GRANT(PI & MEMBERS)

23

PUBLICATIONS

40

INDEXED PUBLICATION

21

TOTAL STUDENTS

H-INDEXED (SCOPUS)

CITATIONS (SCOPUS)

Grant (PI)

INDUSTRY GRANTS
1
NATIONAL GRANTS
2
UNIVERSITY FUND
1
TOTAL

Publications

INDEXED PUBLICATION
21
NON-INDEXED PUBLICATION
1
OTHERS PUBLICATION
18
TOTAL

Supervisions

MASTER
6
PHD
2
TOTAL

Legend : SPONSOR TYPE OF GRANT

Grant Name Year
Data-driven Fault Diagnosis and Vibration Analysis on a Low-Cost Semi-Automated Prototype of a Solar Frame Production System at PMB Aluminium Sdn. Bhd.
TOP GLOVE INTERNATIONAL SDN BHD Contract Research DTD
2024
Fighter Aircraft Fatigue of Critical Location For Structure Life Extension
RUG OF UTM UTM Fundamental Research
2022
Predicting Spatial Displacement Based on Intraocular Lens, Convolution Neural Network, Machine Learning
UNIVERSITI ISLAM ANTARABANGSA MALAYSIA Networking Grant
2020
IMPROVEMENT OF MODE SHAPE CURVATURE ALGORITHM USING ROBUST REGRESSION FOR DAMAGE DETECTION IN LAMINATED COMPOSITE
MINISTRY OF EDUCATION Fundamental Research Grant Scheme
2019
A Modified Gapped Smoothing Method for Detecting Horizontal and Vertical Crack
RUG OF UTM Tier 2
2017
RISK ASSESSMENT FRAMEWORKS OF HANDLING AND STORAGE OF CARGO AT MALAYSIA PORTS.
RUG OF UTM Tier 1
2017
Cloud Optical Depth Retrieval via Infrared Radiation Analysis for Solar Radiation Prediction
TAKASAGO THERMAL ENGINEERING CO., LTD JAPAN International Grant
2016
CLOSURE EFFECT OF WELDING RESIDUAL STRESS IN PENETRATION NOZZLES OF PRESSURE VESSEL
RUG OF UTM Tier 1
2016
Control of Narrow-Band Low Frequency Noise on Engine Intake in Automobile Cabin using Active Noise Cancellation
RUG OF UTM Tier 1
2015
AN IMPROVED ENERGY BASED LOAD-DISPLACEMENT PREDICTION FOR A SLOTTED DISC SPRING
MINISTRY OF EDUCATION Fundamental Research Grant Scheme
2014

Legend : PUBLICATION CATEGORY TYPE OF AUTHORS

Publication Name Year
Damage Detection In A Free-Free Beam Structure Using Reconstructed Mode Shape Data: Numerical Approach
AIP CONFERENCE PROCEEDINGS
Publication In Scopus FIRST UTM CORRESPONDING AUTHOR
2023
The Performance Degradation Of A Dried Vacuum Pump Utilizing Statistical Time Domain Parameters And Stft Vibration Signal Monitoring
AIP CONFERENCE PROCEEDINGS
Publication In Scopus FIRST UTM CORRESPONDING AUTHOR
2023
Wavelet Based Semblance Analysis For Vibration Signal Monitoring Of A Dried Vacuum Pump
AIP CONFERENCE PROCEEDINGS
Publication In Scopus FIRST UTM CORRESPONDING AUTHOR
2023
Damage Detection In A Free-Free Beam Structure Using Reconstructed Mode Shape Data: Experimental Approach
AIP CONFERENCE PROCEEDING
Publication In Scopus FIRST UTM CORRESPONDING AUTHOR
2023
Simple And Fast Damage Identification On 6061 Aluminium Based On Mode Shape Curvature
JOURNAL OF ENGINEERING SCIENCE AND TECHNOLOGY (JESTEC)
Publication In Web Of Science UTM FIRST AUTHOR
2022
Navigating Our Way Through A Pandemic: Experimenting With Alternative Forms Of Delivery (Padlet)
PROCEEDING OF NEW ACADEMIA LEARNING INNOVATION (NALI) 2021 EXHIBITION & COMPETITION
Proceedings INDIVIDUAL AUTHOR
2021
Predicting Spatial Displacement Based On Intraocular Image Design Using Convolution Neural Network –Preliminary Findings
JOURNAL OF INFORMATION SYSTEMS AND DIGITAL TECHNOLOGIES
Journal Article Non Citation-Indexed UTM FIRST AUTHOR
2021
Effect On Corporate Strategy, Performance, And Survival
RISING ABOVE CRISIS IN TURBULENCE TIMES - HOW TO BE RESILIENT AND AGILE WHEN CRISIS HITS
Book Chapter INDIVIDUAL AUTHOR
2021
Leadership And Innovation :Conceptual Paper
Proceeding of Leadership Symposium
Proceedings INDIVIDUAL AUTHOR
2020

TECHNICAL REPORT MYIOL-TR04 FINITE ELEMENT ANALYSIS MODEL #4
Clasified/Technical Report UTM FIRST AUTHOR
2020

TECHNICAL REPORT MYIOL-TR02 FINITE ELEMENT ANALYSIS MODEL #1
Clasified/Technical Report UTM FIRST AUTHOR
2020

TECHNICAL REPORT MYIOL-TR01 IOL MATERIAL IDENTIFICATION
Clasified/Technical Report UTM FIRST AUTHOR
2020

TECHNICAL REPORT MYIOL-TR03 FINITE ELEMENT ANALYSIS MODEL #2
Clasified/Technical Report UTM FIRST AUTHOR
2020
Evaluation Of Improved Mode Shape Curvature Based Damage Detection Using Robust Regression Method
THE 2ND INTERNATIONAL CONFERENCE ON INNOVATIVE TECHNOLOGY, ENGINEERING AND SCIENCES 2020
Conference Paper UTM FIRST AUTHOR
2020
Computational Simulation: An Additional Element For Open Ended Mechanical Engineering Laboratory In The Era Of Covid-19
PROCEEDING OF NEW ACADEMIA LEARNING INNOVATION (NALI) 2020 SYMPOSIUM
Proceedings CORRESPONDING AUTHOR
2020
The Whirling Frequency Of High Speed Shaft With Torsional Effect
INTERNATIONAL JOURNAL OF RECENT TECHNOLOGY AND ENGINEERING
Publication In Scopus CO-AUTHOR
2019
Effect Of Inclusion Lagrange Interpolation Method In Mode Shape Curvature Based Damage Detection
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING
Publication In Scopus UTM FIRST AUTHOR
2019
Design Optimization Of A Rotating Flywheel Under High Centrifugal Forces Using Response Surface Method
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING
Publication In Scopus CORRESPONDING AUTHOR
2019
Effect Of Inclusion Lagrange Interpolation Method In Mode Shape Curvature Based Damage Detection
1ST INTERNATIONAL POSTGRADUATE CONFERENCE ON MECHANICAL ENGINEERING 2018
Conference Paper CORRESPONDING AUTHOR
2018
Effects Of Parameters Of Helmholtz Resonator On Transmission Loss Of Hybrid Muffler
INTERNATIONAL JOURNAL OF ENGINEERING AND TECHNOLOGY(UAE)
Publication In Scopus CO-AUTHOR
2018
Dynamic Instability Of High-Speed Rotating Shaft With Torsional Effect
INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL
Publication In Scopus CO-AUTHOR
2018
The Whirling Frequency Of High-Speed Shaft With Torsional Effect
4TH INTERNATIONAL CONFERENCE ON MECHANICAL, AUTOMOTIVE, AND AEROSPACE ENGINEERING 2018 (ICMAAE’18)
Conference Paper CO-AUTHOR
2018
Damage Detection Using Laplacian Operator On Interpolated Mode Shape Curvature
ARPN Journal of Engineering and Applied Sciences
Publication In Scopus CORRESPONDING AUTHOR
2018
Design Optimization Of A Rotating Flywheel Under High Centrifugal Forces Using Response Surface Method
5TH INTERNATIONAL CONFERENCE ON ADVANCED ENGINEERING AND TECHNOLOGY 2018 (5 TH ICAET 2018)
Conference Paper CORRESPONDING AUTHOR
2018
The Effect Of Changing Disk Parameters On Whirling Frequency Of High Speed Rotor System
IOP CONFERENCE SERIES PROCEEDING
Publication In Scopus CO-AUTHOR
2017
Parametric Instability Of Shaft With Discs
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING
Publication In Scopus CO-AUTHOR
2017
Effect Of Different Automobile Cabin Geometry To Acoustic Cavity Mode Analysis
ADVANCED SCIENCE LETTERS
Publication In Scopus CO-AUTHOR
2017
Damage Identification Based On Curvature Mode Shape Using Cubic Polynomial Regression And Chebyshev Filters
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING
Publication In Scopus UTM FIRST AUTHOR
2017
Improvement On Ride Comfort Of Quarter-Car Active Suspension System Using Linear Quadratic Regulator
SECOND INTERNATIONAL CONFERENCE ON THE FUTURE OF ASEAN (ICOFA 2017)
Conference Paper CO-AUTHOR
2017
Enhancing Vehicle Ride Comfort Through Intelligent Based Control
PROCEEDINGS - 2016 IEEE INTERNATIONAL CONFERENCE ON AUTOMATIC CONTROL AND INTELLIGENT SYSTEMS, I2CACIS 2016
Publication In Web Of Science CO-AUTHOR
2017
Parametric Instability Of Shafts Based On The Nelsonã¢Â€Â™S Beam Model Using Finite Element Method
ADVANCED SCIENCES LETTERS
Publication In Scopus CO-AUTHOR
2017
An Improved Load-Displacement Prediction For A Coned Disc Spring Using The Energy Method
ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES
Publication In Scopus CORRESPONDING AUTHOR
2016
An Improved Load-Displacement Prediction For A Coned Disc Spring Using The Engergy Method
ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES
Publication In Scopus CORRESPONDING AUTHOR
2016
Effects Of Inlet And Outlet Extensions On Transmission Loss Of An Expansion Chamber Muffler By Transfer Matrix Method
THE SEVENTH INTERNATIONAL CONFERENCE ON SCIENCE AND ENGINEERING 2016
Conference Paper CO-AUTHOR
2016
An Improved Energy Based Load-Displacement Prediction For Slotted Disc Spring
ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES
Publication In Scopus CORRESPONDING AUTHOR
2016
An Improved Energy Based Load-Displacement Prediction For Slotted Disc Spring
THE 2ND INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING “ ICOME 2015
Conference Paper CORRESPONDING AUTHOR
2015
An Improved Load-Displacement Prediction For A Coned Disc Spring Using The Energy Method
THE 2ND INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING – ICOME 2015
Conference Paper CORRESPONDING AUTHOR
2015
Dynamic Stability Of Shaft Interconnected Through Joint: A Review
ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES
Publication In Scopus CO-AUTHOR
2015
A Modified Load-Displacement Prediction For A Coned Disc Spring
HONG KONG INTERNATIONAL CONFERENCE ON ENGINEERING AND APPLIED SCIENCE
Conference Paper CORRESPONDING AUTHOR
2014
Sensitive Design Parameters For A Slotted Disc Spring Design
HONG KONG INTERNATIONAL CONFERENCE ON ENGINEERING AND APPLIED SCIENCE
Proceedings UTM FIRST AUTHOR
2014

Legend : IP CATEGORY IP LEVEL

Intellectual Property Name Grant Register No. IP Level IP Category
IMPROVEMENT OF MODE SHAPE CURVATURE ALGORITHM USING ROBUST REGRESSION FOR DAMAGE DETECTION IN STRUCTURE NATIONAL COPYRIGHT

Legend : SESSION LEVEL OF STUDY STATUS SUPERVISION LEVEL

Supervision List
ABDUL MALEK BIN ABDUL WAHAB
PARAMETRIC INSTABILITY ANALYSIS WITH TORSIONAL EFFECTS OF ROTATING SHAFT SYSTEM
PHD GRADUATED CO-SUPERVISOR 2017
MOHD HASRIZAM BIN CHE MAN
VIBRATION BASED DAMAGE DETECTION IN LAMINATED COMPOSITES
PHD ON GOING SUPERVISOR
RAJA MOHD KAMAL B. RAJA ZULKIFLI

MASTER GRADUATED CO-SUPERVISOR 2013
WAN MARIANA BINTI WAN LAH

MASTER GRADUATED CO-SUPERVISOR 2014
EDY HERMANTO JANIUS

MASTER GRADUATED CO-SUPERVISOR 2014
ZETTY ROHAIZA BINTI MOHD SAHAK @ ISHAK
VIBRATION SENSITIVITY ANALYSIS OF CRANKSHAFT
MASTER GRADUATED CO-SUPERVISOR 2016
THIHA ZAW
ACOUSTIC ANALYSIS OF HYBRID MUFFLER CONTAINING SIMPLE EXPANSION CHAMBERS AND HELMHOLTZ RESONATOR
MASTER GRADUATED CO-SUPERVISOR 2018