GRANT(PI & MEMBERS)
55
PUBLICATIONS
64
INDEXED PUBLICATION
30
TOTAL STUDENTS
H-INDEXED (SCOPUS)
CITATIONS (SCOPUS)
Grant (PI)
INTERNATIONAL GRANTS
1
NATIONAL GRANTS
6
UNIVERSITY FUND
5
TOTAL
Publications
INDEXED PUBLICATION
30
NON-INDEXED PUBLICATION
7
OTHERS PUBLICATION
27
TOTAL
Supervisions
MASTER
19
PHD
10
TOTAL
Legend : SPONSOR TYPE OF GRANT
| Grant Name | Year |
|---|---|
| PET3.4 Low porosity chemically bonded ceramic coating for corrosion protection application PETRONAS RESEARCH SDN. BHD. Contract |
2024 |
| MG2-56.0 : Microwave plasma irradiation on graphite and activated carbon for energy storage Hasanuddin University International Grant |
2024 |
| MG2-56.1 : Microwave-Assisted Synthesis of Nickel Sulfide/Activated Carbon Nanocomposites for Enhanced Performance in For Energy Storage RUG OF UTM Matching Grant |
2024 |
| Effects of PLGA-MgO addition on Fe corrosion for potential biodegradable bone implants. NIPPON SHEET GLASS International Grant |
2024 |
| High-Temperature Stability of Nanostructured Transition-Metal-Based/rGO Counter Electrode in Quantum Dot Sensitized Solar Cells (QDSSCs) RUG OF UTM UTM Fundamental Research |
2023 |
| Design and Development of in Situ Automatic Water Quality Monitoring System: A Data Validation and Fault Detection KURITA WATER AND ENVIRONMENT FOUNDATION International Grant |
2023 |
| SATREPS 2023: 1.1 - Biogas Production from POME: Synthesis, Upgrading and Energy Conversion Studies MINISTRY OF EDUCATION Long Term Research Grant Scheme |
2023 |
| MICROSTRUCTURAL AND CORROSION EFFECTS OF YSZ/MULLITE FUNCTIONAL GRADED-THERMAL BARRIER COATING DEPOSITED VIA SLURRY DEPOSITION METHOD KISWIRE SDN. BHD. Contract |
2023 |
| Effect of Praseodymium Intermetallic Compound and Hot Extrusion on the Alteration of Mg2Si Particles in Strengthening Al-15%Mg2Si Insitu Composite MINISTRY OF EDUCATION Fundamental Research Grant Scheme |
2022 |
| 3D printed electrodes for electrocatalytic hydrogen evolution reaction RUG OF UTM UTM Encouragement Research |
2021 |
| Mechanical properties and thermal degradation study of polyvinyl chloride (PVC)/nanoclay composites sheath for steel wire ropes RUG OF UTM UTM R&D Fund |
2021 |
| CEP Future Energy (Collaborative Education program on Biomass and Solar Renewable Energy System – The Future Energy for ASEAN Region) JAPAN INTERNATIONAL COOPERATION AGENCY (JICA) International Grant |
2021 |
| DIRECT LIGHT PROCESSING 3D/4D PRINTING OF MICROCAPSULE-BASED SELF-HEALING UV-CURABLE EPOXY RUG OF UTM UTM Encouragement Research |
2020 |
| UTMIcon 1.3: Characterization of Functionally Graded Alloy (FGA) RUG OF UTM UTM RA ICONIC GRANT |
2020 |
| Porous silica aerogel films as super-insulating adsorbent material for preservation of fresh water reservoir RUG OF UTM UTM Fundamental Research |
2020 |
| CRG 34.2 : SYNTHESIS OF THE POLY L-LACTIDE ACID (PLLA) AND NANOCELLULOSE/N-DOPED TIO2 AS A NOVEL POLYMERIC NANOCOMPOSITE BIOMATERIAL FOR BONE SCAFFOLD. UNIVERSITI MALAYSIA PAHANG Collaborative Research Grant National |
2019 |
| CRG 34.3: DEVELOPMENT OF DEGRADATION MATHEMATICAL MODEL FOR MECHANICAL RESPONSE PREDICTION IN NATURALLY SOURCED BIOMATERIALS 3D BONE SCAFFOLDS UNIVERSITI MALAYSIA PERLIS Collaborative Research Grant National |
2019 |
| CRG 34.4 : Life Cycle Assessment (LCA) of 3D Bone Tissue Engineering Scaffold UNIVERSITI TUN HUSSEIN ONN MALAYSIA Collaborative Research Grant National |
2019 |
| CRG 34.1 : Optimization of the Materials Composition and Process Parameters To Enhance Mechanical Properties of the Developed Tissue Engineering Scaffold and Cell Culture Study RUG OF UTM Collaborative Research Grant |
2019 |
| KTP-NMG 2019:PEMBANGUNAN PUSAT LATIHAN KAKISAN UTM-MACH3 RUG OF UTM Business Entity |
2019 |
| 4B355-FABRICATION AND DEVELOPMENT OF GRAPHENE FROM WASTE MATERIALS FOR SILICON-POLYMERS COMPOSITE CONDUCTIVE ELECTRODE. RUG OF UTM Industry-International Incentive Grant |
2019 |
| KTP-NMG 2019: AUTOMATION IN GARMENT MANUFACTURING TOWARDS INDUSTRIAL REVOLUTION (IR 4.0) AND STEM EDUCATION. RUG OF UTM Business Entity |
2019 |
| SYNTHESIS AND CHARACTERIZATION OF ORDERED STRUCTURE OF TRANSITION METAL-BASED NANOPARTICLES AND ITS CATALYTIC ACTIVITY ON DIRECT-BOROHYDRIDE FUEL CELLS (DBFCS) MINISTRY OF EDUCATION Fundamental Research Grant Scheme |
2019 |
| Functionalization of nitrogen and boron doped GRHA in polymer composite as the conductivemedical electrode MINISTRY OF EDUCATION Fundamental Research Grant Scheme |
2019 |
| Microstructural and corrosion investigation of GO/CNT nanostructured coating on porous Ti-30 at.%Ta shape memory alloys for biomedical application MINISTRY OF EDUCATION Fundamental Research Grant Scheme |
2019 |
| UTM-TDR 18.4 (T1) : Continuous Domains of Low Temperature Graphene Growth on transition metal catalysts. RUG OF UTM UTM Transdiciplinary Research Grant |
2018 |
| UTM-TDR 10.4 (T2) Optimization of Cold-Drawn Steel Wire Rope RUG OF UTM UTM Transdiciplinary Research Grant |
2018 |
| UTM-TDR 18.1 (T2): Energy Recovery and Power Generation from Variable Refrigerant Volume Unit by Convergent-Shrouded Wind Turbine Generator RUG OF UTM UTM Transdiciplinary Research Grant |
2018 |
| UTM-TDR 16.4 (T1): Highly flexible and conductive graphene/CNTs-polymer composite for medical electrode. RUG OF UTM UTM Transdiciplinary Research Grant |
2018 |
| UTM-TDR 10.5 (T1) High Wear and Corrosion Resistance Coatings onto Steel Wire Ropes for offshore applications RUG OF UTM UTM Transdiciplinary Research Grant |
2018 |
| UTM-TDR 10: NEW GENERATION MATERIALS WITH ULTRAHIGH PERFORMANCE FOR HIGH IMPACT INDUSTRIES RUG OF UTM UTM Transdiciplinary Research Grant |
2018 |
| BEHAVIOUR OF INTERMETALLIC COMPOUNDS FORMED BETWEEN COPPER INTERCONNECTION FILLER, NICKEL UNDERLAYER, AND SILICON WAFER FOR THROUGH-SILICON VIA (TSV) APPLICATION RUG OF UTM Tier 1 |
2018 |
| Fabrication and Development of Graphene from Waste Materials for Silicon-Polymers Composite Conductive Electrode. NIPPON SHEET GLASS International Grant |
2018 |
| CORRELATION BETWEEN SUPERELASTICITY AND DAMPING CAPACITY OF CU-AL-NI SHAPE MEMORY ALLOYS WITH FOURTH ALLOYING ELEMENTS MINISTRY OF EDUCATION Fundamental Research Grant Scheme |
2017 |
| THE KINETIC OF ZN-AL-MG COATING GROWTH ON ALLOY STEEL FOR OFFSHORE MOORING AND CRANE ROPE FACILITIES RUG OF UTM Tier 1 |
2017 |
| ELECTROSPUN ARAMIDE NANOFIBERS FILLED POLY-VINYL ALCOHOL FOR TISSUE ENGINEERING SCAFFOLD RUG OF UTM Tier 1 |
2017 |
| Development of Maerogel/Epoxy Composite For Sustainable Thermal Insulation Applications MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund |
2017 |
| REFLECTION OF ACOUSTIC WAVE IN REAL ATMOSPHERE FOR HYPERSONIC BOUNDARY LAYER CONTROL RUG OF UTM Tier 1 |
2016 |
| Fabrication of Ceramic Coated Turbocharger Turbine Volute Casing for Passenger Vehicle Turbocharged Engine MINISTRY OF EDUCATION Prototype Development Research Grant Scheme |
2016 |
| EFFECT OF CERAMIC PARTICLE ADDITION AND SUPERHEATING ON THE MORPHOLOGY AND MECHANICAL PROPERTIES OF ALUMINIUM HYBRID COMPOSITES RUG OF UTM Tier 1 |
2016 |
| SIMPLE CHEMICAL VAPOR DEPOSITION SETUP FOR GRAPHENE FABRICATION. RUG OF UTM Potential Academic Staff |
2015 |
| Mechanical and Thermal Performance of Maerogel-Based Insulation Layer For Polymeric Composite Materials RUG OF UTM Tier 1 |
2015 |
| Interfacial Reaction between Silicon wafer, Underlayers and Cu-Interconnection Filler of Through-Silicon Via (TSV) MINISTRY OF EDUCATION Fundamental Research Grant Scheme |
2014 |
| DEPOSITION OF CU INTERCONNECTION MATERIALS FOR THROUGH-SILICON VIAS (TSV) APPLICATION BY ELECTROLESS PLATING RUG OF UTM Encouragement Grant |
2014 |
| DEVELOPMENT OF ALUMINUM METAL MATRIX COMPOSITES BY IN SITU AND EX SITU FABRICATION PROCESSES RUG OF UTM Tier 1 |
2014 |
| Corrosion and Mechanical Properties Investigation of Nanostructured Composite Ceramics Coating on superalloys material for aerospace applications MINISTRY OF EDUCATION Fundamental Research Grant Scheme |
2013 |
| Damage Mechanics-Based Methodology for Reliability Assessment of Through-Silicon Via (TSV) Interconnects COLLABORATIVE RESEARCH IN ENGINEERING, SCIENCE & TECHNOLOGY CENTER (CREST) Non Goverment Agency |
2013 |
| ELECTRODEPOSITION OF INTERMETALLIC NICKEL ALUMINIDE NANOPARTICLES SYNTHESIS USING CHEMICHAL REDUCTION APPROACH RUG OF UTM Tier 1 |
2012 |
Legend : PUBLICATION CATEGORY TYPE OF AUTHORS
| Publication Name | Year |
|---|---|
|
The Effect Of Electrodeposition Voltage On The Morphology Of Ni Coated 3d Printed Pla/Carbon Electrode
AIP CONFERENCE PROCEEDINGS Publication In Scopus CO-AUTHOR |
2024 |
|
Mechanical Properties Of 3d-Printed Photopolymer Composites Modified With Solid-Wasted Coffee Bean Powder
AIP CONFERENCE PROCEEDINGS Publication In Scopus CO-AUTHOR |
2024 |
|
Corrosion Inhibition Of Musa Acuminata And Its Synergism Effect Of Halide Ions On Mild Steel In An Acidic Environment
AIP CONFERENCE PROCEEDINGS Publication In Scopus CO-AUTHOR |
2024 |
|
Harnessing Cross-Disciplinary Coaching: A Winning Formula For Utm In The Materials Lecture Competition
E-PROCEEDING OF NEW ACADEMIA LEARNING INNOVATION (NALI) 2024 Proceedings CO-AUTHOR |
2024 |
|
A Review Of Transition Metal Sulfides As Counter Electrodes For
Dye-Sensitized And Quantum Dot-Sensitized Solar Cells
MATERIALS Publication In Web Of Science FIRST UTM CORRESPONDING AUTHOR |
2023 |
|
Electrophoretic Deposition Of Nanohydroxyapatite On Homogenized
Magnesium-Based Alloy For Biomedical Applications
JOURNAL OF BIOMIMETICS, BIOMATERIALS AND BIOMEDICAL ENGINEERING Publication In Web Of Science CO-AUTHOR |
2023 |
|
Synthesis Techniques Of Bioceramic Hydroxyapatite For Biomedical
JOURNAL OF BIOMIMETICS, BIOMATERIALS AND BIOMEDICAL ENGINEERING Publication In Web Of Science CO-AUTHOR |
2023 |
|
Effect Of Homogenization Heat Treatment On The Microstructure Of Az91 Magnesium Alloy At Different Temperatures And Ageing Times
JOURNAL OF ENGINEERING RESEARCH Publication In Web Of Science CO-AUTHOR |
2023 |
|
The Effects Of Annealing On Microstructure And Tensile Properties Of Cold Drawn Steel Wire
MALAYSIAN JOURNAL OF MICROSCOPY Publication In Scopus FIRST UTM CORRESPONDING AUTHOR |
2023 |
|
Effect Of Stand-Off Distance On The Microstructural, Mechanical And Physical Properties Of Al-Zn Pseudo-Alloy Coating Prepared Via Wire Arc Spray Process
MALAYSIAN JOURNAL OF MICROSCOPY Publication In Scopus CO-AUTHOR |
2022 |
|
Characterizations Of High Entropy Alloy Powder As Catalyst Synthesized By Mechanical Alloying For Azo Dye Degradation
KEY ENGINEERING MATERIALS Publication In Scopus UTM FIRST AUTHOR |
2022 |
|
Fracture Energy For Orthogonal Cutting In Unidirectional Cfrp At Different Cutting Directions
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING Journal Article Non Citation-Indexed CO-AUTHOR |
2022 |
|
Synthesis And Characterization Of Nickel Boride Nanoparticles For Energy Conversion
Catalyst Materials –The Effect Of Annealing
Temperature
SUSTAINABLE & INTEGRATED ENGINEERING INTERNATIONAL CONFERENCE 2022 Conference Paper CORRESPONDING AUTHOR |
2022 |
|
Corrosion Behavior Of Al-Zn Pseudo Alloy Coatings Prepared Via
Twin Wire Arc Spray Process
9TH INTERNATIONAL GRADUATE CONFERENCE ON ENGINEERING, SCIENCE & HUMANITIES (IGCESH 2022) Proceedings CO-AUTHOR |
2022 |
|
Outlook On The Carbon-Based Materials For Heavy Metal Removal
BIOINTERFACE RESEARCH IN APPLIED CHEMISTRY Publication In Web Of Science CO-AUTHOR |
2022 |
|
Microstructure Examination And Sliding Wear Behavior Of Al-15%Mg2si-Xgd
In Situ Composites Before And After Hot Extrusion
LUBRICANTS Publication In Web Of Science CO-AUTHOR |
2022 |
|
Structural And Thermal Characteristics Of Ti6al4v (Ti64) Metal Powders For Direct Energy Deposition
MATERIALS TODAY: PROCEEDINGS Publication In Web Of Science UTM FIRST AUTHOR |
2022 |
|
Feasibility Study On Biomass Bamboo Renewable Energy In Malaysia, Indonesia, Vietnam And Japan
THE 7TH INTERNATIONAL CONFERENCE ON LOW CARBON ASIA AND BEYOND (ICLCA'21) Conference Paper CO-AUTHOR |
2021 |
|
Modelling And Control Analysis Of Bamboo-Based Gasification: Towards The Modern Renewable Energy
THE 7TH INTERNATIONAL CONFERENCE ON LOW CARBON ASIA AND BEYOND (ICLCA'21) Conference Paper CO-AUTHOR |
2021 |
|
Electroless Nickel Underlayer Deposited Between Copper Filler And Silicon Substrate: Effect Of Bath Ph
ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES Publication In Scopus CORRESPONDING AUTHOR |
2021 |
|
Seawater As New Renewable Energy
Resource: Material Characterization
Of The Cell Electrodes
LECTURE NOTES IN MECHANICAL ENGINEERING : RECENT TRENDS IN MANUFACTURING AND MATERIALS TOWARDS INDUSTRY 4.0 Publication In Scopus CORRESPONDING AUTHOR |
2021 |
|
Modelling And Control Analysis Of Bamboo-Based Gasification: Towards The Modern Renewable Energy
CHEMICAL ENGINEERING TRANSACTION Publication In Scopus CO-AUTHOR |
2021 |
|
Solar And Biomass Potential Of Renewable Energy In Selected Asean Countries And Japan
JOURNAL OF PHYSICS: CONFERENCE SERIES Publication In Scopus CO-AUTHOR |
2021 |
|
Evaluation Of The Convolutional Neural Network’S Performance In Classifying Steel Strip’S Surface Defects
RECENT TRENDS IN MECHATRONICS TOWARDS INDUSTRY 4.0 (SELECTED ARTICLES FROM IM3F 2020, MALAYSIA) Publication In Scopus CO-AUTHOR |
2021 |
|
Electrode Materials Application And Performance For Seawater Power
Source
MATERIALS TODAY: PROCEEDINGS Publication In Web Of Science CORRESPONDING AUTHOR |
2021 |
|
A Review On Plants And Biomass Wastes As Organic Green Corrosion Inhibitors For Mild Steel In Acidic Environment
METALS Publication In Web Of Science CO-AUTHOR |
2021 |
|
Electroless Deposited Black Nickel-Phosphorous Solar Absorber Coatings
On Carbon Steel: Effect Of Plating Bath Ph
MATERIALS TODAY: PROCEEDINGS Publication In Web Of Science CORRESPONDING AUTHOR |
2021 |
|
Composite Zeolite Hollow Fiber Membrane For The Removal Of Nickel Using Forward Osmosis
JOURNAL OF WATER PROCESS ENGINEERING Publication In Web Of Science CO-AUTHOR |
2021 |
|
Tin Whiskers’ Behavior Under Stress Load And The Mitigation Method For Immersion Tin Surface Finish
MATERIALS Publication In Web Of Science CORRESPONDING AUTHOR |
2021 |
|
The Effect Of Temperature On Nickel Deposited As An
Underlayer Between Copper Filler And Silicon Wafer
JOURNAL OF COMPUTATIONAL AND THEORETICAL NANOSCIENCE Journal Article Non Citation-Indexed CORRESPONDING AUTHOR |
2020 |
|
Evaluation Of The Convolutional Neural Network'S Performance In Classifying Steel Strips Surface Defects
INNOVATIVE MANUFACTURING, MECHATRONICS & MATERIALS FORUM 2020 Conference Paper CO-AUTHOR |
2020 |
|
Essential Characterization Of Metal Powder For Additive Manufacturing
THE 6TH INTERNATIONAL CONFERENCE ON SCIENCE, TECHNOLOGY AND INTERDISCIPLINARY RESEARCH (IC-STAR 2020) Conference Paper CO-AUTHOR |
2020 |
|
History Of Materials Lecture
Competition
WWW.IOMM.ORG.MY Publication In Academic And Profesional Magazine CO-AUTHOR |
2019 |
|
History Of Materials Lecture
Competition
WWW.IOMM.ORG.MY Publication In Academic And Profesional Magazine CO-AUTHOR |
2019 |
|
Characterization And Microstucture Analysis Of
Alumina Coating By Gas Tunnel Plasma Spray
28TH SCIENTIFIC CONFERENCE OF THE MICROSCOPY SOCIETY MALAYSIA (28TH SCMSM) Conference Paper CO-AUTHOR |
2019 |
|
Effect Of Cooling Rates On Morphology Evolution Of Primary
Mg2si In Alã¢Â€Â“15mg2siã¢Â€Â“0.3ba In-Situ Composite
27TH SCIENTIFIC CONFERENCE OF MICROSCOPY SOCIETY MALAYSIA Conference Paper CO-AUTHOR |
2018 |
|
Optimization Of Formaldehyde Concentration On Electroless Copper Deposition On
Alumina Surface
AIP CONFERENCE PROCEEDINGS Publication In Scopus CORRESPONDING AUTHOR |
2018 |
|
The Fuction Of Underlayer For Metallization Of Through Silicon Via (Tsv)
BASIC METHODOLOGY: SAMPLE PREPARATION AND CHARACTERIZATION Book Chapter CORRESPONDING AUTHOR |
2018 |
|
Copper Metallization Process Of Through Silicon Via (Tsv
BASIC METHODOLOGY: SAMPLE PREPARATION AND CHARACTERIZATION, Book Chapter CORRESPONDING AUTHOR |
2018 |
|
Electroless And Immersion Plating Process Towards Structures And Imc Formation
INTERNATIONAL JOURNAL OF ENGINEERING AND TECHNOLOGY Journal Article Non Citation-Indexed UTM FIRST AUTHOR |
2017 |
|
Tin Whiskers Formation And Growth On Immersion Sn Surface Finish Under External Stresses By Bending
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING Publication In Scopus CORRESPONDING AUTHOR |
2017 |
|
Effect Of Etching As Pre-Treatment For Electroless Copper Plating On Silicon Wafer
JURNAL TEKNOLOGI Publication In Scopus CORRESPONDING AUTHOR |
2017 |
|
DEVELOPMENT OF ALUMINUM METAL MATRIX COMPOSITES BY IN SITU AND EX SITU FABRICATION PROCESSES Clasified/Technical Report CO-AUTHOR |
2016 |
|
Comprehensive Review Of Different Methods For
Via Filling Process In Through Silicon Via (Tsv)
Fabrication
JOURNAL OF ADVANCED REVIEW ON SCIENTIFIC RESEARCH Journal Article Non Citation-Indexed UTM FIRST AUTHOR |
2016 |
|
Rate-Dependent Responses Of Electroless Plated And Sputtered Copper Layer During Nanoindentation Loading
PROCEEDINGS OF THE IEEE/CPMT INTERNATIONAL ELECTRONICS MANUFACTURING TECHNOLOGY (IEMT) SYMPOSIUM Publication In Web Of Science CO-AUTHOR |
2016 |
|
Electroless Ni-P Deposition By Using Organic Solvent
JURNAL MEKANIKAL Journal Article Non Citation-Indexed CO-AUTHOR |
2015 |
|
Tin Whiskers Behaviour On Immersion Tin
Surface Finish At High Temperature And Humidity
Condition
PROCEEDING OF THE 4TH WORLD VIRTUAL CONFERENCE ON APPLIED SCIENCES & ENGINEERING APPLICATIONS Proceedings CORRESPONDING AUTHOR |
2015 |
|
Tin Whiskers Behaviour On Immersion Tin
Surface Finish At High Temperature And Humidity
Condition
JOURNAL OF ADVANCED RESEARCH IN MATERIALS SCIENCE Journal Article Non Citation-Indexed CORRESPONDING AUTHOR |
2015 |
|
Review: Nickel Base Nanoparticles As New Nanoparticulate Of Non-Precious Metal For Future Application
PROCEEDING OF ASIAN CONFERENCE ON ENGINEERING AND NATURAL SCIENCE 2015 Proceedings INDIVIDUAL AUTHOR |
2015 |
|
Effect Of External Stresses By Bending On Sn Whiskers Formation And Growth On Immersion Sn Surface Finish
WORLD VIRTUAL CONFERENCE ON APPLIED SCIENCES AND ENGINEERING APPLICATIONS Proceedings CORRESPONDING AUTHOR |
2015 |
|
Effect Of Hydrofluoric Acid Etching On Electroless Copper Plating On Silicon
Wafer
4TH INTERNATIONAL CONFERENCE ON ADVANCED MANUFACTURING TECHNOLOGY (ICAMT 2015) Conference Paper CORRESPONDING AUTHOR |
2015 |
|
Electrophoretic Deposition Of Hydroxyapatite Coatings On Az31: The Effect Of Nanoparticle Multiple Coating Approach
ADVANCED MATERIALS RESEARCH Proceedings CO-AUTHOR |
2015 |
|
Synthesis And Electrocatalytic Performance Of Atomically Ordered Nickel Carbide (Ni3c)
Nanoparticles
CHEMICAL COMMUNICATION Publication In Web Of Science UTM FIRST AUTHOR |
2014 |
|
Effect Of The Formation Of Cuo Flowers And Sno2 On The Growth Of Tin Whiskers On Immersion Tin Surface Finish
WORLD VIRTUAL CONFERENCE ON ADVANCED RESEARCH IN MATERIALS AND ENGINEERING APPLICATIONS Conference Paper CORRESPONDING AUTHOR |
2014 |
|
Effect Of Externally Applied Stress On Tin Whiskers Formation And Growth For Immersion Tin Surface Finish
9TH INTERNATIONAL MATERIALS TECHNOLOGY CONFERENCE & EXHIBITION Conference Paper CORRESPONDING AUTHOR |
2014 |
|
Effect Of The Formation Of Cuo Flowers And Sno2 On The Growth Of Tin Whiskers On Immersion Tin Surface Finish
APPLIED MECHANICS AND MATERIALS: ADVANCED RESEARCH IN MATERIALS AND ENGINEERING APPLICATIONS Proceedings CORRESPONDING AUTHOR |
2014 |
|
The Effect Of Organic Solvent (Ethanol) On Electroless Ni-P Deposition
6TH INTERNATIONAL ELECTRONICS MANUFACTURING TECHNOLOGY CONFERENCES, IEMT Proceedings CO-AUTHOR |
2014 |
|
Effect Of Thin Coating Thickness On Tin Whiskers Formation And Growth
PROCEEDING OF 8TH SOUTH EAST ASIAN TECHNICAL UNIVERSITY CONSORTIUM (SEATUC) SYMPOSIUM Proceedings CORRESPONDING AUTHOR |
2014 |
|
Effect Of Ph On Electroless Nickel Deposition On Alumina Substrates For Chip Resistor Application
PROCEEDING OF 36TH INTERNATIONAL ELECTRONICS MANUFACTURING TECHNOLOGY CONFERENCES, IEMT Proceedings CORRESPONDING AUTHOR |
2014 |
|
Wet Chemical Synthesis Of Ni-Al Nanoparticles At Ambient Condition
ADVANCED MATERIALS RESEARCH Publication In Web Of Science CORRESPONDING AUTHOR |
2012 |
|
Non-Aqueous Electroless Nickel Plating Catalyzed By Alcl3 In Ambient Condition
6TH SOUTH EAST ASIAN TECHNICAL UNIVERSITY CONSORTIUM (SEATUC) SYMPOSIUM Conference Paper CORRESPONDING AUTHOR |
2012 |
|
Effect Of Solder Bump Size On Interfacial Reactions During Soldering Between Pb-Free Solder And Cu And Ni/Pd/Au Surface Finishes
JURNAL TEKNOLOGI Publication In Scopus CORRESPONDING AUTHOR |
2010 |
|
Corrosion Behavior Of Ni Thin Film Plating
WORLD JOURNAL OF ENGINEERING Journal Article Non Citation-Indexed CORRESPONDING AUTHOR |
2009 |
|
Effect Of Solder Bump Size On Interfacial Reactions During Soldering Between Pb-Free Solder And Cu And Ni/Pd/Au Surface Finishes
National Metallurgical Conference 2007 (NMC 2007) Conference Paper INDIVIDUAL AUTHOR |
2007 |
Legend : IP CATEGORY IP LEVEL
| Intellectual Property Name | Grant Register No. | IP Level | IP Category |
|---|---|---|---|
| METHOD FOR INHIBITING CORROSION OF MILD STEEL USING HYDROCHLORIC ACID SOLUTION EXTRACTING FROM BIOMASS WASTES | NATIONAL | PATENT | |
| TEACHING MATERIAL FOR CORROTION PART 3 | - | NATIONAL | COPYRIGHT |
| TEACHING MATERIAL FOR CORROTION PART 2 | - | NATIONAL | COPYRIGHT |
| TEACHING MATERIAL FOR CORROTION PART 1 | - | NATIONAL | COPYRIGHT |
| TEACHING MATERIAL FOR FATIQUE | - | NATIONAL | COPYRIGHT |
Legend : SESSION LEVEL OF STUDY STATUS SUPERVISION LEVEL
| Supervision List |
|---|
|
MOHAMMAD AMIRUL AFFIZ BIN AFRIPIN DAMAGE MECHANICS-BASED MODEL FOR RELIABILITY ASSESSMENT OF THROUGH-SILICON VIA INTERCONNECTS PHD GRADUATED CO-SUPERVISOR 2019 |
|
CHONG CHIN YEE CORROSION RESISTANCE ENHANCEMENT OF HYDROXYAPATITE AND MAGNESIUM OXIDE MULTILAYER COATING ON MAGNESIUM ALLOY AZ31 VIA ELECTROPHORETIC DEPOSITION PHD GRADUATED CO-SUPERVISOR 2021 |
|
SITI FAIZAH BINTI MAD ASASAARI TEMPERATURE AND STRAIN-RATE DEPENDENT DAMAGE-BASED MODELS FOR LEAD-FREE SOLDER INTERCONNECTS PHD GRADUATED CO-SUPERVISOR 2021 |
|
LAYLA HAYTHOOR KHARBOOT AL-AAYEDI EFFECT OF TEMPERATURE ON THE STABILITY OF NICKEL SULPHIDE REDUCED GRAPHENE OXIDE NANOCOMPOSITE COUNTER ELECTRODE IN QUANTUM DOT-SENSITIZED SOLAR CELLS PHD GRADUATED SUPERVISOR 2024 |
|
NORBA'AYAH BINTI AHMAD REZA SYHTHESIZING ORGANIC GREEN CORROSION INHIBITOR FROM MUSA ACUMINATA LEAVES FOR MILD STEEL IN ACIDIC ENVIRONMENT PHD GRADUATED CO-SUPERVISOR 2024 |
|
NURUL SYAFIQAH BINTI TAPAK PHD ON GOING SUPERVISOR |
|
MUHAMMAD AFIQ IRFAN BIN MOHD SHUMIRI ANTIMONY-MODIFIED DEALLOYED CONTINUOUS NANOPOROUS ZINCOPHILIC ANODE FOR HIGHLY REVERSIBLE ZINC-AIR BATTERY   PHD ON GOING SUPERVISOR |
|
MOHD IRWAN BIN MOHD AZMI IMPROVISATION ON MECHANICAL PROPERTIES OF WASTE TYRE RUBBER-REINFORCED PLA COMPOSITE FABRICATED BY FDM PHD ON GOING SUPERVISOR |
|
MUDASSAR HUSSAIN ROLE OF INTERMETALLICS AND OXIDES IN ENHANCING FRACTURE TOUGHNESS AND CORROSION RESISTANCE OF NOVEL ALCRNISITI HIGH ENTROPY ALLOY PHD ON GOING CO-SUPERVISOR |
|
NUR SUHAILI BINTI ISMAIL AL-ZN-MG-CU PSEUDO ALLOY COATING ON MILD STEEL SUBSTRATES FOR CORROSION RESISTANCE APPLICATIONS    PHD ON GOING CO-SUPERVISOR |
|
SITI ZAHIRA BINTI YUSOF EFFECT OF ENVIRONMENTAL CONDITION AND NICKEL UNDERLAYER ON WHISKERS FORMATION IN TIN SURFACE FINISH MASTER GRADUATED SUPERVISOR 2014 |
|
SHAZATUL AKMALIAH BINTI MIOR SHAHIDIN CHARACTERISATION OF ELECTROLESS DEPOSITION PARAMETER OF COPPER ON SILICON WAFER FOR THROUGH SILICON VIA APPLICATION MASTER GRADUATED SUPERVISOR 2019 |
|
NURFATIN LIYANA BINTI MOHD AMIN CHARACTERIZATION OF ELECTROLESS NICKEL UNDERLAYER DEPOSITION BETWEEN SILICON WAFER AND ELECTROLESS COPPER LAYER FOR THROUGH SILICON VIA (TSV) APPLICATION MASTER GRADUATED SUPERVISOR 2020 |
|
SHUHADA BINTI SHELLY MASTER GRADUATED SUPERVISOR 2020 |
|
NUR AISYAH BINTI JAMALUDIN LANTHANUM ORTHOFERRITE AS THE PHOTOCATALYST PREPARED USING SOL-GEL METHOD FOR OILY WASTEWATER TREATMENT MASTER GRADUATED CO-SUPERVISOR 2020 |
|
MOHAMAD YUSZAIMIE BIN ABDUL HAMID MASTER GRADUATED SUPERVISOR 2022 |
|
NUR ALYANI NAZIRAH BINTI MOHAMMAD RAFIX RESIDUAL STRESS ANALYSIS ON ANNEALED COLD DRAWN HIGH CARBON STEEL WIRE MASTER GRADUATED SUPERVISOR 2023 |
|
MUHAMMAD AZHANUDIN BIN BORHAN MASTER GRADUATED SUPERVISOR 2024 |
|
MUHAMMAD HAZRIN BIN HAMZAH MASTER GRADUATED SUPERVISOR 2024 |
|
NURUL NABILA BINTI MOHD FAUZI MASTER ON GOING SUPERVISOR |
|
SAYYIDATUL AISYAH BINTI SULAIMAN MASTER ON GOING SUPERVISOR |
|
SITI NOR ATIKAH BINTI MOHAMAD THE SYNTHESIS OF NICKEL SULPHIDE REDUCED GRAPHENE OXIDE (NIS/RGO) NANOCOMPOSITES BY HYROTHERMAL METHOD FOR SUPERCAPACITOR MASTER ON GOING SUPERVISOR |
|
ZAIDAN FARABY ZULKARNAIN ANALYSIS OF THE EFFECT OF PROCESS PARAMETERON THE ELECTRICAL AND MECHANICAL PROPERTIESOF CONDUCTIVE POLYMER MATERIAL INFUSED DEPOSITION MODELING 3D PRINTING MASTER ON GOING CO-SUPERVISOR |
|
ALIF FAJAR PUTRAWAN EFFECT OF ADDITION OF PR-SB AND EQUAL CHANNEL ANGULAR PRESSING (ECAP) ON MICROSTRUCTURAL AND MECHANICAL PROPERTIES OF AL-15%MG2SI COMPOSITE MASTER ON GOING CO-SUPERVISOR |
|
MOHD HANIF BIN MOHD NOR EFFECT OF AGING TREATMENT ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF 7075 AND 2319 ALUMINIUM ALLOYS FABRICATED VIA WIRE ARC ADDITIVE MANUFACTURING MASTER ON GOING CO-SUPERVISOR |
|
IZZA BT MAHMOD MASTER ON GOING SUPERVISOR |
|
NIK NUR ALISA BINTI MOHD AZMI MASTER ON GOING SUPERVISOR |
|
SARAH NADIAH BINTI NORDIN MECHANICAL PROPERTIES AND THERMAL DEGRADATION STUDY OF POLYVINYL CHLORIDE/ NANOCLAY SHEATH FOR STEEL WIRE ROPES MASTER ON GOING SUPERVISOR |
|
MUHAMMAD FAIZ BIN IBRAHIM MASTER ON GOING CO-SUPERVISOR |