UTM Scholar : PROFESOR IR. TS. DR. ZAINI BIN AHMAD

GRANT(PI & MEMBERS)

40

PUBLICATIONS

73

INDEXED PUBLICATION

48

TOTAL STUDENTS

H-INDEXED (SCOPUS)

CITATIONS (SCOPUS)

Grant (PI)

NATIONAL GRANTS

UNIVERSITY FUND

TOTAL

Publications

INDEXED PUBLICATION

NON-INDEXED PUBLICATION

OTHERS PUBLICATION

TOTAL

Supervisions

MASTER

PHD

TOTAL

Legend : SPONSOR TYPE OF GRANT

Search:

Grant Name	Year
Life Prediction of Drawn Steel Wire Ropes under Fretting Contact RUG OF UTM UTM R&D Fund	2025
Parametric and Factorial Studies of the Rear Under-Run Protection Device (RUPD) Energy Absorption Capability under Impact Loading Fundamental Research Grant Scheme	2023
Airborne Particle Dispersion and Characteristics Study and Impact on Indoor Environment for Ensuring Well-Being of Communities Institution Of Mechanical Engineers, Malaysia Branch Contract	2022
05E71 - Impact characteristic and energy absorption of crash-boxes filled with auxetic honeycomb under axial crushing load POST DOCTORAL FELLOWSHIP (SPECIAL) Professional Development Research University	2021
New Design of Tubular Auxetic Structure for Side Impact Safety of Vehicles RUG OF UTM UTM Fundamental Research	2020
Determination of crashworthy guardrail system for vehicle occupant safety in crash accident Fundamental Research Grant Scheme	2019
Mechanical degradation model of replication casted biodegradable scaffolds under static immersion Fundamental Research Grant Scheme	2019
UTM-TDR 10.2 (T1): Fretting Wear Damage Model for Fatigue Life Prediction of Steel Wire Ropes RUG OF UTM UTM Transdiciplinary Research Grant	2018
UTM-TDR 10: NEW GENERATION MATERIALS WITH ULTRAHIGH PERFORMANCE FOR HIGH IMPACT INDUSTRIES RUG OF UTM UTM Transdiciplinary Research Grant	2018
A NEW THREE DIMENSIONAL FRACTURE CRITERION FOR MIXED-MODE DELAMINATION RUG OF UTM Tier 1	2018
DYNAMIC MECHANICAL DEGRADATION MODEL OF TITANIA BIODEGRADABLE SCAFFOLDS RUG OF UTM UTMShine	2017
Frontal and rollover simulation of light weight bus superstructure RUG OF UTM Tier 1	2017
Development of auxetic foam for crashworthiness applications RUG OF UTM UTMShine	2016
Strain rate effect on the dynamic response of composite laminates RUG OF UTM Tier 2	2016
DAMAGE ASSESSMENT OF LAMINATED COMPOSITES BY DIGITAL IMAGE CORRELATION TECHNIQUE RUG OF UTM Matching Grant	2016

Showing 1 to 15 of 35 entries

Legend : PUBLICATION CATEGORY TYPE OF AUTHORS

Search:

Publication Name	Year
ANUGERAH KUALITI AKADEMIK Pelaporan / Penerbitan Khusus (Rancangan Malaysia, Statistik Kebangsaan) CO-AUTHOR	2024
Lightweight Glass Fiber-Reinforced Polymer Composite For Automotive Bumper Applications: A Review POLYMERS Publication In Web Of Science FIRST UTM CORRESPONDING AUTHOR	2023
Temperature Effects On The Low-Velocity Impact Of Fml Panels: Experimental And Numerical Analys INTERNATIONAL JOURNAL OF IMPACT ENGINEERING Publication In Web Of Science FIRST UTM CORRESPONDING AUTHOR	2023
An Insight From Nature: Honeycomb Pattern In Advanced Structural Design For Impact Energy Absorption JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY Publication In Web Of Science FIRST UTM CORRESPONDING AUTHOR	2023
Crashworthiness Capability Of Thin-Walled Fibre Metal Laminate Tubes Under Axial Crushing ENGINEERING STRUCTURES Publication In Web Of Science CORRESPONDING AUTHOR	2022
LIGHTWEIGHT MATERIAL FOR CRASH ABSORBER APPLICATIONS Original Book INDIVIDUAL AUTHOR	2022
Experimental Studies On The Impact Characteristics Of Seamless Fibre Metal Laminate (Fml) Tubes MATERIALS TODAY: PROCEEDINGS Publication In Scopus UTM FIRST AUTHOR	2021
Thermal Delamination Modelling And Evaluation Of Aluminium–Glass Fibre-Reinforced Polymer Hybrid POLYMERS Publication In Web Of Science CORRESPONDING AUTHOR	2021
Experimental And Numerical Analyses Of Temperature Effect On Glare Panels Under Quasi-Static Perforation COMPOSITE STRUCTURES Publication In Web Of Science CORRESPONDING AUTHOR	2021
The Impact Performance Of Vectran/Epoxy Composite Laminates With A Novel Non-Crimp Fabric Architecture COMPOSITE STRUCTURES Publication In Web Of Science UTM FIRST AUTHOR	2021
A Plane‑Stress Damage Model For Vectran Laminated Composite APPLIED COMPOSITE MATERIALS Publication In Web Of Science UTM FIRST AUTHOR	2021
Quantitative Fracture Mechanicsapproach To Fatigue Life Improvement By Shot Peening Applications INTERNATIONAL JOURNAL OF METALLURGY AND METAL PHYSICS Journal Article Non Citation-Indexed UTM FIRST AUTHOR	2020
Numerical Prediction On The Crashworthiness Of Circular And Square Thin-Walled Tubes With Polymeric Auxetic Foam Core JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE Publication In Web Of Science CORRESPONDING AUTHOR	2020
Validation Of Foam Filled Tube Model And Optimization Result Using Weibull Distribution LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES Publication In Web Of Science UTM FIRST AUTHOR	2020
Energy Absorption Of Frontal Longitudinal Rail For Automotive Structure LIGHTWEIGHT MATERIALS FOR STRUCTURAL APPLICATIONS Publication In Web Of Science CORRESPONDING AUTHOR	2020

Showing 1 to 15 of 73 entries

Legend : IP CATEGORY IP LEVEL

Search:

Intellectual Property Name	Grant Register No.	IP Level	IP Category
DYNAMIC MECHANICAL ENGINEERING PROGRAM AT UTM DYNA:MECH@UTM		NATIONAL	COPYRIGHT
TECHNIQUE OF POISSONS RATIO MEASUREMENT	LY2018006184	NATIONAL	COPYRIGHT
CONVERSION TECHNIQUE FROM CONVENTIONAL TO AUXETIC FOAM	LY2018006568	NATIONAL	COPYRIGHT
INDUSTRIAL ADVISORY PANEL EVALUATION FORM		NATIONAL	COPYRIGHT

Showing 1 to 4 of 4 entries

Legend : SESSION LEVEL OF STUDY STATUS SUPERVISION LEVEL

Search:

Supervision List
MOZAFAR SHOKRI RAD AUXETIC STRUCTURES FOR ENERGY ABSORBTION APPLICATIONS PHD GRADUATED SUPERVISOR 2015
MOHD NAZRUL BIN ROSLAN ENERGY ABSORPTION PERFORMANCE OF BRAIDED BASALT REINFORCED COMPOSITE TUBES UNDER AXIAL LOADS PHD GRADUATED CO-SUPERVISOR 2018
SAEID MOHSENIZADEH CRASHWORTHINESS PERFORMANCE OF OPTIMIZED AUXETIC FOAM-FILLED TUBES UNDER AXIAL LOADINGS PHD GRADUATED SUPERVISOR 2019
CHOW ZHEN PEI TEMPERATURE EFFECT ON THE LOW-VELOCITY IMPACT CHARACTERISTICS OF GLASS LAMINATED ALUMINIUM REINFORCED EPOXY PANELS PHD GRADUATED SUPERVISOR 2022
MASLINDA BINTI KAMARUDIN DAMAGE-BASED FRETTING WEAR MODEL FOR LIFE PREDICTION OF STEEL WIRE ROPES PHD GRADUATED SUPERVISOR 2022
MAZLAN BIN AHMAD MANSOR ENERGY ABSORPTION PERFORMANCE OF SEAMLESS FIBRE METAL LAMINATE TUBES PHD GRADUATED SUPERVISOR 2023
LIYANA BINTI ROSLAN MODAL IDENTIFICATION USING HYBRID VISION-BASED AND ACCELEROMETER SENSING METHOD PHD ON GOING SUPERVISOR
MINAH MOHAMMED FAREED ABD A AL DABAGH ENERGY ABSORPTION PERFORMANCES OF LUFFA-SPONGE FILLED CIRCULAR ALUMINUM TUBES FOR CRASHWORTHINESS APPLICATION &NBSP; &NBSP; PHD ON GOING SUPERVISOR
ABDELMUNEM BUSHRA ABDALLA AHMED MODIFIED ANALYTICAL MODEL OF POLYMER COMPOSITE LAMINATE UNDER STRAIN RATE PHD ON GOING CO-SUPERVISOR
WAN FAUZI YUSNI BIN AHMAD ENERGY ABSORPTION PERFORMANCES OF HYBRID MULTI-PHASE TUBES UNDER IMPACT LOADING. PHD ON GOING SUPERVISOR
INTANFIFIZIEANA BINTI MOHD ARIFF PREDICTION OF DAMAGE IN CFRP COMPOSITE LAMINATES USING DISPLACEMENT FIELD MEASURED BY DIC METHOD PHD ON GOING SUPERVISOR
CHIONG SIE SENG PHD ON GOING SUPERVISOR
OMAR ABDULHASAN LAFTA LATERAL CRUSHING OF AUXETIC STRUCTURE TUBE UNDER IMPACT LOADING PHD ON GOING SUPERVISOR
MOHAMAD SYAUQY AMIN BIN OTHMAN CRASH ANALYSIS OF A RAINFOREST VEHICLE UNDER FRONTAL IMPACT LOADING MASTER GRADUATED SUPERVISOR 2014
SAEID MOHSENIZADEH CRASHWORTHINESS PERFORMANCE OF OPTIMIZED AUXETIC FOAM-FILLED TUBES &NBSP; MASTER GRADUATED SUPERVISOR 2014

Showing 1 to 15 of 25 entries