GRANT(PI & MEMBERS)

34

PUBLICATIONS

41

INDEXED PUBLICATION

38

TOTAL STUDENTS

H-INDEXED (SCOPUS)

CITATIONS (SCOPUS)

Grant (PI)

INDUSTRY GRANTS
2
INTERNATIONAL GRANTS
6
NATIONAL GRANTS
6
UNIVERSITY FUND
5
TOTAL

Publications

INDEXED PUBLICATION
38
NON-INDEXED PUBLICATION
0
OTHERS PUBLICATION
3
TOTAL

Supervisions

DEGREE
0
MASTER
16
PHD
13
TOTAL

Legend : SPONSOR TYPE OF GRANT

Grant Name Year
Development of in-Situ Mg2 Si Reinforced Alunium Composites
POST DOCTORAL FELLOWSHIP Professional Development Research University
2013
MAGNESIUM ALLOYS SHELL INVESTMENT CASTING BY IN-SITU MELTING TECHNIQUE
RUG OF UTM Tier 1
2012
Development of Maerogel coating on metal substrate for high temperature applications
RUG OF UTM Tier 1
2012
DEVELOPMENT OF SILICON OXIDE BASED COATINGS FOR FOULING CONTROL IN LN LNG CARRIER
RUG OF UTM Flagship
2011
DEVELOPMENT OF IN- SITU MAGNESIUM-SILICON REINFORCED ALUMNIUM COMPOSITES
RUG OF UTM Tier 1
2011
Electrophoretic Nano hydroxyapatite coating on Mg-1.0ca alloy for surgical implant applications
RUG OF UTM Tier 1
2011
The Effect Of Sheel Mould Parameters And Granular Size On Heat Transfer Rate Of In-Situ Melted Magnesium Investment Casting
MINISTRY OF EDUCATION Fundamental Research Grant Scheme
2010
Lost Foam Casting Of Alumnium Alloys For Automotive Applications
MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund
2009
Intermetallic Compound Formation on Immersion Silver Finish
INTEL TECHNOLOGY SDN. BHD. Contract
2007
New Substrate Surface Finishes For Lead-Free Soldering
MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund
2007
Study Of Interfacial Reaction Between Lead-Free Solders and Alternative
INTEL TECHNOLOGY SDN. BHD. Non Goverment Agency
2007
Characterisation of Intermetallics and Study of Interfacial Voids during Soldering on Alternative Surface Finishes
INTEL TECHNOLOGY SDN. BHD. Contract
2001
Study of Intermetallic Compounds Formation Between Lead-Free Solders and Different Surfaces Finishes
INTEL TECHNOLOGY SDN. BHD. Contract
2000
Development of Endmills, Drills and Turning Tools From Ultra Fine Grained Carbides And Oxides For Aerospace, Automotive and Mold & Die
MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund
2000
Development Of New Binderless Diamond Layered Wheels For Ultra-Precision Grinding
MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund
2000
Development of Ultra-Thin Coated Precision Tools For Turning And Milling
MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund
2000
Effect Of Flux Chemistry On Cooper Oxide During Reflow
INTEL TECHNOLOGY SDN. BHD. Contract
1999
Impact of Lead-free Solder on the Reability of Different Surface Finishes on Cooper
INTEL TECHNOLOGY SDN. BHD. Contract
1998
Development of Thin-Wall Ductile Iron Castings for Automotive Applications
MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund
1998
High-temperature Performance of Titanium Aluminides (Ti-Al alloys) for Aerospace and Automotive Applications
MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund
1997
Modelling of Under Fill
INTEL TECHNOLOGY SDN. BHD. Contract
1997
Material Interactions and Solder properties During The Metallic Interconnection Process
INTEL TECHNOLOGY SDN. BHD. Contract
1996
The Production of MMC Using the Stir Casting Techniques
Short Term
1996
Quality Optimisation of Precision Cast Magnesium - Base Alloys for Aerospace Application
Short Term
1995
Quality Optimisation of Precision Cast Magnesium-Base Alloy for Aerospace Applications
MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund
1994
Grain Refinement of Aluminium -sillicon Alloys: The Key to Improving Perfomance of Aluminium Automative Alloys
Short Term
1994
Effect Of Microstructure On Cyclic Strength Response Of SIC/AI Metal Matrix Composite.
Short Term
1994
Processing Of Magnesium-Base Alloys Using Ceramic Shell Investment Casting Process
Short Term
1993
Pengujian Olein Sebagai Minyak Pelincir
Short Term
1993
Design Of An Automatic Cylinder Copper Planting Machine
Short Term
1993
Corrosion Behavior of AI2O3/SiC Fibres Reinforced AI 6061 Matrix Composites
Short Term
1992
Development of Cast Particulate Alumunium-matrix Composites for Automotive Applications
MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund
1992

Legend : PUBLICATION CATEGORY TYPE OF AUTHORS

Publication Name Year
Effect Of Bismuth And Strontium Interaction On The Microstructure Development, Mechanical Properties And Fractography Of A Secondary Al-Si-Cu-Fe-Zn Alloy
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
Publication In Web Of Science CO-AUTHOR
2015
Influence Of Carbon Content On The Mechanical Properties Of Ultra-High Strength Of Coated Steel Wire
Jurnal Teknologi (Sciences & Engineering)
Publication In Scopus CO-AUTHOR
2014
Evaluations Of Antimony And Strontium Interaction In An Al-Si-Cu-Zn Die Cast Alloy
THERMOCHIMICA ACTA
Publication In Web Of Science CO-AUTHOR
2014
Role Of Bismuth On Solidification, Microstructure And Mechanical Properties Of A Near Eutectic Al-Si Alloys
METALS AND MATERIALS INTERNATIONAL
Publication In Web Of Science CO-AUTHOR
2014
An Alternative Approach In Ceramic Shell Investment Casting Of Az91d Magnesium Alloy: In Situ Melting Technique
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
Publication In Scopus CO-AUTHOR
2014
Effect Of Thickness And Permeability Of Ceramic Shell Mould On In-Situ Melted Az91d Investment Casting
APPLIED MECHANICS AND MATERIALS
Publication In Scopus CO-AUTHOR
2014
Effect Of Solder Volume On Interfacial Reaction Between Sac405 Solders And En(B)Epig Surface Finish
ADVANCED MATERIALS RESEARCH
Publication In Scopus CO-AUTHOR
2014
Characterizations Of Zeolite, Polyaniline And Zeolite/Polyaniline As Antifouling Materials For Marine Applications
ADVANCED MATERIALS RESEARCH
Publication In Scopus CO-AUTHOR
2014
AuthorsãƒÂƒÃ‚ƒÃ‚¢Ã‚€Â™ Reply To Discussion Of ‘‘On The Refinement Mechanism Of Silicon In Al-Si-Cu-Zn Alloy With Addition Of BismuthãƒÂƒÃ‚ƒÃ‚¢Ã‚€Â™Ã¢Â€Â™
METALLURGICAL AND MATERIALS TRANSACTIONS A: PHYSICAL METALLURGY AND MATERIALS SCIENCE
Publication In Scopus UTM FIRST AUTHOR
2014
Thermal Characteristics And Corrosion Behaviour Of Mg-Xzn Alloys For Biomedical Applications
BULLETIN OF MATERIALS SCIENCE
Publication In Web Of Science CO-AUTHOR
2013
An Investigation On Interfacial Reaction Between In-Situ Melted Az91d Magnesium Alloy And Ceramic Shell Mold During Investment Casting Process
MATERIALS CHEMISTRY AND PHYSICS
Publication In Web Of Science CO-AUTHOR
2013
Combined Effect Of Bismuth Content And Cooling Rate On Microstructure And Mechanical Properties Of Al-8ã‚·5si-0ã‚·4mg-0ã‚·3fe Alloy
CANADIAN METALLURGICAL QUARTERLY
Publication In Scopus UTM FIRST AUTHOR
2013
Effect Of Applying Air Pressure On Gas Porosity In Lost Foam Casting Of Al-Si Alloy
ADVANCED MATERIALS RESEARCH
Publication In Scopus CO-AUTHOR
2013
Computer-Aided Cooling Curve Thermal Analysis Of Near Eutectic Al-Si-Cu-Fe Alloy: Effect Of Silicon Modifier/Refiner And Solidification Conditions On The Nucleation And Growth Of Dendrites
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
Publication In Scopus UTM FIRST AUTHOR
2013
Influence Of Flux On Melting Characteristics And Surface Quality Of In-Situ Melting Az91d
MATERIALS AND MANUFACTURING PROCESSES
Publication In Web Of Science CO-AUTHOR
2013
In Situ Melting And Solidification Assessment Of Az91d Granules By Computer-Aided Thermal Analysis During Investment Casting Process
MATERIALS AND DESIGN
Publication In Scopus CO-AUTHOR
2013
A Review Of Ceramic Shell Investment Casting Of Magnesium Alloys And Mold-Metal Reaction Suppression
MATERIALS AND MANUFACTURING PROCESSES
Publication In Scopus CO-AUTHOR
2013
The Usage Of Computer-Aided Cooling Curve Thermal Analysis To Optimise Eutectic Refiner And Modifier In Al-Si Alloys
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
Publication In Scopus UTM FIRST AUTHOR
2012
Effect Of Flux Composition On Mould-Magnesium Reaction During In-Situ Melting
AIP CONFERENCE PROCEEDINGS
Publication In Scopus CO-AUTHOR
2012
In-Situ Melting Assessment Of Az91d Granules By Thermal Analysis
ADVANCED SCIENCE LETTERS
Publication In Scopus CO-AUTHOR
2012
In-Situ Thermal Analysis And Macroscopical Characterization Of Mg-Xca And Mg-0.5ca-Xzn Alloy Systems
THERMOCHIMICA ACTA
Publication In Web Of Science CO-AUTHOR
2012
Properties Of Pressurized Lost Foam Casting Of Al-11si Alloy
ADVANCED MATERIALS RESEARH
Publication In Scopus CO-AUTHOR
2012
Effect Of Pattern Coating Thickness On Characteristics Of Lost Foam Al-Si-Cu Alloy Casting
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (ENGLISH EDITION)
Publication In Scopus UTM FIRST AUTHOR
2012
Characterization Of Az91d Granules Covered With A Flux During In-Situ Melting
PARTICLE & PARTICLE SYSTEMS CHARACTERIZATION
Publication In Web Of Science CO-AUTHOR
2012
Rheological Behavior And Stability Of Cassava Starch For Ceramic Mould Binder Application
ADVANCED MATERIALS RESEARCH
Publication In Scopus CO-AUTHOR
2012
Oxidation And Melting Characterizations Of Az91d Granules During In-Situ Melting
ADVANCED MATERIAL RESEARCH
Publication In Scopus CO-AUTHOR
2011
Effect Of Pouring Temperature And Melt Treatment On Microstructure Of Lost Foam Casting Of Al-Si Lm6 Alloy
ADVANCED MATERIALS RESEARCH
Publication In Scopus UTM FIRST AUTHOR
2011
Effect Of Bismuth On Microstructure Of Unmodified And Sr-Modified Al-7si-0.4mg Alloys
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (ENGLISH EDITION)
Publication In Scopus UTM FIRST AUTHOR
2011
Poisoning Effect Of Bismuth On Modification Behaviour Of Strontium In Lm25 Alloy
BULLETIN OF MATERIAL SCIENCE
Publication In Scopus UTM FIRST AUTHOR
2011
Effect Of Pressure On Structure And Properties Of Lost Foam Casting Of Al-11si Cast Alloy
APPLIED MECHANICS AND MATERIALS
Publication In Scopus CO-AUTHOR
2011
Eis Study Of Corrosion Behavior Of Metallic Materials In Ethanol Blended Gasoline Containing Water As A Contaminant
FUEL
Publication In Scopus CO-AUTHOR
2011
High Temperature Oxidation Of Az91d Magnesium Alloy Granule During In-Situ Melting
CORROSION SCIENCE
Publication In Scopus CO-AUTHOR
2011
Process Control Of Lost Foam Casting Slurry Viscosity And Dipping Time
JOURNAL OF APPLIED SCIENCE
Publication In Scopus UTM FIRST AUTHOR
2011
Effect Of Flask Vibration Time On Casting Integrity, Surface Penetration And Coating Inclusion In Lost Foam Casting Of AlãƒÂƒÃ‚ƒÃ‚¢Ã‚€ÂSi Alloy
AIP CONFERENCE PROCEEDINGS
Publication In Scopus CO-AUTHOR
2010
Artificial Neural Networks To Predict Of Liquidus Temperature In Hypoeutectic Al-Si Cast Alloys
JOURNAL OF APPLIED SCIENCE
Publication In Scopus UTM FIRST AUTHOR
2010
Influence Of Gating System, Sand Grain Size, And Mould Coating On Microstructure And Mechanical Properties Of Thin-Wall Ductile Iron
JOURNAL OF IRON AND STEEL RESEARCH, INTERNATIONAL
Publication In Scopus CO-AUTHOR
2010
Effect Of Thermomechanical Treatment On Microstructure And Hardness Behaviour Of Az63 Magnesium Alloy
ACTA METALLURGICA SINICA-ENGLISH LETTERS
Publication In Web Of Science CO-AUTHOR
2009
The Effectiveness Of Coatings When Turning Hardened Cold Work Tool Steel Aisi D2 (60 Hrc)
International Journal of Machining and Machinability of Materials
Publication In Scopus INDIVIDUAL AUTHOR
2008
Effect Of Surface Finisih Metallurgy On Intermetallic Compuands During Soldering With Tin-Silver-Copper Solders
Advances in Mechanical Engineering Part II
Book Chapter INDIVIDUAL AUTHOR
2008
Study On Interfacial Reaction Between Lead-Free Solders And Alternative Surface Finishes
National Metallurgical Conference 2007 (NMC 2007)
Conference Paper INDIVIDUAL AUTHOR
2007
Effect Of Solder Bump Size On Interfacial Reactions During Soldering Between Pb-Free Solder And Cu And Ni/Pd/Au Surface Finishes
National Metallurgical Conference 2007 (NMC 2007)
Conference Paper INDIVIDUAL AUTHOR
2007

Legend : IP CATEGORY IP LEVEL

Intellectual Property Name Grant Register No. IP Level IP Category

Legend : SESSION LEVEL OF STUDY STATUS SUPERVISION LEVEL

Supervision List
MOHD HASBULLAH BIN IDRIS

PHD ON GOING SUPERVISOR
AZMAH HANIM BINTI MOHAMED ARIFF
INTERFACIAL REACTION BETWEEN SN-37PB AND SN-4 AG-0.5CU SOLDERS ON DIFFERENT SURFACE FINISHES
PHD GRADUATED SUPERVISOR 2007
AHMAD KAMELY BIN MOHAMAD
PERFORMANCE OF CUBIC BORON NITRIDE AND MIXED CERAMICS TOOLS WHEN HARD TURNING TOOL STEEL
PHD GRADUATED CO-SUPERVISOR 2008
SAEED FARAHANY
EVALUATION OF THE EFFECT OF ADDITIVES AND THEIR INTERACTIONS ON SILICON MORPHOLOGY OF ALUMINIUM-SILICON-COPPER-MAGNESIUM CAST ALLOY BY THERMAL ANALYSIS
PHD GRADUATED SUPERVISOR 2011
MAJID KARIMIAN
EFFECTS OF PROCESS PARAMETERS ON LOST FOAM CASTING OF A1-SI (LM6) ALLOY
PHD GRADUATED SUPERVISOR 2011
ENGKU MOHAMMAD NAZIM BIN ENGKU ABU BAKAR
SURFACE TREATMENT ON TUNGSTEN CARBIDE SUBSTRATE PRIOR TO HOT FILAMENT CHEMICAL VAPOUR DEPOSITION DIAMOND COATING
PHD GRADUATED CO-SUPERVISOR 2014
TUTI YASMIN BINTI ALIAS
INHIBITION MOULD-METAL REACTION DURING CASTING OF PURE MAGNESIUM IN BLOCK INVESTMENT CASTING MOULD COATED WITH CALCIUM CARBONATE
PHD FAIL AND DISMISSAL CO-SUPERVISOR
ABDELSALAM IBRAHIM SALEM AHDASH
ZEOLITE/POLYANILINE BASED SELF-HEALING AND SILICON OXIDE COATINGS FOR MICROBIALLY INDUCED CORROSION INHIBITION
PHD GRADUATED CO-SUPERVISOR 2016
BEH KEH SHIN

MASTER ON GOING SUPERVISOR
LING TUONG THAI
MICROSTRUCTURE STUDY AND MECHANICAL PROPERTIES OF A356 ALUMINIUM CASTING ALLOY
MASTER GRADUATED SUPERVISOR 2005
TAN CHEU LI
EFFECT OF FLUXES ON INTERMETALLICS FORMED BETWEEN LEAD-FREE SOLDER AND DIFFERENT SURFACE FINISHES
MASTER GRADUATED SUPERVISOR 2006
SALIZA AZLINA BINTI OSMAN

MASTER GRADUATED SUPERVISOR 2008
SAFOURA OSHAGHI

MASTER GRADUATED SUPERVISOR 2008
SITI RABIATULL AISHA BINTI IDRIS
INTERFACIAL REACTIONS DURING SOLDERING OF SN - AG - CU LEAD FREE SOLDERS ON IMMERSION SILVER AND ELECTROLESS NICKEL / IM
MASTER GRADUATED SUPERVISOR 2008
WONG YUN HONG

MASTER GRADUATED CO-SUPERVISOR 2009
SHAHRIAR KOLEINI

MASTER GRADUATED CO-SUPERVISOR 2010
MOHAMMAD AZFAR CHE AZMI

MASTER GRADUATED SUPERVISOR 2011
MOHD AYUB BIN SULONG
NUMERICAL CHARACTERISATION OF HOLLOW SPHERE COMPOSITES BASED ON PERFORATED INCLUSIONS
MASTER GRADUATED SUPERVISOR 2011
SALAHELDIN AHMED MOHAMED SHARIF AHMED

MASTER GRADUATED SUPERVISOR 2012
LIM HOOI PENG
WHISKER GROWTH IN TIN SURFACE FINISHES BY IMMERSION TIN PLATING AND HOT DIPPING
MASTER GRADUATED SUPERVISOR 2013
SUHAIMI BIN SALLEH
EFFECTS OF DIE GEOMETRY AND DRAWING SPEEDS ON THE PRODUCTION OF HIGH TENSILE STRENGTH STEEL WIRE
MASTER GRADUATED CO-SUPERVISOR 2016