AUTHOR |
2014 |
Comparative Study On The Behaviour Of Buckling Restrained Braced Frames At Fire
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH Publication In Web Of Science CORRESPONDING AUTHOR |
2014 |
Economic Aspect Of Square Hollow Section In The Design Of Multi-Storey Unbraced Steel Frame
MATERIALS RESEARCH INNOVATIONS Publication In Web Of Science CO-AUTHOR |
2014 |
Preferred Test Methods To Select Suitable Surface Repair Materials
In Severe Climates
CONSTRUCTION AND BUILDING MATERIALS Publication In Web Of Science UTM FIRST AUTHOR |
2014 |
Sulphate Resistance Of Geopolymer Concrete Prepared From Blended Waste Fuel Ash
Journal of Materials in Civil Engineering Publication In Web Of Science CO-AUTHOR |
2014 |
Evaluation Of Extreme Load Performance Of Pre-Northridge Connections
GRADEVINAR Publication In Web Of Science CO-AUTHOR |
2014 |
Emerging Issues On Sustainable Urban Development
EMERGING ISSUES ON SUSTAINABLE URBAN DEVELOPMENT Book Chapter CORRESPONDING AUTHOR |
2014 |
Influence Of Angle Thickness Towards Stiffness And Strength Prediction For Cold-Formed Steel Top-Seat Flange Cleat Connection
APPLIED MECHANICS AND MATERIALS Publication In Scopus CO-AUTHOR |
2014 |
Seismic Performance Of Rc Beam-Column Connections With Continuous Rectangular Spiral Transverse Reinforcements For Low Ductility Classes
SCIENTIFIC WORLD JOURNAL Publication In Scopus CO-AUTHOR |
2014 |
Experimental And Analytical Study Of Various Shear Connectors Used For
Cold-Formed Steel-Ferrocement Composite Beam
3RD INTERNATIONAL CONFERENCE ON ADVANCED MATERIAL ENGINEERING & TECHNOLOGY (ICAMET 2014) Conference Paper CORRESPONDING AUTHOR |
2014 |
Analytical Study Of End-Plate Connection On Cruciform Column Section
GEOCON 2013-Persada Johor International Convention Centre, Johor Bahru, Johor, Malaysia Conference Paper CO-AUTHOR |
2013 |
Push-Out Tests For Determining Shear Strength And Stiffness Of Connectors Between Cold-Formed And Ferrocement Jacket
THE 9 TH INTERNATIONAL CONFERENCE OF GEOTECHNICAL & TRANSPORTA TION ENGINEERING (GEOTROPIKA) AND THE 1 ST INTERNATIONAL CONFERENCE ON CONSTRUCTION AND BUILDING ENGINEERING (ICONBUILD) – GEOCON2013 Conference Paper CORRESPONDING AUTHOR |
2013 |
Numerical Investigation On Roof Truss With Cold-Formed Steel Sections
THE INTERNATIONAL CONFERENCE ON SUSTAINABLE BUILT ENVIRONMENT FOR NOW AND THE FUTURE Conference Paper CO-AUTHOR |
2013 |
Properties Of Microfine Cement Grouts At 4 Degrees C, 10 Degrees C And 20 Degrees C
CONSTRUCTION AND BUILDING MATERIALS Publication In Web Of Science UTM FIRST AUTHOR |
2013 |
In Situ Performance Of Field-Moulded Joint Sealants In Dams
CONSTRUCTION AND BUILDING MATERIALS Publication In Web Of Science UTM FIRST AUTHOR |
2013 |
Sulfuric Acid Resistance Of Blended Ash Geopolymer Concrete
CONSTRUCTION AND BUILDING MATERIALS Publication In Web Of Science CO-AUTHOR |
2013 |
Numerical Modelling Of Stiffness And Strength Behaviour Of Top-Seat Flange-Cleat Connection For Cold-Formed Double Channel Section
APPLIED MECHANICS AND MATERIALS Publication In Scopus CO-AUTHOR |
2013 |
Properties Of Porous Concrete From Waste Crushed Concrete (Recycled Aggregate)
Construction and Building Materials Publication In Web Of Science CO-AUTHOR |
2013 |
A Review On Steel/Cfrp Strengthening Systems Focusing Environmental Performance
CONSTRUCTION AND BUILDING MATERIALS Publication In Web Of Science CO-AUTHOR |
2013 |
Towards Light-Weight Composite Construction: Innovative Shear Connector For Composite Beams
APPLIED MECHANICS AND MATERIALS Publication In Scopus UTM FIRST AUTHOR |
2013 |
Experimental Investigation Of Retrofitted Extended End-Plate Connections
APPLIED MECHANICS AND MATERIALS Publication In Scopus CO-AUTHOR |
2013 |
Effective Steel Area Of Fully Embedded Cold-Formed Steel Frame In Composite Slab System Under Pure Bending
APPLIED MECHANICS AND MATERIALS Publication In Scopus CO-AUTHOR |
2013 |
Numerical Simulation Of Cold-Formed Steel Top-Seat Flange Cleat Connection
JURNAL TEKNOLOGI (SCIENCES AND ENGINEERING) Publication In Scopus CO-AUTHOR |
2013 |
Feasibility Of Developing Composite Action Between Concrete And Cold-Formed Steel Beam
Journal of Central South University Publication In Web Of Science CORRESPONDING AUTHOR |
2013 |
Numerical Modelling Of Top-Seat Flange-Cleat
Connection In Light Steel Framing
8TH ASIA PACIFIC STRUCTURAL ENGINEERING AND CONSTRUCTION CONFERENCE (APSEC) AND 1ST INTERNATIONAL CONFERENCE ON CIVIL ENGINEERING RESEARCH (ICCER) Conference Paper CO-AUTHOR |
2012 |
Strength And Initial Stiffness Of Extended End-Plate
Connection Based On The Component Model
8TH ASIA PACIFIC STRUCTURAL ENGINEERING AND CONSTRUCTION CONFERENCE (APSEC 2012) Conference Paper CO-AUTHOR |
2012 |
Finite Element Models For Blind-Bolted End-Plate Connection On Structural Hollow Section
8TH ASIA PACIFIC STRUCTURAL ENGINEERING AND CONSTRUCTION CONFERENCE (APSEC 2012) Conference Paper CO-AUTHOR |
2012 |
Experimental Investigation On Wide-Span Cold-Formed Steel Roof Truss System
APPLIED MECHANICS AND MATERIALS Publication In Web Of Science CO-AUTHOR |
2012 |
Numerical Modelling And Validation Of Light Gauge Steel Top-Seat Flange-Cleat Connection
JOURNAL OF VIBROENGINEERING Publication In Web Of Science CO-AUTHOR |
2012 |
Experimental Evaluation Of Flush End-Plate Connection With Built-Up Hybrid Beam Section
ADVANCES IN STRUCTURAL ENGINEERING Publication In Web Of Science CORRESPONDING AUTHOR |
2012 |
Comparative Analysis Of Seismic Behavior Of V-Braced Frames And Suspended Zipper-Braced Frames
ADVANCED SCIENCE LETTERS Publication In Scopus CORRESPONDING AUTHOR |
2012 |
Optimization Of Cold-Formed Channel Sections Using Imperialist Competitive Algorithm
APPLIED MECHANICS AND MATERIALS Publication In Web Of Science CO-AUTHOR |
2012 |
Mapping Of Full-Field Bond Stress Distribution On Concrete Using Digital Image Correlation Results
JOURNAL OF APPLIED SCIENCES Publication In Scopus CO-AUTHOR |
2012 |
Flexural Performance Of Laminated Composite Plates With Diagonally Perturbed Localized Delamination
ADVANCED SCIENCE LETTERS Publication In Scopus CO-AUTHOR |
2012 |
Experimental Investigation On Locally Produced Cold-Formed Steel Sections For Roof Truss System
ADVANCED SCIENCE LETTERS Publication In Scopus CO-AUTHOR |
2012 |
Structural Behaviour Of Combined Flange-Cleat And Gusset Plate Connection For Cold-Formed Steel Double Channel Sections
ADVANCED SCIENCE LETTERS Publication In Scopus CO-AUTHOR |
2012 |
Microbiologically Influenced Corrosion Of X-70 Carbon Steel By Desulfovibrio Vulgaris
ADVANCED SCIENCE LETTERS Publication In Scopus CO-AUTHOR |
2012 |
Experimental Tests On Composite Beam With Various Slab Systems
APPLIED MECHANICS AND MATERIALS Publication In Web Of Science UTM FIRST AUTHOR |
2012 |
Experimental Investigation On Sub-Assemblage Frame With Cruciform Column Section
THE 6TH INTERNATIONAL SYMPOSIUM ON STEEL STRUCTURES (ISSS 2011) Conference Paper CO-AUTHOR |
2011 |
Experimental Investigation On Slip-In Connection For Cold-Formed Steel Double Channel Sections
ADVANCED MATERIALS RESEARCH Publication In Web Of Science CO-AUTHOR |
2011 |
Behaviour Of Composite Beam With Trapezoid Web Profiled Steel Section In Sub-Assemblage Frame
ADVANCED MATERIALS RESEARCH Publication In Web Of Science UTM FIRST AUTHOR |
2011 |
Experimental Investigation Of End-Plate Connection With Cruciform Column Section
ADVANCED MATERIALS RESEARCH Publication In Web Of Science CO-AUTHOR |
2011 |
Experimental Investigation On Bolted Angle Connections For Cold-Formed Steel Sections
ADVANCES IN STEEL AND ALUMINIUM STRUCTURES Publication In Web Of Science CO-AUTHOR |
2011 |
Finite Element Analysis Of Flush End-Plate Connections Connected To Column Web
INTERNATIONAL JOURNAL OF STEEL STRUCTURES Publication In Web Of Science CORRESPONDING AUTHOR |
2011 |
Limiting The Sway On Multi-Storey Un-Braced Steel Frames Bending On Weak Axis With Partial Strength Connections
STRUCTURAL ENGINEERING AND MECHANICS Publication In Web Of Science CORRESPONDING AUTHOR |
2011 |
Experimental Investigation Of Flush End-Plate
Connection Connected To Column Web
ADVANCES IN STEEL AND ALUMINIUM STRUCTURES Publication In Web Of Science UTM FIRST AUTHOR |
2011 |
Experimental Investigation On Full-Scale Sub-Assemblage Frame
ADVANCES IN STEEL AND ALUMINIUM STRUCTURES Publication In Web Of Science CO-AUTHOR |
2011 |
Maximum Local Thermal Effects Carpet Plot For Symmetric Laminated Composite Plates
ADVANCED MATERIALS RESEARCH Publication In Web Of Science CO-AUTHOR |
2011 |
STEELWORK DESIGN GUIDE TO BS 5950-1: 2000 Book (Text) INDIVIDUAL AUTHOR |
2010 |
Construction And Building Materials
Experimental Investigation of Short Cruciform Columns Using Universal Beam Sections Journal Article Non Citation-Indexed CORRESPONDING AUTHOR |
2009 |
Thin-Walled Structures
Performance of Pad Footing with Cold-Formed Lipped C-Channel Steel Section as Permanent Form-Work Journal Article Non Citation-Indexed CORRESPONDING AUTHOR |
2009 |
Composites Science & Technology
Experimental Tests On Pad Footing With Cold-Formed Lipped C-Channel Steel Section Journal Article Non Citation-Indexed CORRESPONDING AUTHOR |
2009 |
Construction And Building Materials
Experimental Tests on Composite Beam with Trapezoid Web Profiled Steel Sections Journal Article Non Citation-Indexed CORRESPONDING AUTHOR |
2009 |
-
STEELWORK DESIGN GUIDE TO BS 5950-1: 2000 Book (Text) CORRESPONDING AUTHOR |
2009 |
Journal Of Constructional Steel Research
Wind-Moment Design of Semi-Rigid Un-braced Steel Frames using Cruciform Column (CCUB) Sections Journal Article Non Citation-Indexed CO-AUTHOR |
2009 |
International Journal Of Steel And Composite Structures
Standardization of Partial Stength Composite Connections for TWP sections. Journal Article Non Citation-Indexed CORRESPONDING AUTHOR |
2009 |
International Journal Of Steel Structures,
Comparison of Component Method with Experimental Tests for Flush End-Plate Connections using Hot-Rolled Perwaja Steel Sections Journal Article Non Citation-Indexed CORRESPONDING AUTHOR |
2009 |
Push-Off Tests On Pin-Connected Shear Studs With Composite Steel-Concrete Beams
CONSTRUCTION AND BUILDING MATERIALS Publication In Web Of Science CORRESPONDING AUTHOR |
2009 |
Engineering Structures
Experimental Investigation of Flush End-Plate Connection Connected To Column Web Journal Article Non Citation-Indexed CORRESPONDING AUTHOR |
2009 |
Experimental Tests On Composite And Non-Composite Connections Using Trapezoid Web Profiled Steel Sections
International Journal of Steel Structures Publication In Scopus INDIVIDUAL AUTHOR |
2008 |
Standardisation Of Partion Partial Strength Connections Of Extended Emd-Plate Connections For Trapezoid Web Profiled Steel Sections
Malaysian Consructions Research Journal Journal Article Non Citation-Indexed INDIVIDUAL AUTHOR |
2008 |
Experimental Test On Beam To Column Of Partial Strength Composite Connections Using Trapezoid Web Profiled Steel Sections
1st Construction Industry Research Achievement International Conference (CIRAIC 2007) Conference Paper INDIVIDUAL AUTHOR |
2007 |
Economic Aspects Of Partial Strength Connection In The Design Of Braced Steel Frame Using Trapezoidal Web Profiled Steel Sections
Prosiding Kebangsaan Awam'07 Conference Paper INDIVIDUAL AUTHOR |
2007 |
Comparison Of Partial Strength Connection Between Extended And Flush End-Plate Connections With Trapezoid Web Profilled Steel Sections
1st Construction Industry Research Achievement International Conference (CIRAIC 2007) Conference Paper INDIVIDUAL AUTHOR |
2007 |
Ultimated Axial Load Of Cruciform Column Using Universal Beam Section
Prosiding Kebangsaan Awam'07 Conference Paper INDIVIDUAL AUTHOR |
2007 |
Finite Element Analysis On Th Estrength Of Flush Endplate Connection With Trapezoid Web Profile Beam Using Lusas Software
National Seminar on Civil Engineering Research (SEPKA 2007) Conference Paper INDIVIDUAL AUTHOR |
2007 |
Legend : IP CATEGORY IP LEVEL
Legend : SESSION LEVEL OF STUDY STATUS SUPERVISION LEVEL
Supervision List |
---|
ASHRAF MOHAMED MOSTAFA SHEHATA FINITE ELEMENT MODELLING OF STEEL FRAMES UNDER FIRE PHD ON GOING SUPERVISOR |
ARIZU BIN SULAIMAN BEHAVIOUR OF PARTIAL STRENGHT CONNECTIONS WITH TRAPEZOID WEB PROFILED STEEL SECTIONS PHD GRADUATED SUPERVISOR 2006 |
ANIS BEHAVIOUR OF COMPOSITE PARTIAL STRENGHT CONNECTIONS WITH TRAPEZOID WEB PROFILED STEEL SECTION PHD GRADUATED SUPERVISOR 2007 |
SHEK POI NGIAN STRUCTURAL BEHAVIOUR OF BUILT - UP STEEL SECTIONS USING PARTIAL STRENGTH CONNECTION PHD GRADUATED SUPERVISOR 2009 |
TAN CHER SIANG BEHAVIOUR OF PIN AND PARTIAL STRENGTH BEAM-TO-COLUMN CONNECTIONS WITH DOUBLE CHANNEL COLD-FORMED STEEL SECTIONS PHD GRADUATED SUPERVISOR 2009 |
SALEH OMAR AHMED BAMAGA STRUCTURAL BEHAVIOUR OF COMPOSITE BEAMS WITH COLD FORMED STEEL SECTION PHD GRADUATED SUPERVISOR 2013 |
BEHZAD BAYAT SEISMIC PERFORMANCE OF INNOVATIVE DOUBLE LAYER SPACE SHEAR WALL PHD GRADUATED CO-SUPERVISOR 2014 |
ELNAZ TALEBI THE BEHAVIOUR OF BUCKLING RESTRAINED BRACE SYSTEM AT ELEVATED TEMPERATURE PHD GRADUATED SUPERVISOR 2014 |
LEE YEONG HUEI PERFORMANCE OF LIGHT STEEL FRAMING WITH BOLTED TOP-SEAT FLANGE CLEAT CONNECTION PHD GRADUATED CO-SUPERVISOR 2014 |
TALAL M H F ALHAJRI STRUCTURAL BEHAVIOUR OF AN INNOVATIVE PRECAST COLD-FORMED STEEL FERROCEMENT AS COMPOSITE BEAM PHD GRADUATED SUPERVISOR 2014 |
KHALED KH D SH O ALENEZI BEHAVIOUR OF COLD-FORMED LIPPED C-CHANNEL WITH FERROCEMENT JACKET COMPOSITE COLUMN UNDER AXIAL COMPRESSION PHD GRADUATED SUPERVISOR 2015 |
AHMAD NUR FAIDHI BIN RIZALMAN NUMERICAL SIMULATION OF AXIALLY LOADED CONCRETE FILLED HOLLOW STEEL SECTION COLUMNS AT ELEVATED TEMPERATURES PHD GRADUATED SUPERVISOR 2015 |
MUSTAPHA MUHAMMAD LAWAN STRUCTURAL PERFORMANCE OF COLD-FORMED STEEL WITH SELF-COMPACTING CONCRETE IN A COMPOSITE BEAM SYSTEM PHD GRADUATED SUPERVISOR 2015 |
MOHD SYAHRUL HISYAM BIN MOHD SANI PERFORMANCE OF CUT-CURVED COLD-FORMED STEEL CHANNEL SECTIONS FOR ROOF TRUSS SYSTEM PHD GRADUATED CO-SUPERVISOR 2018 |
REZA AGHLARA AN INNOVATIVE PASSIVE METALLIC DAMPER WITH REPLACEABLE COMPONENTS FOR EARTHQUAKE PROTECTION OF STRUCTURES PHD GRADUATED SUPERVISOR 2018 |
TAN BOON CHEIK STRUCTURAL BEHAVIOUR OF END-PLATE CONNECTIONS ON HYBRID BEAM TO CRUCIFORM COLUMN SECTION PHD GRADUATED CO-SUPERVISOR 2019 |
NOR MASLINA BINTI MOHSAN STRUCTURAL BEHAVIOUR OF CONCRETE FILLED COLD-FORMED STEEL CHANNEL WALL PANEL UNDER AXIAL LOADING PHD GRADUATED CO-SUPERVISOR 2019 |
MUSAB NIMIR ALI SALIH BEHAVIOUR OF COLD-FORMED COMPOSITE BEAM WITH BENT-UP BAR AS SHEAR CONNECTOR ENCASED WITH SELF-COMPACTING CONCRETE PHD GRADUATED SUPERVISOR 2020 |
KHADAVI PHD GRADUATED SUPERVISOR 2021 |
ELFI PENGGUNAAN SISTEM BATA BERONGGA BERSILANGKAIT BAGI MENGATASI KELEWATAN PEMBINAAN BANGUNAN DI KEPULAUAN MENTAWAI PHD GRADUATED SUPERVISOR 2022 |
FADHLUHARTINI BINTI HJ MUFTAH STRUCTURAL BEHAVIOUR OF BUILT-UP COLD-FORMED STEEL COLUMN UNDER NORMAL TEMPERATURE AND STANDARD FIRE CONDITION. PHD GRADUATED CO-SUPERVISOR 2022 |
ZELMI SRIYOLJA  KERANGKA KERJA KONSULTAN PERANCANGAN PEMBINAAN UNTUK IMPLEMENTASI BUILDING INFORMATION MODELLING DI INDONESIA    PHD ON GOING CO-SUPERVISOR |
NORWATI BINTI JAMALUDDIN MASTER ON GOING SUPERVISOR |
AIRIL YASREEN B. MOHD YASSIN MASTER ON GOING SUPERVISOR |
LOO CHANG SOON MASTER GRADUATED SUPERVISOR 2009 |
WONG KAH LEONG STRUCTURAL BEHAVIOUR OF PRE-FABRICATED COMPOSITE PAD FOOTING FOUNDATION USING COLD-FORMED STEEL LIPPED CHANNEL SECTIONS MASTER GRADUATED SUPERVISOR 2010 |
SALEH OMAR AHMED BAMAGA MASTER GRADUATED SUPERVISOR 2010 |
SASAN PARNIANI MASTER GRADUATED CO-SUPERVISOR 2010 |
MOHD HAIRIL BIN MOHD FINITE ELEMENT FORMULATION FOR SEMI-RIGID BEAM-TO-COLUMN CONNECTIONS USING POTENTIAL ENERGY APPROACH MASTER GRADUATED SUPERVISOR 2011 |
EMAD HOSSEIN POUR MASTER GRADUATED SUPERVISOR 2012 |
MAHAMAT TIDJANI ADAM MASTER GRADUATED SUPERVISOR 2013 |
ABUBAKAR SHARIF AUWALU THE PERFORMANCE AND THE BEHAVIOUR OF STILL BOLT CONNECTED IBS COMPONENTS SUBJECTED TO SUDDEN IMPACT OF HYDRODYNAMIC FORCE WITH DEBRIS MASTER GRADUATED SUPERVISOR 2013 |
ALI SALEH HUSSAIN HUSSAIN MASTER GRADUATED SUPERVISOR 2014 |
MOHD NOH BIN RAMAN MASTER GRADUATED SUPERVISOR 2014 |
TAHER YASEEN TAHER MASTER GRADUATED SUPERVISOR 2015 |
GAN HONG WEI ECONOMIC AND STRUCTURAL PERFORMANCE OF CRUCIFORM COLUMN SECTION WITH END-PLATE CONNECTION. MASTER GRADUATED CO-SUPERVISOR 2015 |
TEE CHIN WEE BEHAVIOUR OF AN INNOVATIVE CONNECTION USED IN STEEL STORAGE RACKING SYSTEMS MASTER GRADUATED SUPERVISOR 2015 |
LOW JUN XIU MASTER GRADUATED CO-SUPERVISOR 2016 |
KOO TING CHOONG MASTER GRADUATED SUPERVISOR 2017 |