UTM Scholar : PROF. MADYA TS. DR. NAZRI BIN KAMSAH

GRANT(PI & MEMBERS)

PUBLICATIONS

INDEXED PUBLICATION

TOTAL STUDENTS

H-INDEXED (SCOPUS)

CITATIONS (SCOPUS)

Grant (PI)

INDUSTRY GRANTS

NATIONAL GRANTS

UNIVERSITY FUND

TOTAL

Publications

INDEXED PUBLICATION

NON-INDEXED PUBLICATION

OTHERS PUBLICATION

TOTAL

Supervisions

MASTER

PHD

TOTAL

Legend : SPONSOR TYPE OF GRANT

Grant Name	Year
Effective Low Wind Speed Horizontal Axis Wind Turbine Prototype Development Fund	2018
IMPROVING THE CLIMATIC RATING IN A CAR CABIN RUG OF UTM Tier 1	2018
REFLECTION OF ACOUSTIC WAVE IN REAL ATMOSPHERE FOR HYPERSONIC BOUNDARY LAYER CONTROL RUG OF UTM Tier 1	2016
EFFECTS OF HEAT GENERATION ON AIRBORNE PARTICLES TRANSPORT IN A HOSPITAL OPERATING ROOM RUG OF UTM Tier 2	2016
EFFECTS OF REGENERATION AIR HUMIDITY ON MOISTURE REMOVAL CAPACITY OF A SOLID DESICCANT WHEEL SYSTEM RUG OF UTM Tier 1	2016
POWER GENERATION BY SMALL-SCALE WIND TURBINE RUG OF UTM Encouragement Grant	2015
Investigation on Moisture Adsorption Performance of Solid Desiccant Wheel Air Dehumidifier Fundamental Research Grant Scheme	2014
REDUCING AIR CONTAMINANTS IN A BUS PASSENGER COMPARTMENT RUG OF UTM Tier 1	2014
Damage Mechanics-Based Methodology for Reliability Assessment of Through-Silicon Via (TSV) Interconnects COLLABORATIVE RESEARCH IN ENGINEERING, SCIENCE & TECHNOLOGY CENTER (CREST) Non Goverment Agency	2013
NUMERICAL SIMULATION OF SOAK AIR TEMPERATURE IN A PASSENGER COMPARTMENT OF AN ELECTRIC CAR RUG OF UTM Tier 2	2012
Novel Self-tuning Evolutionary Controller for variable speed compressor of an automotive air conditioning system Exploratory Research Grant Scheme	2012
Methodology for Predicting Moisture-Induced Damage in Printed Circuit Board INTEL TECHNOLOGY SDN. BHD. Contract	2009
Biomechanical Analyses and Design Optimisation Using the Bone Remodeling Potential (BRP) for Hip Joint Arthroplasty. MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund	2007
Dynamic Modelling and Measurement of System/ Chassis Contract	2001
Predictive Methodology for Crack Initiation and Propagation in Interconnect Materials Contract	2001
Optimization of the Investment Casting Mould Production Procedure for Non-Ferrous Alloys Short Term	1999
Utilisation of Noise Suppression Techniques in the Development of Two-Stroke Stratified-Charge, Lean-Burn Gasoline Engines MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund	1998
Fluidised Bed Pyrolosis Rig-Product And System Upgrading With Technology Analysis MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund	1993
Refrigerated Sea Water System Short Term	1990

Legend : PUBLICATION CATEGORY TYPE OF AUTHORS

Publication Name	Year
Prediction Of Sick Building Syndrome (Sbs) Using Semi-Quantitative Score Via Environmetrics And Pattern Recognition Techniques INDOOR AIR 2020 VIRTUAL Conference Paper CO-AUTHOR	2020
The Effects Of Medical Staff Turning Movements On Airflow Distribution And Particle Concentration In An Operating Room JOURNAL OF BUILDING PERFORMANCE SIMULATION Publication In Web Of Science CO-AUTHOR	2020
Medical Staff'S Posture On Airflow Distribution And Particle Concentration In An Operating Room IOP CONF. SERIES: MATERIALS SCIENCE AND ENGINEERING Publication In Scopus CO-AUTHOR	2020
Enhancement Of Thermal Comfort In A Large Space Building ALEXANDRIA ENGINEERING JOURNAL (AEJ) Publication In Web Of Science CO-AUTHOR	2019
Performance Analysis Of Low Gwp Refrigerants Mixture As A Substitute For R410a In Residential Air Conditioner In Tropical Region IOP CONFERENCE SERIES: EARTH AND ENVIRONMENTAL SCIENCE Publication In Web Of Science CO-AUTHOR	2019
Enhancement Of Airborne Particles Removal In A Hospital Operating Room INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING Publication In Scopus CO-AUTHOR	2019
Heat Transfer Model To Predict Human Skin Temperature Under Comfort Levels By Using Bioheat Equation. INTERNATIONAL JOURNAL OF ONLINE & BIOMEDICAL ENGINEERING Publication In Scopus CO-AUTHOR	2019
Heat Transfer Model For Firefighters' Burn Injury INDIAN JOURNAL OF PUBLIC HEALTH RESEARCH AND DEVELOPMENT Publication In Scopus CO-AUTHOR	2019
Effects Of Surgical Staff Turning Motion On Airflow Distribution Inside A Hospital Operating Room EVERGREEN JOINT JOURNAL OF NOVEL CARBON RESOURCE SCIENCES & GREEN ASIA STRATEGY Publication In Scopus CO-AUTHOR	2019
Heat Transfer Model For Steam Burn Injury Among Fire Fighter INTERNATIONAL JOURNAL OF RECENT TECHNOLOGY AND ENGINEERING Publication In Scopus CO-AUTHOR	2019
Simulation Of Adsorption Process In A Rotary Solid Desiccant Wheel INTERNATIONAL JOURNAL OF TECHNOLOGY (IJTECH) Publication In Scopus CO-AUTHOR	2019
Simulation Of Adsorption Process In A Rotary Solid Desiccant Wheel AIP CONFERENCE PROCEEDINGS Publication In Scopus CO-AUTHOR	2019
Application Bioheat Equation For Heat Transfer Model Of Fire Fighterâ€™S Burn Injury 2ND ASIA INTERNATIONAL MULTIDISCIPLINARY CONFERENCE (AIMC 2018) Proceedings CO-AUTHOR	2018
Efficiency Of Three Distinct Types Of Mesh For Indoor Airflow Simulation PROCEEDINGS OF AARHIES INTERNATIONAL CONFERENCE KUALA LUMPUR, MALAYSIA Proceedings CO-AUTHOR	2018
Simulation Of Airflow And Airborne Particles Movement Inside A Hospital Operating Room THE 7TH INTERNATIONAL GRADUATE CONFERENCE ON ENGINEERING, SCIENCE & HUMANITIES Proceedings CO-AUTHOR	2018
Impacts Of Temperature On Airborne Particles In A Hospital Operating Room JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES Publication In Scopus CO-AUTHOR	2018
Reducing Air Pollutants In A Kitchen Environment JURNAL MEKANIKAL Journal Article Non Citation-Indexed CO-AUTHOR	2018
Correlation Between Particulate Matter And Microbial Counts In Hospital Operating Rooms ADVANCES IN ENVIRONMENTAL BIOLOGY Journal Article Non Citation-Indexed CO-AUTHOR	2018
Real-Time Measurements Of Relative Humidity And Temperature In Hospital Operating Room INTERNATIONAL JOURNAL OF MECHANICAL AND PRODUCTION ENGINEERING Journal Article Non Citation-Indexed CO-AUTHOR	2017
Clean Room Performance Testing In Hospital'S Vascular Interventional Radiology Laboratory INTERNATIONAL JOURNAL OF MECHANICAL AND PRODUCTION ENGINEERING Journal Article Non Citation-Indexed CO-AUTHOR	2017
Comparison Of Turbulence Models In Solving The Airflow In A Unidirectional Airflow Operating Room INTERNATIONAL JOURNAL OF ADVANCED RESEARCH IN ENGINEERING & TECHNOLOGY Journal Article Non Citation-Indexed CO-AUTHOR	2017
Effect Of Air Change Rate On Airborne Particles Concentration In Hospital Operating Rooms PROCEEDING OF THE IAARHIES INTERNATIONAL CONFERENCE 23-24 AUGUST 2017, LONDON, UK Proceedings CO-AUTHOR	2017
Comparison Of Turbulence Models In Solving The Airflow In A Unidirectional Airflow Operating Room PROCEEDING OF THE IAARHIES INTERNATIONAL CONFERENCE 23-24 AUGUST 2017, LONDON, UK Proceedings CO-AUTHOR	2017
Real-Time Measurements Of Relative Humidity And Temperature In Hospital Operating Room IASTEM INTERNATIONAL CONFERENCE Proceedings CO-AUTHOR	2017
Cfd Prediction Of Shroud Model Effect On Horizontal Axis Wind Turbine Performance Under Low Wind Speed Condition PROCEEDINGS OF THE 9TH INTERNATIONAL MEETING ON ADVANCES IN THEMOFLUIDS Proceedings CO-AUTHOR	2017
Cleanroom Performance Testing In Hospital'S Vascular Interventional Radiology Laboratory PROCEEDINGS OF IASTEM INTERNATIONAL CONFERENCE Proceedings CO-AUTHOR	2017
Effects Of Surgical Lamp And Staff Surface Temperatures On Particles Distribution In A Hospital Operating Room PROCEEDINGS OF THE 9TH INTERNATIONAL MEETING ON ADVANCES IN THERMOFLUIDS 2017 (IMAT2017) Proceedings CO-AUTHOR	2017
Air Temperature, Airflow Velocity And Carbon Dioxide Dispersal Inside A Domestic Kitchen Space PROCEEDINGS OF THE 9TH INTERNATIONAL MEETING ON ADVANCES IN THERMOFLUIDS 2017 (IMAT2017) Proceedings CORRESPONDING AUTHOR	2017
Effect Of Air Change Rate On Airborne Particles Concentration In Hospital Operating Rooms JOURNAL OF ADVANCED RESEARCH IN ENGINEERING & TECHNOLOGY Journal Article Non Citation-Indexed CO-AUTHOR	2017
Indoor Air Of A Double-Storey Residential House In Malaysia JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES Publication In Scopus CO-AUTHOR	2017
Energy Saving Potential Of An Air-Conditioner - Ice Thermal Storage (Ac-Its) System JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES Publication In Scopus CO-AUTHOR	2017
Vertical Airflow System PARTICLES TRANSPORT IN HOSPITAL OPERATING ROOM Book Chapter CO-AUTHOR	2017
Hospital Operating Room PARTICLES TRANSPORT IN HOSPITAL OPERATING ROOM Book Chapter CO-AUTHOR	2017
Thermal Analysis Of Heat Sink-Flip Chip Ball Grid Array Package Assembly Using Finite Element Method RECENT TREND IN DYNAMIC MODELLING, SYSTEM & CONTROL 2016 PART 1 Book Chapter CORRESPONDING AUTHOR	2016
Effects Of Air Supply Diffusers And Air Return Grilles Layout On Contaminants Concentration In Bus Passenger Compartment INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY Publication In Web Of Science CO-AUTHOR	2016
Field Measurement Of Cleanroom Parameters In Hospital'S Vascular Interventional Radiology Laboratory PROCEEDINGS OF THE 6TH INTERNATIONAL GRADUATE CONFERENCE ON ENGINEERING, SCIENCE & HUMANITIES (IGCESH 2016) Proceedings CO-AUTHOR	2016
Effect Of Regeneration Air Temperature On Desiccant Wheel Performance INTERNATIONAL JOURNAL OF TECHNOLOGY Publication In Scopus CO-AUTHOR	2016
Effectiveness Of Blade Tip On Low Speed Horizontal Axis Wind Turbine Performance JURNAL TEKNOLOGI Publication In Scopus CO-AUTHOR	2016
Improvement Of Thermal Comfort Inside A Mosque Building JURNAL TEKNOLOGI Publication In Scopus CO-AUTHOR	2016
Performance Assessment Of A Solid Desiccant Air Dehumidifier JURNAL TEKNOLOGI Publication In Scopus CO-AUTHOR	2016
Reducing Soak Air Temperature Inside A Car Compartment Using Ventilation Fans JURNAL TEKNOLOGI Publication In Scopus CO-AUTHOR	2016
A Systematic Assessment Of Cleanroom Performance In Hospital'S Operating Room PROCEEDINGS OF 9TH & 10TH IAARHIES INTERNATIONAL CONFERENCES Proceedings CO-AUTHOR	2016
Comparison Of Cleanroom Performance In Hospital Culture And Vascular Interventional Radiology Laboratories INTERNATIONAL CONFERENCE ON SCIENCE, TECHNOLOGY, ENGINEERING AND MANAGEMENT (ICSTEM) Conference Paper CO-AUTHOR	2016
Design And Validation Of Optimal Low Speed Horizontal Axis Wind Turbine Blades For Application In Malaysia 1ST MULTIDISCIPLINARY CONFERENCE ON MECHANICAL ENGINEERING Proceedings CO-AUTHOR	2016
Assessment Of Thermal Comfort In The Mosque 6TH INTERNATIONAL GRADUATE CONFERENCE ON ENGINEERING, SCIENCE & HUMANITIES 2016 (IGCESH 2016) Conference Paper CO-AUTHOR	2016
Correlation Between Particulate Matter And Microbial Counts In Hospital Operating Rooms IPN CONFERENCES OSAKA 2016 Conference Paper CO-AUTHOR	2016
Energy Saving Potential Of An Air-Conditioner - Ice Thermal Storage (Ac-Its) System 1ST MULTIDISCIPLINARY CONFERENCE ON MECHANICAL ENGINEERING 2016 Proceedings CO-AUTHOR	2016
Improvement Of Thermal Comfort In A Lecture Room Environment THERMODYNAMICS AND SUSTAINABLE DEVELOPMENT Book Chapter CO-AUTHOR	2016
Effects Of Surgeon Movement On Particle Settlement In A Hospital'S Operating Room. INTERNATIONAL CONFERENCE ON Ã¢Â€ÂœENGINEERING & TECHNOLOGY, COMPUTER, BASIC AND APPLIED SCIENCESÃ¢Â€Â (ECBA-2016), MELBOURNE, AUSTRALIA Conference Paper CO-AUTHOR	2016
Experimental Study On Performance Of Low Speed Wind Turbine For Application In Malaysia JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES Journal Article Non Citation-Indexed CO-AUTHOR	2016
Numerical Investigation Of Vortex Formation Effect On Horizontal Axis Wind Turbine Performance In Low Wind Speed Condition JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES Journal Article Non Citation-Indexed CO-AUTHOR	2016
Numerical Simulation Of Soak Air Temperature In A Passenger Compartment Of An Electric Car GUP 2012 COLLOQUIUM Proceedings CO-AUTHOR	2016
Cfd Simulation Of Air Temperature Inside A Bus Passenger Compartment APPLIED MECHANICS AND MATERIALS Proceedings CO-AUTHOR	2015
Effect Of Regeneration Air Temperature On The Performances Of A Desiccant Wheel THE 8TH INTERNATIONAL MEETING ON ADVANCES IN THERMOFLUIDS (IMAT) 2015 Conference Paper CO-AUTHOR	2015
Experimental Study On A Cold Storage System With A Variable Speed Compressor THE 8TH INTERNATIONAL MEETING ON ADVANCES IN THERMOFLUIDS (IMAT2015) Conference Paper CORRESPONDING AUTHOR	2015
Performance Analysis Of A Solid Desiccant Air Dehumidifier JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES Journal Article Non Citation-Indexed CO-AUTHOR	2015
Cfd Simulation Of Particulate Matters Inside A Bus Passenger Compartment INTERNATIONAL JOURNAL OF MECHANICAL AND MECHATRONICS ENGINEERING Publication In Scopus CO-AUTHOR	2015
Reducing Indoor Air Contaminants Inside A Bus Passenger Compartment INTERNATIONAL JOURNAL OF MECHANICAL & MECHATRONICS ENGINEERING Publication In Scopus CO-AUTHOR	2015
A Cfd Simulation Of Pm1 And Co Air Contaminants In A Bus Passenger Compartment JURNAL TEKNOLOGI Publication In Scopus CO-AUTHOR	2015
Field Measurement Of Particulate Matter Inside A Bus Passenger Compartment JURNAL TEKNOLOGI Publication In Scopus CO-AUTHOR	2015
Effects Of Ventilation Setups On Air Flow Velocity And Temperature Fields In Bus Passenger Compartment JURNAL TEKNOLOGI Publication In Scopus CO-AUTHOR	2015
Field Measurement Of Airborne Particulate Matters Concentration In A Hospital'S Operating Room JURNAL TEKNOLOGI Publication In Scopus CO-AUTHOR	2015
Application Of Thermal Energy Storage System For A Lowland Greenhouse JURNAL TEKNOLOGI Publication In Scopus CO-AUTHOR	2015
Analysis Of Air And Airborne Particles Movements In A Hospital Operating Theater THE 7TH INTERNATIONAL MEETING ON ADVANCES IN THERMOFLUIDS Conference Paper CO-AUTHOR	2014
Vapor Pressure Development In A Fr4-Cu Composite Structure During Solder Reflow THE 7TH INTERNATIONAL MEETING ON ADVANCES IN THERMOFLUIDS Conference Paper CORRESPONDING AUTHOR	2014
Field Measurement Of Airborne Particulate Matters Concentration In A Hospital'S Operating Room THE 7TH INTERNATIONAL MEETING ON ADVANCES IN THERMOFLUIDS Conference Paper CO-AUTHOR	2014
A Cfd Simulation Of Indoor Air Contaminant On Ventilation System In A Bus Passenger Compartment THE 7TH INTERNATIONAL MEETING ON ADVANCES IN THERMOFLUIDS Conference Paper CO-AUTHOR	2014
Artificial Neural Networks For Automotive Air-Conditioning Systems Performance Prediction APPLIED THERMAL ENGINEERING Publication In Web Of Science CO-AUTHOR	2013
Computerized Simulation Of Automotive Air-Conditioning System: A Parametric Study IJCSI INTERNATIONAL JOURNAL OF COMPUTER SCIENCE ISSUES Journal Article Non Citation-Indexed CO-AUTHOR	2013
Deformation Response Of Steel Sheet Metal Under Transverse Impact Loading INTERNATIONAL REVIEW OF MECHANICAL ENGINEERING Publication In Scopus CO-AUTHOR	2012
Computerized Simulation Of Automotive Air-Conditioning System: Development Of Mathematical Model And Its Validation IJCSI International Journal of Computer Science Issues Journal Article Non Citation-Indexed CO-AUTHOR	2012
Development Of Vapor Pressure In Fr4-Copper Composite Material During Solder Reflow Process AIP CONFERENCE PROCEEDINGS Publication In Scopus CORRESPONDING AUTHOR	2012
Assessment Of Thermal Comfort In A Naturally Ventilated Residential Terrace House AIP CONFERENCE PROCEEDINGS Publication In Scopus CO-AUTHOR	2012
Exploring The Potential Use Of Adhesion Strength For Coating Analysis INTERNATIONAL JOURNAL OF APPLIED PHYSICS AND MATHEMATICS Journal Article Non Citation-Indexed CO-AUTHOR	2012
Numerical Analysis Of Air-Flow And Temperature Field In A Passenger Car Compartment AIP CONFERENCE PROCEEDINGS Publication In Scopus CO-AUTHOR	2012
Damage And Fracture Mechanics-Based Design Methodology: Constitutive And Damage Models For Steel Sheet Metals. Computationally Optimized Fuel-Efficient Concept Car Book Chapter CO-AUTHOR	2011
Simulation Of Thermal Comfort Of A Residential House. IJCSI INTERNATIONAL JOURNAL OF COMPUTER SCIENCE ISSUES. Journal Article Non Citation-Indexed CO-AUTHOR	2011
Energy Density Mechanics Applied To Coating Blistering Problems THEORETICAL AND APPLIED FRACTURE MECHANICS Publication In Web Of Science CO-AUTHOR	2011
- Dynamic Modeling and Measurement of System/Chassis Clasified/Technical Report CORRESPONDING AUTHOR	2009
Two-Dimensional Modeling To Compute Plastic Zone In Front Of Compact Tension Sample Of A Multiphase Material Computational Material Science Publication In Scopus CO-AUTHOR	2009
Interface Micromotion Of Cementless Hip Stems In Simulated Hip Arthroplasty AMERICAN JOURNAL OF APPLIED SCIENCES Publication In Scopus CO-AUTHOR	2009
Biomechanics Of A Lumbar Section After Disc Arthroplasty European Journal of Scientific Research, 39(1) Publication In Scopus CO-AUTHOR	2009
The Effect Of Bone Properties Due To Skeletal Diseases On Stability Of Cementless Hip Stems AMERICAN JOURNAL OF APPLIED SCIENCES Publication In Scopus CO-AUTHOR	2009
Analysis Of Glenoid Fixation Features Under Simulated Off-Centre Loading EUROPEAN JOURNAL OF SCIENTIFIC RESEARCH Publication In Scopus CO-AUTHOR	2009
The Effect Of Fins And Ridges On The Stability Of Cementless Acetabular Cup Prostheses International Conference on Biomedical Engineering, BME Days, 2008 Conference Paper CO-AUTHOR	2008
Miniplates Orientation For Fracture Fixation Of The Mandibular Condyle 4th International Conference on Biomedical Engineering, BIOMED, 2008 Conference Paper CO-AUTHOR	2008
Finite Element Study Of Metacarpophalangeal Joint Silicone Implants 4th International Conference on Biomedical Engineering, BIOMED, 2008 Conference Paper CO-AUTHOR	2008
Comparison Between Aligned And Slanted Peg Glenoid Component For Shoulder Arthroplasty International Conference on Biomedical Engineering, BME days, 2008 Conference Paper CO-AUTHOR	2008
Interface Micromotion Of Cementless Hip Arthroplasty: Collared Vs Non-Collared Stems 4th International Conference on Biomedical Engineering, BIOMED, 2008 Conference Paper CO-AUTHOR	2008
Micro-Modeling And Analysis Of Actual And Idealised Cancellous Structure 4th International Conference on Biomedical Engineering, BIOMED, 2008 Conference Paper CO-AUTHOR	2008
Stability Of Talus Component In Total Ankle Arthroplasty 4th International Conference on Biomedical Engineering, BIOMED, 2008 Conference Paper CO-AUTHOR	2008
Finite Element Study Of An Artificial Intervertebral Disc (Ivd) Sandwiched Between Two Vertebrae International Conference on Biomedical Engineering, BME Days, 2008 Conference Paper CO-AUTHOR	2008
Eccentric Loading On The Tibial Plate After Knee Replacement 4th Kuala Lumpur International Conference on Biomedical Engineering Conference Paper INDIVIDUAL AUTHOR	2008
Effect Of Metal Back Geometry On The Stability Of Cementless Acetabular Cup 4th Kuala Lumpur International Conference on Biomedical Engineering Conference Paper INDIVIDUAL AUTHOR	2008
Finite Element Study Of Metacarpophalangeal Joint Silicone Implants 4th Kuala Lumpur International Conference on Biomedical Engineering Conference Paper INDIVIDUAL AUTHOR	2008
Interface Micromotion Of Cementless Hip Arthroplasty: Collared Vs Non-Collared Stems 4th Kuala Lumpur International Conference on Biomedical Engineering Conference Paper INDIVIDUAL AUTHOR	2008
Micromotion Of Metacarpophalangeal Joint Silicone Implants Under Sideways Loading International Conference on Biomedical Engineering, BME Days, 2008 Conference Paper CO-AUTHOR	2008
Flexibility Of Proximal Interphalangeal Joint (Pip) After Joint Replacement International Conference on Biomedical Engineering, BME Days, 2008 Conference Paper CO-AUTHOR	2008
The Effect Of Different Types Of Plates On The Stability Of Condylar Fracture International Conference on Biomedical Engineering, BME Days, 2008 Conference Paper CO-AUTHOR	2008
Biomechanical Analysis Of A Semiconstrained Elbow Prosthesis International Conference on Biomedical Engineering, BME Days, 2008 Conference Paper CO-AUTHOR	2008
Biomechanical Analysis Of Semiconstrained And Unconstrained Elbow Replacements ICE 2008 Conference Paper CO-AUTHOR	2008
The Effect Of Fins And Ridges On The Stability Of Cementless Acetabular Cup Prostheses International Conference on Biomedical Engineering, BME Days, 2008 Conference Paper CO-AUTHOR	2008
Finite Element Analysis Of Mandibular Fractures With Rigid Fixation International Conference on Biomedical Engineering, BME Days, 2008 Conference Paper CO-AUTHOR	2008
The Use Of Implant For Total Knee Arthroplasty In The Treatment Of Unicompartmental Defect International Conference on Biomedical Engineering, BME Days, 2008 Conference Paper CO-AUTHOR	2008
Interfacial Conditions Of Cementless Acetabular Cup Prostheses Under Physiological Load ICE 2008 Conference Paper CO-AUTHOR	2008
Mechanics Of Leaded And Lead-Free Solder Joints During Reflow And Temperature Cycles COMET 2008 Conference Paper CO-AUTHOR	2008
Inite Element Study Of Two Design Features Of Talus Component International Conference on Biomedical Engineering, BME Days, 2008 Conference Paper CO-AUTHOR	2008
Effect Of Metal Backed Geometry On The Stability Of Cementless Acetabular Cup 4th International Conference on Biomedical Engineering, BIOMED, 2008 Conference Paper CO-AUTHOR	2008
Eccentric Loading On The Tibial Plate After Knee Replacement 4th International Conference on Biomedical Engineering, BIOMED, 2008 Conference Paper CO-AUTHOR	2008
Stress Transfer And Stability Of Interlocking Mechanisms In Abutment Design International Conference on Biomedical Engineering, BME Days, 2008 Conference Paper CO-AUTHOR	2008
Miniplates Orientation For Fracture Fixation Of The Mandibular Condyle 4th Kuala Lumpur International Conference on Biomedical Engineering Conference Paper INDIVIDUAL AUTHOR	2008
Flexibility Of Proximal Interphalangeal Joint (Pip) After Joint Replacement International Conference on Biomedical Engineering 2008 Conference Paper INDIVIDUAL AUTHOR	2008
Miniplates Orientation For Fracture Fixation Of The Mandibular Condyle 4th Kuala Lumpur International Conference on Biomedical Engineering Conference Paper INDIVIDUAL AUTHOR	2008
Micro-Modelling And Analysis Of Actual And Idealized Cancellous Structure IFMBE PROCEEDINGS Publication In Web Of Science CO-AUTHOR	2008
Micro-Modelling And Analysis Of Actual And Idealised Cancellous Structure 4th Kuala Lumpur International Conference on Biomedical Engineering Conference Paper INDIVIDUAL AUTHOR	2008
Deformation And Stresses In Electronic Package Due To Thermal Cycling Advances in Thermo-Fluids Book Chapter INDIVIDUAL AUTHOR	2008
Thermally-Induced Evaluation Of Interfacial Shear Stress In Finned Metal Foam Heat Sink Advances in Thermo-Fluids Book Chapter INDIVIDUAL AUTHOR	2008
Primary Hip Stem Stability: The Effect Of Bone Pathology On Micromotion 2nd International Conference on Mathematical Sciences 2007 (ICoMS 2007) Conference Paper INDIVIDUAL AUTHOR	2007
Thermal Analysis In Optical Waveguides Jurnal Teknologi, 46(D) Journal Article Non Citation-Indexed CO-AUTHOR	2007
Finite Element Simulation Of Proximal Interphalangeal Joint Implants International Conference on Ergonomics, 2007 Conference Paper CO-AUTHOR	2007
Interfacial Conditions Of Cementless Acetabular Cup Prostheses Under Physiological Load ICE 2007 Conference Paper CO-AUTHOR	2007
Biomechanical Analysis Of Semiconstrained And Unconstrained Elbow Replacements ICE 2007 Conference Paper CO-AUTHOR	2007
Biomechanical Analysis Of Semiconstrained And Unconstrained Elbow Replacements International Conference on Ergonomics, 2007 Conference Paper CO-AUTHOR	2007
Interfacial Conditions Of Cementless Acetabular Cup Prostheses Under Physiological Load International Conference on Ergonomics, 2007 Conference Paper CO-AUTHOR	2007
Computational Analysis Of A Stented Abdominal Aortic Aneurysm Model World Engineering Congress 2007 Conference Paper INDIVIDUAL AUTHOR	2007
Finite Element Simulation Of Proximal Interphalangeal Joint Implants ICE 2007 Conference Paper CO-AUTHOR	2007
Addressing Physical Aspects In Numerical Modeling Of Phenomena In Engineering Mechanics RCEE 2007 Conference Paper CO-AUTHOR	2007

Legend : IP CATEGORY IP LEVEL

Intellectual Property Name	Grant Register No.	IP Level	IP Category
CYLINDRICAL IMPLANT WITH BULGING CENTRE AND TWO HOLES	MY-150696-A	NATIONAL	UTILITY INNOVATION
PROSTHETIC FEMORAL STEM FOR HEMIARTHROPLASTY (7)	MY-165711-A	NATIONAL	UTILITY INNOVATION
THREE-PIECE DISC IMPLANT FOR TOTAL DISC ARTHROPLASTY WITH SILICONE GEL AS BEARING	MY-155257-A	NATIONAL	PATENT
SPINE PROSTHESIS FOR ARTHROPLASTY	MY-155906-A	NATIONAL	PATENT
TWO-PIECE DISC IMPLANT FOR TOTAL DISC ARTHROPLASTY WITH TOP PLATE SCREW FIXATION AND BOTTOM PLATE CROWN LOCK	MY- 145396-A	NATIONAL	PATENT
IMPLANT FOR TOTAL ANKLE ARTHROPLASTY WITH SINGLE GROOVE AND SHALLOW PROXIMAL CURVATURE		NATIONAL	PATENT
ANKLE PROSTHESIS FOR ARTHROPLASTY (2)		NATIONAL	PATENT
ANKLE PROSTHESIS FOR ARTHROPLASTY (1)	MY- 147597-A	NATIONAL	PATENT
NON-CONSTRAINED ELBOW IMPLANT WITH RECTANGULAR HOLE ON THE ULNAR COMPONENT	MY- 152658-A	NATIONAL	PATENT
BALL AND SOCKET ELBOW IMPLANT WITH DOUBLE-SIDED AND TRI-TAPERED GROOVES	MY- 149057-A	NATIONAL	PATENT
RECTANGULAR INTERVERTEBRAL CAGE FOR BONE FUSION	MY-154468-A	NATIONAL	PATENT
DOUBLE HELIX IMPLANT FOR INTERVERTEBRAL FUSION	MY- 146139-A	NATIONAL	PATENT
ANATOMICALLY CYRVED INTERVERTEBRAL CAGE WITH PROXIMAL SLOPE	MY- 145173-A	NATIONAL	PATENT
TO COMPARTMENTS INTERVERTERBRAL CAGE WITH ANTERIOR-POSTERIOR AND MEDIAL-LATERAL MINIATURE HOLES	MY-145245-A	NATIONAL	PATENT
INTERVERTEBRAL IMPLANT FOR SPINE FUSION (2)	MY-145247-A	NATIONAL	PATENT
INTERVERTEBRAL IMPLANT FOR SPINE FUSION (1)	MY-154469-A	NATIONAL	PATENT
METACARPOPHALANGEAL PROSTHESIS (6)	MY- 147953-A	NATIONAL	PATENT
METACARPOPHALANGEAL PROSTHESIS (5)	MY-158074-A	NATIONAL	PATENT
TWO-PIECE METACARPOPHALANGEAL IMPLANT WITH CURVED SURFACE CONTACT AND STRENGTHENING RIBS	MY- 149334-A	NATIONAL	PATENT
METACARPOPHALANGEAL PROSTHESIS (3)	MY-144931-A	NATIONAL	PATENT
METACARPOPHALANGEAL PROSTHESIS (2)	MY-145550-A	NATIONAL	PATENT
METACARPOPHALANGEAL PROSTHESIS (1)	MY-172674-A	NATIONAL	PATENT
POLYMER-ON-METAL ACETABULAR CUP WITH WEB-LIKE CENTRAL PROTRUSIONS AND CIRCUMFERENTIAL RIDGES		NATIONAL	PATENT
PROSTHETIC ACETABULAR CUP	MY- 145580-A	NATIONAL	PATENT
ACETABULAR CUP PROSTHESIS	MY-172987-A	NATIONAL	PATENT
ANATOMICALLY CURVED HIP STEM WITH MEDIAL GROOVES AND SUPERIOR WINGS	MY-153140-A	NATIONAL	PATENT
PROSTHETIC FEMORAL STEM FOR HEMIARTHROPLASTY (6)	MY-179299-A	NATIONAL	PATENT
PROSTHETIC FEMORAL STEM FOR HEMIARTHROPLASTY (5)	MY-169582-A	NATIONAL	PATENT
PROSTHETIC FEMORAL STEM FOR HEMIARTHROPLASTY (4)	MY-183585-A	NATIONAL	PATENT
SHORT, LIGHTWEIGHT ANATOMICAL HIP STEM WITH BROAD BODY AND CENTER GAP WITH OR WITHOUT BONE CEMENT	MY-151007-A	NATIONAL	PATENT
PROSTHETIC FEMORAL STEM FOR HEMIARTHROPLASTY (2)	MY-165681-A	NATIONAL	PATENT
LIGHT HYBRID METALLIC HIP STEM WITH PROXIMAL RIDGE AND DISTAL CEMENTED COLUMN	MY-155264-A	NATIONAL	PATENT
ARTIFICIAL HUMAN KNEE JOINT MINI TRIBO SIMULATOR	MY-164239-A	NATIONAL	PATENT
HIP JOINT MINI TRIBO SIMULATOR	MY-168009-A	NATIONAL	PATENT
ANKLE JOINT MINI TRIBO SIMULATOR	MY-151789-A	NATIONAL	PATENT
A SYSTEMATIC METHOD FOR DESIGNING A VENTILATION SYSTEM LAYOUT IN A BUS PASSENGER COMPARTMENT FOR REDUCING ITS INDOOR AIR CONTAMINANTS CONCENTRATION.	LY2017005567	NATIONAL	COPYRIGHT

Legend : SESSION LEVEL OF STUDY STATUS SUPERVISION LEVEL

Supervision List
NOOR EMILIA BINTI AHMAD SHAFIE REDUCING INDOOR AIR CONTAMINANTS INSIDE A CAMPUS BUS PASSENGER COMPARTMENT PHD GRADUATED CO-SUPERVISOR 2015
FAWAZ AHMED GHALEB NOMAN EFFECT OF VENTILATION FAN ON THERMAL COMFORT IN A MEDIUM SIZE MOSQUE PHD GRADUATED CO-SUPERVISOR 2017
WONG KENG YINN MEDICAL STAFF'S MOVEMENT EFFECTS ON PARTICLE COUNTS IN A SURGICAL ZONE PHD GRADUATED CO-SUPERVISOR 2018
YAHYA AHMED AHMED AL DUQRI DEVELOPMENT AND VALIDATION OF A TWO-SLEEVE ROTARY COMPRESSOR UNDER POLYTROPIC CONDITIONS PHD GRADUATED CO-SUPERVISOR 2021
MOHD AIZAD SAZRUL BIN SABRUDIN THERMAL COMFORT ENHANCEMENT FOR A PASSENGER CAR CABIN PHD ON GOING CO-SUPERVISOR
NORHASHIMAH BINTI MOHD SHAFFIAR MASTER GRADUATED CO-SUPERVISOR 2005
FARIZANA BT JASWADI EXPERIMENTAL AND FINITE ELEMENT INVESTIGATION OF DYNAMIC BEHAVIOR OF CHASSIS - PCB ASSEMBLY OF ELECTRONIC PRODUCTS MASTER GRADUATED SUPERVISOR 2009
HASLINA BINTI ABDULLAH THE EFFECT OF GEOMETRY OF PROSTHESIS ON THE STABILITY OF HIP JOINT ARTHROPLASTY USING FINITE ELEMENT METHOD MASTER GRADUATED SUPERVISOR 2012
SHARIFAH NUR AI SHIKIN BT SYED NOH DAMAGE-BASED MODEL FOR ELECTROMIGRATION-INDUCED FAILURE IN THROUGH-SILICON-VIA (TSV) INTERCONNECTS MASTER GRADUATED SUPERVISOR 2013
INTAN SABARIAH BINTI SABRI NUMERICAL SIMULATIONS ON THE EFFECTS OF USING VENTILATION FAN ON CONDITIONS OF AIR INSIDE A CAR PASSENGER COMPARTMENT MASTER GRADUATED CO-SUPERVISOR 2013
WONG KENG YINN MEDICAL STAFF'S MOVEMENT EFFECTS ON PARTICLE COUNTS IN A SURGICAL ZONE. MASTER GRADUATED CO-SUPERVISOR 2015
NOR ILHAM BINTI AZMAN MASTER GRADUATED CO-SUPERVISOR 2017
MOHD MIRZA FERDAOUS BIN AMSAIN MASTER GRADUATED CO-SUPERVISOR 2019
ALIA SOFIA BINTI NORAZAM NUMERICAL STUDY ON THE EFFECTS OF REGENERATION TEMPERATURE ON DEHUMIDIFICATION PERFORMANCE OF DESICCANT MATERIALS MASTER GRADUATED CO-SUPERVISOR 2020
MOHAMAD ZAHID BIN MAZLAN COMPUTATIONAL FLUID DYNAMICS ANALYSIS AND OPTIMIZATION OF HIGHWAY SAVONIUS WIND TURBINE INTEGRATED WITH GUIDE VANES MASTER GRADUATED CO-SUPERVISOR 2021