GRANT(PI & MEMBERS)
65
PUBLICATIONS
87
INDEXED PUBLICATION
69
TOTAL STUDENTS
H-INDEXED (SCOPUS)
CITATIONS (SCOPUS)
Grant (PI)
INDUSTRY GRANTS
3
INTERNATIONAL GRANTS
2
NATIONAL GRANTS
8
UNIVERSITY FUND
9
TOTAL
Publications
INDEXED PUBLICATION
69
NON-INDEXED PUBLICATION
7
OTHERS PUBLICATION
11
TOTAL
Supervisions
MASTER
16
PHD
14
TOTAL
Legend : SPONSOR TYPE OF GRANT
| Grant Name | Year |
|---|---|
| Development of 8JC with Teddy Therapy Profiling Modules and Integrated Assessment MINDMATICS RESOURCES SDN BHD Contract |
2024 |
| Modeling of implantation stability mechanism for Pauwels Type III femoral neck fracture Universiti Malaysia Perlis Networking Grant |
2024 |
| DEVELOPMENT OF BIOABSORBABLE ZINC-MANGANESE ALLOYS REINFORCED WITH CARBON NANOFIBER FOR ORTHOPAEDICS IMPLANT APPLICATION POST DOCTORAL FELLOWSHIP (SPECIAL) Professional Development Research University Special |
2024 |
| In Vitro and In Vivo Investigation of Bioabsorbable Carbon Nanofiber Reinforced Mg-Zn Composites as Orthopaedics Implant KEMENTERIAN SAINS, TEKNOLOGI DAN INOVASI (MOSTI) TECHNOLOGY DEVELOPMENT FUND |
2024 |
| Three-Dimensional Printed Dentures (3D Dentures) INNOVATION AND COMMERCIALISATION CENTRE (ICC) SME Innovation Technology Accelerator Fund |
2024 |
| Newcastle University Global Partnerships Fund NEWCASTLE UNIVERSITY Networking Grant |
2024 |
| sub SME InTech 00Q27: Three-dimensional printed dentures (3D dentures) Klinik Pergigian Bakti Contract |
2024 |
| MG3 - 5.1 : DEVELOPMENT OF BIOABSORBABLE MAGNESIUM-ZINC ALLOYS REINFORCED WITH CARBON NANOFIBER FOR ORTHOPAEDICS IMPLANT APPLICATION RUG OF UTM Matching Grant |
2023 |
| MG3 - 5.0 : Development of Bioabsorbable Magnesium-Zinc Alloys Reinforced with Carbon Nanofiber for Orthopaedics Implant Application UNIVERSITAS SRIWIJAYA International Grant |
2023 |
| Fundamental Development of Biodegradable Co-Electrospun PVA-Elastin/PU-Chitosan Nanofiber Tubular Graft for Vascular Regeneration and Tissue Integration MINISTRY OF EDUCATION Fundamental Research Grant Scheme |
2023 |
| Characterizations of physico-mechanical and thermal properties of toughened epoxy-based natural and synthetic fibre hybrid composite in novel design of locking compression plate MINISTRY OF EDUCATION Networking Grant |
2023 |
| Three-Dimensional Printed Prosthetic Leg Socket (3D-Pro-Leg) INNOVATION AND COMMERCIALISATION CENTRE (ICC) Prototype Development Fund |
2023 |
| Development of 4JC Teddy Therapy Skeleton Framework MINDMATICS RESOURCES SDN BHD Contract |
2023 |
| F4 4.0: Advanced Materials for Biodegradable Implant with Osseocompatibilty Properties RUG OF UTM Geran Penyelidikan Hi-Tech(F4) |
2022 |
| F4 4.1: Development of smart materials for orthopaedic degradable metallic implants RUG OF UTM Geran Penyelidikan Hi-Tech(F4) |
2022 |
| SCALEBONE INNOVATION AND COMMERCIALISATION CENTRE (ICC) Prototype Development Fund |
2022 |
| Synthesis of Electrospun Quercetin-loaded Polycaprolactone for Implantable Drug Delivery System RUG OF UTM UTM Fundamental Research |
2022 |
| THREE-DIMENSIONAL PRINTED INVISIBLE DENTAL BRACES FOR TREATING CROOKED AND CROWDED TEETH Klinik Pergigian Angkasa Sri Rampai Contract |
2022 |
| 4C615: THREE-DIMENSIONAL PRINTED INVISIBLE DENTAL BRACES FOR TREATING CROOKED AND CROWDED TEETH RUG OF UTM Matching Grant |
2022 |
| UTMSPC 1.8 :A novel design of 3d printed bone embedded with mobile augmented reality apps for education purpose UTM SPACE QUICK WIN RESEARCH GRANT |
2022 |
| Mechanical, degradation and microstructural evaluation of coated and uncoated Mg-Zn-CNF bioabsorbable screws UNIVERSITAS MUHAMMADIYAH RIAU International Grant |
2021 |
| 4B783 : Mechanical, degradation and microstructural evaluation of coated and uncoated Mg-Zn-CNF bioabsorbable screws RUG OF UTM Matching Grant |
2021 |
| LOW-COST PROSTHETIC LEG (LO-PLEG) INNOVATION AND COMMERCIALISATION CENTRE (ICC) Prototype Development Fund |
2020 |
| A NOVEL DESIGN OF PASSIVE EXOSKELETON IN ASSISTING AGED HEALTHCARE WORKERS RUG OF UTM UTM Encouragement Research |
2020 |
| Biomechanical study on the external fixator construct for treating fracture bone UNIVERSITI KUALA LUMPUR Non Goverment Agency |
2020 |
| 4B618 : Biomechanical Study on The External Fixator Construct for Treating Fracture Bone RUG OF UTM Matching Grant |
2020 |
| UTM FACE SHIELD DAN INTUBATION BOX: PENYEDIAAN PERLIDUNGAN UNTUK PETUGAS KESIHATAN MENANGANI COVID-19 RUG OF UTM UTM R&D Fund |
2020 |
| SUB KTP RIG: LANGKAH KAWALAN PEMBIAKAN NYAMUK AEDES - INOVASI PASU DARI BAHAN TERBUANG UNTUK PENANAMAN SAYUR-SAYURAN MAJLIS BANDARAYA ISKANDAR PUTERI,JOHOR BAHRU Networking Grant |
2020 |
| SUB KTP RIG: PERENCATAN KITAR HIDUP NYAMUK AEDES DI PERINGKAT JENTIK-JENTIK – INOVASI PRODUK HASIL TEKNOLOGI CETAKAN 3-D MAJLIS BANDARAYA ISKANDAR PUTERI,JOHOR BAHRU Networking Grant |
2020 |
| SUB-KTP RIG: LANGKAH KAWALAN PEMBIAKAN NYAMUK AEDES - PENGGUNAAN SISTEM APLIKASI TEKNOLOGI MAJLIS BANDARAYA ISKANDAR PUTERI,JOHOR BAHRU Networking Grant |
2020 |
| KESEDARAN BAHAYA DENGGI DI KEJIRANAN SETEMPAT: USAHA PENCEGAHAN DAN KAWALAN KEMENTERIAN KESIHATAN MALAYSIA Networking Grant |
2020 |
| PROJEK MENAMBAHBAIK KAEDAH PENCEGAHAN DAN KAWALAN DENGGI DI KANGKAR PULAI, JOHOR UNIVERSITI TEKNOLOGI MALAYSIA Centre for Community and Industry Network |
2020 |
| A Deep Learning Framework with Local Fine-Tuning Adaption for Medical Image Segmentation UNIVERSITI KUALA LUMPUR Networking Grant |
2019 |
| FUNDAMENTAL INVESTIGATION ON THE STRENGTH AND CORROSION PROPERTIES OF ABSORBABLE MAGNESIUM ALLOYS REINFORCED WITH CARBON NANOFIBER FOR MEDICAL IMPLANT APPLICATION MINISTRY OF EDUCATION Fundamental Research Grant Scheme |
2019 |
| EXPLORING THE FUNCTIONS OF REAL-TIME MOTION ANALYSIS AND CONVOLUTIONAL NEURAL NETWORK FOR TALENT ANALYSIS IN ATHLETES MINISTRY OF EDUCATION Fundamental Research Grant Scheme |
2019 |
| Sports Performance Analysis Using Visual Light System for Track & Field SUKMA 2020 RUG OF UTM Industry-International Incentive Grant |
2019 |
| DEVELOPMENT OF THREE-DIMENSIONAL PRINTED HAND CAST FOR TREATING BROKEN BONE RUG OF UTM Tier 2 |
2019 |
| WHEELCHAIR ASSIST DEVICE MODULAR KIT INNOVATION AND COMMERCIALISATION CENTRE (ICC) Prototype Development Fund |
2019 |
| SYNTHESIS AND CHARACTERIZATION OF POLYURETHANE MATERIAL FOR THE DEVELOPMENT OF SYNTHETIC BONE MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Inno Fund MESTECC |
2019 |
| Graph Transformed Deep Interactive Learning Framework In Medical Image Segmentation MINISTRY OF EDUCATION Networking Grant |
2019 |
| CUSTOM-MADE DESIGN OF SYNTHETIC BONE GUP GRANT Prototype Development Fund |
2018 |
| BIOMECHANICAL EVALUATION AND OPTIMISATION OF ANKLE EXTERNAL FIXATOR RUG OF UTM Tier 1 |
2018 |
| BIOMECHANICS STUDY AND POLE MECHANISATIONS FOR OIL PALM HARVESTING USING CARBON FIBER REINFORCED POLYMER (CFRP) AND SOFT ACTUATOR RUG OF UTM Matching Grant |
2018 |
| APPLICATION OF FITT PRINCIPLE IN INJURY PREVENTION AND EXERCISE REHABILITATION FOCUSING ON THE MOST COMMON SPORT INJURY USING FIBOD RUG OF UTM Tier 2 |
2018 |
| Investigation of biomechanical factor with influence of anthropometrics affecting optimum stroke technique for Malaysian elite rower RUG OF UTM COE Research Grant |
2018 |
| STRUCTURE AND PROPERTIES ANALYSIS OF POLYURETHANE MATERIAL AS A SYNTHETIC FEMUR BONE FORMEDICAL IMPLANT TESTING RUG OF UTM Tier 1 |
2018 |
| Investigating the Effects of Citric Acid on the Biomimetic Hydroxyapatite Growth Ability of Bacterial Nanocellulose Hydrogel for Potential Articular Cartilage RUG OF UTM UTMShine |
2017 |
| AN INTERACTIVE SEGMENTATION MODEL FOR ENHANCED KNEE CARTILAGE MANIFESTATION UNIVERSITI KUALA LUMPUR Networking Grant |
2017 |
| DEVELOPMENT OF A LOW COST SYNTHETIC TIBIA AND FIBULA BONE RUG OF UTM Potential Academic Staff |
2017 |
| A PRELIMINARY STUDY OF SURFACE HEAT DISTRIBUTION ON ASYMMETRICAL TUMOR EMBEDDED IN THREE-DIMENSIONAL BREAST MODELS WITH VARIOUS TISSUE DENSITIES. RUG OF UTM Potential Academic Staff |
2017 |
| ACRYLATE-BASED SHAPE MEMORY FOAMS SYNTHESIZED BY ORGANO-PHASE CRYO-POLYMERIZATION RUG OF UTM Potential Academic Staff |
2016 |
Legend : PUBLICATION CATEGORY TYPE OF AUTHORS
Legend : IP CATEGORY IP LEVEL
Legend : SESSION LEVEL OF STUDY STATUS SUPERVISION LEVEL
| Supervision List |
|---|
|
ABDUL HADI BIN ABDUL WAHAB GLENOID IMPLANT WITH NEW ARTIFICIAL GLENOID LABRUM USING POLYVINYL ALCOHOL HYDROGEL IN MINIMIZING ROCKING HORSE PHENOMENA PHD GRADUATED CO-SUPERVISOR 2017 |
|
HERMAN BIN TUMINOH SYNTHESIS AND CHARACTERIZATION OF BIODEGRADABLE MAGNESIUM ZINC ALLOY REINFORCED WITH CARBON NANOFIBER FOR POTENTIAL MEDICAL IMPLANT APPLICATIONS PHD GRADUATED SUPERVISOR 2021 |
|
AISHAH UMAIRAH BINTI ABD AZIZ BIOMECHANICAL ANALYSIS AND IMPROVEMENT ON FEMUR EXTERNAL FIXATOR PHD GRADUATED SUPERVISOR 2023 |
|
ADNAN AFZAL THE EFFECTIVENESS OF LOW-LEVEL LASER THERAPY ON PARTICULAR JOINT POINTS AND ACUPUNCTURE POINTS ON KNEE JOINTS IN GRADE III KNEE OSTEOARTHRITIS. PHD ON GOING SUPERVISOR |
|
MUHAMMAD HANIF BIN BAHARUDDIN BIOMECHANICAL ANALYSES OF THREE-DIMENSIONAL PRINTED TRANSTIBIAL PROSTHETIC LEG SOCKET   PHD ON GOING SUPERVISOR |
|
KUMRAVANI A/P SANTHIRANGATHAN NECK POSTURAL RISK AMONG MEDICAL LABORATORY WORKERS PHD ON GOING CO-SUPERVISOR |
|
MUHAMMAD IMAM AMMARULLAH PHD ON GOING SUPERVISOR |
|
ALA ABOBAKR ABDULHAFIDH AL-DUBAI FABRICATION AND CHARACTERIZATION ANALYSIS OF POLYDOPAMINE GRAFTED THREE-DIMENSIONAL PRINTED POLY(LACTIC ACID) MACRO-POROUS SCAFFOLD FOR BONE GRAFTING PHD ON GOING CO-SUPERVISOR |
|
NUR AFIKAH BINTI ZAINAL ABIDIN BIOMECHANICAL ANALYSIS OF GRAFT FIXATOR FOR ANTERIOR CRUCIATE LIGAMENT RECONSTRUCTION AND ITS IMPROVEMENT PHD ON GOING SUPERVISOR |
|
AKMAL HAKIM BIN MOHAMAD HUDZARI DESIGN OPTIMIZATION AND IMPROVEMENT OF HYBRID EXTERNAL FIXATOR FOR TIBIAL PLATEAU FRACTURES PHD ON GOING SUPERVISOR |
|
RISHATANI A/P GUNASEGARAN FABRICATION AND CHARACTERISATION OF MUCIN COATED AUXETIC STRUCTURE AS A BIOMECHANICALLY COMPATIBLE EPICARDIAL BIOMIMETIC PATCH FOR CARDIOVASCULAR APPLICATIONS   PHD ON GOING CO-SUPERVISOR |
|
SITI ADAWIYAH BINTI ZULKEFLI IN VIVO AND IN VITRO INVESTIGATION OF BIOABSORBABLE CARBON NANO FIBERS REINFORCED MG-ZN COMPOSITES AS ORTHOPAEDIC IMPLANT. PHD ON GOING SUPERVISOR |
|
ZATUL FAQIHAH BINTI MOHD SALAHA PHD ON GOING SUPERVISOR |
|
NIK NUR AIN AZRIN BINTI ABDULLAH DESIGN AND BIOMECHANICAL EVALUATION OF FEMORAL STEM EMBEDDED WITH LATTICE STRUCTURE VIA DESIGN OF EXPERIMENT APPROACH PHD ON GOING SUPERVISOR |
|
AHMED J. M. MUBARAK MASTER GRADUATED SUPERVISOR 2020 |
|
AMIR MUSTAKIM BIN AB RASHID BIOMECHANICAL EVALUATION OF INSOLE SUBJECTED TO SINGLE-LEG LANDING MASTER GRADUATED SUPERVISOR 2021 |
|
MUHAMMAD HANIF BIN BAHARUDDIN BIOMECHANICAL ANALYSES OF THREE-DIMENSIONAL PRINTED TRANSTIBIAL PROSTHETIC LEG SOCKET   MASTER ON GOING SUPERVISOR |
|
HASSAN HAITHM ABDULMALEK AL-RADHI MASTER GRADUATED SUPERVISOR 2021 |
|
MAYLORNA YUSOF MASTER GRADUATED SUPERVISOR 2021 |
|
SITI ADAWIYAH BINTI ZULKEFLI IN VIVO AND IN VITRO INVESTIGATION OF BIOABSORBABLE CARBON NANO FIBERS REINFORCED MG-ZN COMPOSITES AS ORTHOPAEDIC IMPLANT. MASTER GRADUATED SUPERVISOR 2022 |
|
NUR SYAFIQAH BINTI FAIDZUL HASSAN MASTER GRADUATED SUPERVISOR 2023 |
|
NUR NAJIAH HASYA BINTI NORMAN MASTER GRADUATED SUPERVISOR 2023 |
|
EIHAB JAMEILALLA MAHMOUD HAMOUD MASTER GRADUATED SUPERVISOR 2023 |
|
NATASHA LEONG KAH MAY MASTER GRADUATED SUPERVISOR 2023 |
|
KAMAL M. E. ASHOUR MASTER ON GOING SUPERVISOR |
|
BADRUL IRFAN BIN BADRUL HISHAM TOPOLOGY OPTIMIZATION ALGORITHM FOR ORTHOPAEDIC IMPLANT MASTER ON GOING SUPERVISOR |
|
NURIN TIHANI BINTI NAZEMI IN-VITRO AND IN-VIVO INVESTIGATION OF BIOABSORBABLE CARBON NANOFIBERS REINFORCED MG-ZN COMPOSITES AS ORTHOPAEDIC IMPLANT MASTER ON GOING SUPERVISOR |
|
NOR AQILAH BINTI MOHAMAD AZMI BIOMECHANICAL ANALYSES ON MAXILLA LE-FORT ONE OSTEOTOMY TREATED WITH PATIENT SPECIFIC PLATE MASTER ON GOING SUPERVISOR |
|
ZAHRAA FALAH ABED ALDABBAJ MASTER ON GOING CO-SUPERVISOR |
|
NOOR ALIA FATIHA BINTI KAMALLUDIN MASTER ON GOING SUPERVISOR |